rcPTP1588ClkAccuracy

RUGGEDCOM-PTP1588-MIB · .1.3.6.1.4.1.15004.4.12.1.26
MIB view Table view

Object

scalar r/w Enumeration 
This parameter allows the user to configure the desired clock accuracy. This
represents the instantaneous value of the time offset between master and slave
clocks. The system will generate an alarm if the time offset from the master
exceeds the desired accuracy. This mib object is supported only for OC and
OC+TC clock type.

Context

MIB
RUGGEDCOM-PTP1588-MIB
OID
.1.3.6.1.4.1.15004.4.12.1.26
Type
scalar
Access
readwrite
Status
current
Parent
rcPTP1588Base
Siblings
25

Syntax

Enumeration

Values & Constraints

Enumerated Values
0timeAccurateTo50ns
1timeAccurateTo100ns
2timeAccurateTo250ns
3timeAccurateTo1us
4timeAccurateTo2to5us
5timeAccurateTo10us
6timeAccurateTo25us
7timeAccurateTo100us
8timeAccurateTo250us
9timeAccurateTo1ms
10timeAccurateTo2to5ms
11timeAccurateTo10ms
12timeAccurateTo25ms
13timeAccurateTo100ms
14timeAccurateTo250ms

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcPTP1588ClkType
PTP1588 Clock Type.
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.1
rcPTP1588ServoStatus
It Shows the status of clock servo. Clock servo mechanism is use to discipline the system clock. The lock status represents clock accuracy is with in the desired limits. User migh…
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.15004.4.12.1.10
rcPTP1588SlaveFeqAdj
This parameter shows the current amount of discipline applied to the local frequency reference (TCXO), i.e. the amount of correction on this system required to syntonize to the cu…
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.15004.4.12.1.11
rcPTP1588E2EDelay
This parameter shows measured E2E (also called request-response) delay between master and slave clocks
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.15004.4.12.1.12
rcPTP1588GlobalEnable
True if PTP is enabled globally.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.15004.4.12.1.13
rcPTP1588GlobalP2PRequestInterval
The PTP (Precision Time Protocol) Announce interval (mean time interval between successive Announce messages) in seconds. Interpretation placed on the value: 1: Announce value is …
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.14
rcPTP1588GlobalE2ERequestInterval
The PTP (Precision Time Protocol) Announce interval (mean time interval between successive Announce messages) in seconds. Interpretation placed on the value: 1: Announce value is …
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.15
rcPTP1588Global1Step
True if PTP is enabled globally.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.15004.4.12.1.16
rcPTP1588ClkAnnounceInt
The PTP (Precision Time Protocol) Announce interval (mean time interval between successive Announce messages) in seconds. Interpretation placed on the value: 1: Announce value is …
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.17
rcPTP1588ClkAnnounceRcTout
The AnnounceReceiptTimeout, an integral multiple of announceInterval.
scalarInteger32.1.3.6.1.4.1.15004.4.12.1.18
rcPTP1588ClkSyncInt
The PTP (Precision Time Protocol) Sync interval (mean time interval between successive Sync messages). Interpretation placed on the value: 1: Sync interval value is 125 Millisecon…
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.19
rcPTP1588EthPorts
Selects which Ethernet ports will take part in PTP (Precision Time Protocol) message exchanges.
scalarQ-BRIDGE-MIBPortList.1.3.6.1.4.1.15004.4.12.1.2
rcPTP1588ClkDelayMech
The propagation delay measuring option used by the port. For IEEE C37.238 compliant implementations this value shall be 2 (p2p).
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.20
rcPTP1588ClkProfileId
Indicates the PTP Profile in use.
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.21
rcPTP1588ClkDomainNumber
Selects the PTP (Precision Time Protocol) domain number. A PTP domain is a logical grouping of PTP clocks that synchronize to each other using the PTP protocol.
scalarUnsigned32.1.3.6.1.4.1.15004.4.12.1.22
rcPTP1588ClkNetProtocol
Indicates Network Protocol in use. For IEEE C37.238 compliant implementations this value shall be 1 (ieee8023).
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.23
rcPTP1588ClkVlanId
Indicates VLAN ID in use. -2 = PVID -1 = Priority tagged 0 = Untagged 1 to 4094 = VID set
scalarInteger32.1.3.6.1.4.1.15004.4.12.1.24
rcPTP1588ClkPriority
Indicates VLAN tag Priority in use.
scalarUnsigned32.1.3.6.1.4.1.15004.4.12.1.25
rcPTP1588StartUpWait
This parameter in seconds provides the ability to bootstrap the PTP network in an orderly fashion.
scalarInteger32.1.3.6.1.4.1.15004.4.12.1.3
rcPTP1588NetClass
This parameter indicates all devices in the timing plane are IEEE1588 aware (IEEE1588 network) or whether the timing plane includes non-IEEE1588 devices as well (non-IEEE1588 net…
scalarEnumeration.1.3.6.1.4.1.15004.4.12.1.4
rcPTP1588SlaveEthPort
Selects the Ethernet port which will act as the Slave port when the device is configured as a Boundary Clock.
scalarQ-BRIDGE-MIBPortList.1.3.6.1.4.1.15004.4.12.1.5
rcPTP1588SlaveDomain
Selects the PTP (Precision Time Protocol) domain number for the Slave Clock. A PTP domain is a logical grouping of PTP clocks that synchronize to each other using the PTP protoco…
scalarInteger32.1.3.6.1.4.1.15004.4.12.1.6
rcPTP1588SlaveAutoReg
This parameter is specific to unicast transport. This parameter allows user to auto register the slave clock to unicast master as specified by the 'Master IP Address' attribute.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.15004.4.12.1.7
rcPTP1588SlaveMasteIP
This parameter is specific to unicast transport and represents the IP address of the unicast PTP (Precision Time Protocol) master clock.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.15004.4.12.1.8
rcPTP1588SlaveBackUpIP
This parameter is specific to unicast transport and represents the IP address of the unicast backup PTP (Precision Time Protocol) master clock.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.15004.4.12.1.9