rcDot11NetworkSsidTxSuppress
RUGGEDCOM-DOT11-MIB ·
.1.3.6.1.4.1.15004.4.4.2.7
Object
Setting the value of this object to 'true(1)' will suppress sending
SSID information by Wireless Access Point(AP).
Setting the value of this object to 'false(2)' will allow sending SSID
information by AP.
Context
- MIB
- RUGGEDCOM-DOT11-MIB
- OID
.1.3.6.1.4.1.15004.4.4.2.7- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcDot11NetworkParams
- Siblings
- 14
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcDot11NetworkPhyMode The wireless mode running on the wireless network.
Setting the value of this object to 'auto(1)' will allow Access Point
to select the wireless mode.
Settin… | scalar | Enumeration | .1.3.6.1.4.1.15004.4.4.2.1 |
| rcDot11NetworkTxPower Maximum RF transmission power of the wireless interface. | scalar | Integer32 | .1.3.6.1.4.1.15004.4.4.2.10 |
| rcDot11NetworkWdsEnable The Wireless Distribution System (WDS) support.
WDS is simply a mechanism for constructing 802.11 frames using the
4-address format.
Setting the value of this object … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.11 |
| rcDot11NetworkWmmEnable The Wireless Multimedia Support (WMM) is, actually QoS support for the
wireless interface.
Setting the value of this object to 'true(1)' enables the QoS support.
… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.12 |
| rcDot11NetworkTxShortPreamble Setting the value of this object to 'true(1)' allows sending short
preamble block in the frames during wireless communication.
Setting the value of this object to 'fals… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.13 |
| rcDot11NetworkDistance The distance (in meters) between AP and the farthest station.
It allows to optimize the wireless communication parameters, especially
for running wireless links over long distance… | scalar | Integer32 | .1.3.6.1.4.1.15004.4.4.2.14 |
| rcDot11NetworkAssociatedStations Number of connected station(s) in the wireless network. | scalar | Unsigned32 | .1.3.6.1.4.1.15004.4.4.2.15 |
| rcDot11NetworkDesiredSsid The Service Set ID (SSID). This value is a unique name which is used
to identify the wireless network for an Access Point(AP). | scalar | OctetString | .1.3.6.1.4.1.15004.4.4.2.2 |
| rcDot11NetworkPrimarySsid The Service Set ID (SSID). This value is a unique name which is used
to identify the Primary Network for a ClientBridge or ClientIpBridge.
Note that for wireless clien… | scalar | OctetString | .1.3.6.1.4.1.15004.4.4.2.3 |
| rcDot11NetworkSecondary1Ssid The Service Set ID (SSID). This value is a unique name which is used
to identify the First secondary network (Secondary 1) for a
ClientBridge or ClientIpBridge.
Note t… | scalar | OctetString | .1.3.6.1.4.1.15004.4.4.2.4 |
| rcDot11NetworkSecondary2Ssid The Service Set ID (SSID). This value is a unique name which is used
to identify the Second Secondary network (Secondary 2) for a
ClientBridge or ClientIpBridge.
Note… | scalar | OctetString | .1.3.6.1.4.1.15004.4.4.2.5 |
| rcDot11NetworkRfChannel RF communication channel for the wireless interface.
All devices in the same Basic Service Set ID (BSSID) must be
communicating on the same channel in order to functi… | scalar | Integer32 | .1.3.6.1.4.1.15004.4.4.2.6 |
| rcDot11NetworkRfTxEnable Setting the value of this object to 'true(1)' enables the RF
transmitter of wireless interface.
Setting the value of t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.8 |
| rcDot11NetworkRate Data link rate (in Mbps) of the wireless interface.
'best(1)' - Choose the best data link rate for the interface.
'mbps1(2)' - 1 Mbps
'mbps2(3)' - 2 Mbps… | scalar | Enumeration | .1.3.6.1.4.1.15004.4.4.2.9 |