ruckusZDWLANConfigBSSMinrate

RUCKUS-ZD-WLAN-CONFIG-MIB · .1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.49
MIB view Table view

Object

column r/w OctetString 
set BSS-minrate,if Ofdmonly is disabled,
the value should be: 0, 1, 2, 5.5, 12, 24 (Mbps).
if Ofdmonly is enabled, the value should be: 0, 12, 24 (Mbps),
the default value is 0.

Context

MIB
RUCKUS-ZD-WLAN-CONFIG-MIB
OID
.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.49
Type
column
Access
readwrite
Status
current
Parent
ruckusZDWLANConfigEntry
Table
ruckusZDWLANConfigTable
Siblings
32

Syntax

OctetString

Values & Constraints

Object Constraints
range: 1-15

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ruckusZDWLANID
this Wireless LAN(WLAN) ID.Max value:for zd1000 zd1100,128;for zd3000,1024;for zd5000,2048
columnInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.1
ruckusZDWLANConfigAuthentication
Authentication method choosen for this Wireless LAN.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.10
ruckusZDWLANConfigEncryption
Encryption method choosen for this Wireless LAN.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.12
ruckusZDWLANConfigWEPKeyIndex
Select the WEP key index for the WEP encryption.
columnInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.15
ruckusZDWLANConfigWEPKey
Enter the Pass-phrase for the WEP encryption method. Only 10 or 26 Hex character.such as: 1122334455
columnOctetString.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.16
ruckusZDWLANConfigSSID
SSID for this Wireless LAN. It can't be modified after creating it.
columnOctetString.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.2
ruckusZDWLANConfigWPACipherType
Enter the encryption cipher method for the WPA encryption.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.20
ruckusZDWLANConfigWPAKey
Enter the Pass-phrase for the WPA encryption. Specifies the WPA PSK (Wi-Fi Protected Access Pre Shared key) If the key length is 64 then all 64 characters should be in hex, otherw…
columnOctetString.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.21
ruckusZDWLANConfigAuthenticationServerID
Select the Authentication Server by the registered Server ID. This server id must exist in table: ruckusZDAAAConfigTable(aaa-authentication) or local.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.25
ruckusZDWLANConfigWirelessClientIsolation
set Wireless Client Isolation, clients will be unable to communicate with each other, or access any of the restricted subnet.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.28
ruckusZDWLANConfigWirelessWhiteListID
make sure client isolation is enabled and then choose one id.
columnInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.29
ruckusZDWLANConfigDescription
Description for this Wireless LAN.
columnOctetString.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.3
ruckusZDWLANConfigZeroITActivation
Enable the Zero IT Activation Service of the Wireless LAN or not.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.30
ruckusZDWLANConfigWLANHotspotID
Select the Hotspot Server for the Wireless LAN. 0, no hotspot server; 1-32,hotspot server must exist.
columnInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.31
ruckusZDWLANConfigWLANServicePriority
Select the QOS service priority for the Wireless LAN.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.32
ruckusZDWLANConfigAccountingServerID
Select the (RADIUS) Accounting Server by the registered Server ID. 0,disable; This server id must exist in table: ruckusZDAAAConfigTable(aaa-accounting)
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.35
ruckusZDWLANConfigAccountingUpdateInterval
Enter interval in minutes to update Accounting Server.
columnInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.36
ruckusZDWLANConfigName
Name for this Wireless LAN
columnOctetString.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.4
ruckusZDWLANConfigUplinkRate
Disable or Set the Speed/Rate limiting of uplink. Valid range is 0.10mbps or between 0.25mbps~200.00mbps in 0.25mbps step. Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',..…
columnOctetString.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.40
ruckusZDWLANConfigDownlinkRate
Disable or Set the Speed/Rate limiting of downlink. Valid range is 0.10mbps or between 0.25mbps~200.00mbps in 0.25mbps step. Such as: 'disable', '0.10mbps', '0.25mbps', '0.5mbps',…
columnOctetString.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.41
ruckusZDWLANConfigIGMPSnooping
IGMP Snooping state of the WLAN.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.42
ruckusZDWLANConfigVlanID
Specifies the VLAN ID of the WLAN. If VLAN ID is 1, packets from this WLAN will be untagged.
columnInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.45
ruckusZDWLANConfigDynamicVLAN
Enable the Service of the dynamic Wireless LAN or not. For 802.1x EAP + MAC Address model,'set' is not supported.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.46
ruckusZDWLANConfig802dot11d
Enable 802.11 d.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.47
ruckusZDWLANConfigOfdmonly
Enable Ofdm-only.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.48
ruckusZDWLANConfigHideSSID
Hide SSID, not to broadcast it SSID.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.50
ruckusZDWLANConfigTunnelMode
Enable Tunnel support capability for the Wireless LAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.52
ruckusZDWLANConfigBackgroundScanning
Select Background Scanning support capability for the Wireless LAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.53
ruckusZDWLANConfigMaxClients
Select the Number of client devices the AP can service for the Wireless LAN.
columnInteger32.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.55
ruckusZDWLANConfigWebAuthentication
Enable the Wep Authentication or not.
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.60
ruckusZDWLANConfigRowStatus
Create, Delete Administration control for this Wireless LAN. 1,ACTIVE state,only for read; 4,CREATEANDGO, create a new table; 6,DESTROY, delete a existing table.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.63
ruckusZDWLANConfigWLANServiceType
Select The the Service type for the Wireless LAN. for hotSpotService,only read-only
columnEnumeration.1.3.6.1.4.1.25053.1.2.2.2.1.1.1.1.8