ruckusZDWLANConfigWEPKey
RUCKUS-ZD-WLAN-CONFIG-MIB ·
.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.16
Object
column
r/w
OctetString
Enter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455
Context
- MIB
- RUCKUS-ZD-WLAN-CONFIG-MIB
- OID
.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ruckusZDWLANConfigEntry
- Table
- ruckusZDWLANConfigTable
- Siblings
- 32
Syntax
OctetString
Values & Constraints
Object Constraints
range: 10-10
range: 26-26
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ruckusZDWLANID this Wireless LAN(WLAN) ID.Max value:for zd1000 zd1100,128;for zd3000,1024;for
zd5000,2048 | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.1 |
| ruckusZDWLANConfigAuthentication Authentication method choosen for this Wireless LAN. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.10 |
| ruckusZDWLANConfigEncryption Encryption method choosen for this Wireless LAN. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.12 |
| ruckusZDWLANConfigWEPKeyIndex Select the WEP key index for the WEP encryption. | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.15 |
| ruckusZDWLANConfigSSID SSID for this Wireless LAN. It can't be modified after creating it. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.2 |
| ruckusZDWLANConfigWPACipherType Enter the encryption cipher method for the WPA encryption. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.20 |
| ruckusZDWLANConfigWPAKey Enter the Pass-phrase for the WPA encryption.
Specifies the WPA PSK (Wi-Fi Protected Access
Pre Shared key)
If the key length is 64 then all 64 characters should be in hex,
otherw… | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.21 |
| ruckusZDWLANConfigAuthenticationServerID Select the Authentication Server by the registered Server ID.
This server id must exist in table: ruckusZDAAAConfigTable(aaa-authentication) or local. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.25 |
| ruckusZDWLANConfigWirelessClientIsolation set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.28 |
| ruckusZDWLANConfigWirelessWhiteListID make sure client isolation is enabled and then choose one id. | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.29 |
| ruckusZDWLANConfigDescription Description for this Wireless LAN. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.3 |
| ruckusZDWLANConfigZeroITActivation Enable the Zero IT Activation Service of the Wireless LAN or not. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.30 |
| ruckusZDWLANConfigWLANHotspotID Select the Hotspot Server for the Wireless LAN.
0, no hotspot server;
1-32,hotspot server must exist. | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.31 |
| ruckusZDWLANConfigWLANServicePriority Select the QOS service priority for the Wireless LAN. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.32 |
| ruckusZDWLANConfigAccountingServerID Select the (RADIUS) Accounting Server by the registered Server ID.
0,disable;
This server id must exist in table: ruckusZDAAAConfigTable(aaa-accounting) | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.35 |
| ruckusZDWLANConfigAccountingUpdateInterval Enter interval in minutes to update Accounting Server. | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.36 |
| ruckusZDWLANConfigName Name for this Wireless LAN | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.4 |
| ruckusZDWLANConfigUplinkRate Disable or Set the Speed/Rate limiting of uplink. Valid range is 0.10mbps or between
0.25mbps~200.00mbps in 0.25mbps step.
Such as: 'disable', '0.10mbps', '0.25mbps',
'0.5mbps',..… | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.40 |
| ruckusZDWLANConfigDownlinkRate Disable or Set the Speed/Rate limiting of downlink. Valid range is 0.10mbps or between
0.25mbps~200.00mbps in 0.25mbps step.
Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',… | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.41 |
| ruckusZDWLANConfigIGMPSnooping IGMP Snooping state of the WLAN. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.42 |
| ruckusZDWLANConfigVlanID Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged. | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.45 |
| ruckusZDWLANConfigDynamicVLAN Enable the Service of the dynamic Wireless LAN or not.
For 802.1x EAP + MAC Address model,'set' is not supported. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.46 |
| ruckusZDWLANConfig802dot11d Enable 802.11 d. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.47 |
| ruckusZDWLANConfigOfdmonly Enable Ofdm-only. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.48 |
| ruckusZDWLANConfigBSSMinrate set BSS-minrate,if Ofdmonly is disabled,
the value should be: 0, 1, 2, 5.5, 12, 24 (Mbps).
if Ofdmonly is enabled, the value should be: 0, 12, 24 (Mbps),
the default value is 0. | column | OctetString | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.49 |
| ruckusZDWLANConfigHideSSID Hide SSID, not to broadcast it SSID. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.50 |
| ruckusZDWLANConfigTunnelMode Enable Tunnel support capability for the Wireless LAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.52 |
| ruckusZDWLANConfigBackgroundScanning Select Background Scanning support capability for the Wireless LAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.53 |
| ruckusZDWLANConfigMaxClients Select the Number of client devices the AP can service for the Wireless LAN. | column | Integer32 | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.55 |
| ruckusZDWLANConfigWebAuthentication Enable the Wep Authentication or not. | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.60 |
| ruckusZDWLANConfigRowStatus Create, Delete Administration control for this Wireless LAN.
1,ACTIVE state,only for read;
4,CREATEANDGO, create a new table;
6,DESTROY, delete a existing table. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.63 |
| ruckusZDWLANConfigWLANServiceType Select The the Service type for the Wireless LAN.
for hotSpotService,only read-only | column | Enumeration | .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.8 |