rcDot11NetworkRate
RUGGEDCOM-DOT11-MIB ·
.1.3.6.1.4.1.15004.4.4.2.9
Object
scalar
r/w
Enumeration
Data link rate (in Mbps) of the wireless interface.
'best(1)' - Choose the best data link rate for the interface.
'mbps1(2)' - 1 Mbps
'mbps2(3)' - 2 Mbps
'mbps11(4)' - 11 Mbps
'mbps12(5)' - 12 Mbps
'mbps18(6)' - 18 Mbps
'mbps24(7)' - 24 Mbps
'mbps36(8)' - 26 Mbps
'mbps48(9)' - 48 Mbps
'mbps54(10)' - 54 Mpbs.
Context
- MIB
- RUGGEDCOM-DOT11-MIB
- OID
.1.3.6.1.4.1.15004.4.4.2.9- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcDot11NetworkParams
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | best |
2 | mbps1 |
3 | mbps2 |
4 | mbps11 |
5 | mbps12 |
6 | mbps18 |
7 | mbps24 |
8 | mbps36 |
9 | mbps48 |
10 | mbps54 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcDot11NetworkPhyMode The wireless mode running on the wireless network.
Setting the value of this object to 'auto(1)' will allow Access Point
to select the wireless mode.
Settin… | scalar | Enumeration | .1.3.6.1.4.1.15004.4.4.2.1 |
| rcDot11NetworkTxPower Maximum RF transmission power of the wireless interface. | scalar | Integer32 | .1.3.6.1.4.1.15004.4.4.2.10 |
| rcDot11NetworkWdsEnable The Wireless Distribution System (WDS) support.
WDS is simply a mechanism for constructing 802.11 frames using the
4-address format.
Setting the value of this object … | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.11 |
| rcDot11NetworkWmmEnable The Wireless Multimedia Support (WMM) is, actually QoS support for the
wireless interface.
Setting the value of this object to 'true(1)' enables the QoS support.
… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.12 |
| rcDot11NetworkTxShortPreamble Setting the value of this object to 'true(1)' allows sending short
preamble block in the frames during wireless communication.
Setting the value of this object to 'fals… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.13 |
| rcDot11NetworkDistance The distance (in meters) between AP and the farthest station.
It allows to optimize the wireless communication parameters, especially
for running wireless links over long distance… | scalar | Integer32 | .1.3.6.1.4.1.15004.4.4.2.14 |
| rcDot11NetworkAssociatedStations Number of connected station(s) in the wireless network. | scalar | Unsigned32 | .1.3.6.1.4.1.15004.4.4.2.15 |
| rcDot11NetworkDesiredSsid The Service Set ID (SSID). This value is a unique name which is used
to identify the wireless network for an Access Point(AP). | scalar | OctetString | .1.3.6.1.4.1.15004.4.4.2.2 |
| rcDot11NetworkPrimarySsid The Service Set ID (SSID). This value is a unique name which is used
to identify the Primary Network for a ClientBridge or ClientIpBridge.
Note that for wireless clien… | scalar | OctetString | .1.3.6.1.4.1.15004.4.4.2.3 |
| rcDot11NetworkSecondary1Ssid The Service Set ID (SSID). This value is a unique name which is used
to identify the First secondary network (Secondary 1) for a
ClientBridge or ClientIpBridge.
Note t… | scalar | OctetString | .1.3.6.1.4.1.15004.4.4.2.4 |
| rcDot11NetworkSecondary2Ssid The Service Set ID (SSID). This value is a unique name which is used
to identify the Second Secondary network (Secondary 2) for a
ClientBridge or ClientIpBridge.
Note… | scalar | OctetString | .1.3.6.1.4.1.15004.4.4.2.5 |
| rcDot11NetworkRfChannel RF communication channel for the wireless interface.
All devices in the same Basic Service Set ID (BSSID) must be
communicating on the same channel in order to functi… | scalar | Integer32 | .1.3.6.1.4.1.15004.4.4.2.6 |
| rcDot11NetworkSsidTxSuppress Setting the value of this object to 'true(1)' will suppress sending
SSID information by Wireless Access Point(AP).
Setting the value of this object to 'false(2)' will… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.7 |
| rcDot11NetworkRfTxEnable Setting the value of this object to 'true(1)' enables the RF
transmitter of wireless interface.
Setting the value of t… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.15004.4.4.2.8 |