rectifierStartUpDelay
RPS-SC300-MIB ·
.1.3.6.1.4.1.1918.2.14.10.60.110
Object
scalar
r/w
s TimeIntervalInSeconds
The delay from AC turn-on before the rectifier output turns on. This is in addition to the fixed rectifier hardware charge time.
Context
- MIB
- RPS-SC300-MIB
- OID
.1.3.6.1.4.1.1918.2.14.10.60.110- Type
- scalar
- Access
- readwrite
- Status
- current
- Units
- s
- Parent
- rectifiers
- Siblings
- 22
Syntax
s TimeIntervalInSeconds
- Source
- TimeIntervalInSeconds
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| numberOfRegisteredRectifiers The number of registered rectifiers. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.10 |
| numberOfRegisteredSolarChargers The number of registered solar chargers. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.11 |
| enableRipPowerShare Power ensures that A and B systems are load balanced. | scalar | EnableState | .1.3.6.1.4.1.1918.2.14.10.60.120 |
| numberOfRectifiersFailed Number of rectifiers that must be replaced or require maintenance. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.13 |
| numberOfSolarFailed Number of solar chargers that must be replaced or require maintenance. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.14 |
| numberOfRectifiersCommsLost Number of rectifiers that the controller can no longer communicate with. They could have been removed from the system or they could have failed. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.17 |
| numberOfSolarCommsLost Number of solar chargers that the controller can no longer communicate with. They could have been removed from the system or they could have failed. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.18 |
| rectifierCurrent The total current output by all rectifiers. This value may be measured by the rectifier current shunt(s) if present, calculated from the other system currents or determined from t… | scalar | A Float | .1.3.6.1.4.1.1918.2.14.10.60.20 |
| rectifierCurrentLimit The output current limit of the rectifier. If set to zero then the output current is maximum. | scalar | A Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.23 |
| solarCurrentLimit The output current limit of the solar converter. If set to zero then the output current is maximum. | scalar | A Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.24 |
| enableCurrentShare When enabled, the rectifier output voltages are adjusted to even (approximately) their output currents. Disable this function if different rectifiers are supplying independent loa… | scalar | EnableState | .1.3.6.1.4.1.1918.2.14.10.60.26 |
| highestRectifierHeatsinkTemperature The highest heatsink temperature of all registered rectifiers. | scalar | °C Float | .1.3.6.1.4.1.1918.2.14.10.60.29 |
| rectifierValuesTable Table for rectifierValues | table | - | .1.3.6.1.4.1.1918.2.14.10.60.30 |
| phase1SerialNumber Phase A Rectifier serial number. All phase become relative to this rectifier's phase. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1918.2.14.10.60.42 |
| acInputCurrent The sum of all currents measured by all rectifiers (AC). | scalar | A Float | .1.3.6.1.4.1.1918.2.14.10.60.43 |
| dcInputCurrent The sum of all currents measured by all Solar Chargers (DC). | scalar | A Float | .1.3.6.1.4.1.1918.2.14.10.60.44 |
| rectifierShutdownMode Specifies whether rectifiers may be shutdown and, if so, whether this is through manual intervention or shutdown automatically to enhance system efficiency by ensuring running rec… | scalar | RectifierShutdownMode | .1.3.6.1.4.1.1918.2.14.10.60.55 |
| restartAllRectifiers Restarts all rectifiers that were shut down by the user or LBRS. | scalar | NoData | .1.3.6.1.4.1.1918.2.14.10.60.60 |
| rectifierShutdownSmartAlarm The smart alarm that will attempt to shutdown all rectifiers. Shutdown must be set to Manual. The recognition period does not apply. Setting Redundancy to N+1/N+2 will shutdown al… | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.65 |
| loadBasedRectifierShutdownConfig | node | - | .1.3.6.1.4.1.1918.2.14.10.60.70 |
| rampUpSlope The ramp-up slope of the rectifier, as a percentage of the rectifier rated current. | scalar | %/s Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.80 |
| ovsdSetPoint Rectifier Over-Voltage Shutdown set point. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.60.90 |