rectifierCurrent
RPS-SC300-MIB ·
.1.3.6.1.4.1.1918.2.14.10.60.20
Object
scalar
A Float
The total current output by all rectifiers. This value may be measured by the rectifier current shunt(s) if present, calculated from the other system currents or determined from the rectifier reported currents.
Context
- MIB
- RPS-SC300-MIB
- OID
.1.3.6.1.4.1.1918.2.14.10.60.20- Type
- scalar
- Access
- readonly
- Status
- current
- Units
- A
- Parent
- rectifiers
- Siblings
- 22
Syntax
A Float
- Source
- Float
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| numberOfRegisteredRectifiers The number of registered rectifiers. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.10 |
| numberOfRegisteredSolarChargers The number of registered solar chargers. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.11 |
| rectifierStartUpDelay The delay from AC turn-on before the rectifier output turns on. This is in addition to the fixed rectifier hardware charge time. | scalar | s TimeIntervalInSeconds | .1.3.6.1.4.1.1918.2.14.10.60.110 |
| enableRipPowerShare Power ensures that A and B systems are load balanced. | scalar | EnableState | .1.3.6.1.4.1.1918.2.14.10.60.120 |
| numberOfRectifiersFailed Number of rectifiers that must be replaced or require maintenance. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.13 |
| numberOfSolarFailed Number of solar chargers that must be replaced or require maintenance. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.14 |
| numberOfRectifiersCommsLost Number of rectifiers that the controller can no longer communicate with. They could have been removed from the system or they could have failed. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.17 |
| numberOfSolarCommsLost Number of solar chargers that the controller can no longer communicate with. They could have been removed from the system or they could have failed. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.18 |
| rectifierCurrentLimit The output current limit of the rectifier. If set to zero then the output current is maximum. | scalar | A Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.23 |
| solarCurrentLimit The output current limit of the solar converter. If set to zero then the output current is maximum. | scalar | A Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.24 |
| enableCurrentShare When enabled, the rectifier output voltages are adjusted to even (approximately) their output currents. Disable this function if different rectifiers are supplying independent loa… | scalar | EnableState | .1.3.6.1.4.1.1918.2.14.10.60.26 |
| highestRectifierHeatsinkTemperature The highest heatsink temperature of all registered rectifiers. | scalar | °C Float | .1.3.6.1.4.1.1918.2.14.10.60.29 |
| rectifierValuesTable Table for rectifierValues | table | - | .1.3.6.1.4.1.1918.2.14.10.60.30 |
| phase1SerialNumber Phase A Rectifier serial number. All phase become relative to this rectifier's phase. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1918.2.14.10.60.42 |
| acInputCurrent The sum of all currents measured by all rectifiers (AC). | scalar | A Float | .1.3.6.1.4.1.1918.2.14.10.60.43 |
| dcInputCurrent The sum of all currents measured by all Solar Chargers (DC). | scalar | A Float | .1.3.6.1.4.1.1918.2.14.10.60.44 |
| rectifierShutdownMode Specifies whether rectifiers may be shutdown and, if so, whether this is through manual intervention or shutdown automatically to enhance system efficiency by ensuring running rec… | scalar | RectifierShutdownMode | .1.3.6.1.4.1.1918.2.14.10.60.55 |
| restartAllRectifiers Restarts all rectifiers that were shut down by the user or LBRS. | scalar | NoData | .1.3.6.1.4.1.1918.2.14.10.60.60 |
| rectifierShutdownSmartAlarm The smart alarm that will attempt to shutdown all rectifiers. Shutdown must be set to Manual. The recognition period does not apply. Setting Redundancy to N+1/N+2 will shutdown al… | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.65 |
| loadBasedRectifierShutdownConfig | node | - | .1.3.6.1.4.1.1918.2.14.10.60.70 |
| rampUpSlope The ramp-up slope of the rectifier, as a percentage of the rectifier rated current. | scalar | %/s Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.60.80 |
| ovsdSetPoint Rectifier Over-Voltage Shutdown set point. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.60.90 |