numberOfSolarCommsLost

RPS-SC300-MIB · .1.3.6.1.4.1.1918.2.14.10.60.18
MIB view Table view

Object

scalar Unsigned8 
Number of solar chargers that the controller can no longer communicate with. They could have been removed from the system or they could have failed.

Context

MIB
RPS-SC300-MIB
OID
.1.3.6.1.4.1.1918.2.14.10.60.18
Type
scalar
Access
readonly
Status
current
Parent
rectifiers
Siblings
22

Syntax

Unsigned8
Source
Unsigned8
Base type
Integer32

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
numberOfRegisteredRectifiers
The number of registered rectifiers.
scalarUnsigned8.1.3.6.1.4.1.1918.2.14.10.60.10
numberOfRegisteredSolarChargers
The number of registered solar chargers.
scalarUnsigned8.1.3.6.1.4.1.1918.2.14.10.60.11
rectifierStartUpDelay
The delay from AC turn-on before the rectifier output turns on. This is in addition to the fixed rectifier hardware charge time.
scalars TimeIntervalInSeconds.1.3.6.1.4.1.1918.2.14.10.60.110
enableRipPowerShare
Power ensures that A and B systems are load balanced.
scalarEnableState.1.3.6.1.4.1.1918.2.14.10.60.120
numberOfRectifiersFailed
Number of rectifiers that must be replaced or require maintenance.
scalarUnsigned8.1.3.6.1.4.1.1918.2.14.10.60.13
numberOfSolarFailed
Number of solar chargers that must be replaced or require maintenance.
scalarUnsigned8.1.3.6.1.4.1.1918.2.14.10.60.14
numberOfRectifiersCommsLost
Number of rectifiers that the controller can no longer communicate with. They could have been removed from the system or they could have failed.
scalarUnsigned8.1.3.6.1.4.1.1918.2.14.10.60.17
rectifierCurrent
The total current output by all rectifiers. This value may be measured by the rectifier current shunt(s) if present, calculated from the other system currents or determined from t…
scalarA Float.1.3.6.1.4.1.1918.2.14.10.60.20
rectifierCurrentLimit
The output current limit of the rectifier. If set to zero then the output current is maximum.
scalarA Unsigned8.1.3.6.1.4.1.1918.2.14.10.60.23
solarCurrentLimit
The output current limit of the solar converter. If set to zero then the output current is maximum.
scalarA Unsigned8.1.3.6.1.4.1.1918.2.14.10.60.24
enableCurrentShare
When enabled, the rectifier output voltages are adjusted to even (approximately) their output currents. Disable this function if different rectifiers are supplying independent loa…
scalarEnableState.1.3.6.1.4.1.1918.2.14.10.60.26
highestRectifierHeatsinkTemperature
The highest heatsink temperature of all registered rectifiers.
scalar°C Float.1.3.6.1.4.1.1918.2.14.10.60.29
rectifierValuesTable
Table for rectifierValues
table-.1.3.6.1.4.1.1918.2.14.10.60.30
phase1SerialNumber
Phase A Rectifier serial number. All phase become relative to this rectifier's phase.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.1918.2.14.10.60.42
acInputCurrent
The sum of all currents measured by all rectifiers (AC).
scalarA Float.1.3.6.1.4.1.1918.2.14.10.60.43
dcInputCurrent
The sum of all currents measured by all Solar Chargers (DC).
scalarA Float.1.3.6.1.4.1.1918.2.14.10.60.44
rectifierShutdownMode
Specifies whether rectifiers may be shutdown and, if so, whether this is through manual intervention or shutdown automatically to enhance system efficiency by ensuring running rec…
scalarRectifierShutdownMode.1.3.6.1.4.1.1918.2.14.10.60.55
restartAllRectifiers
Restarts all rectifiers that were shut down by the user or LBRS.
scalarNoData.1.3.6.1.4.1.1918.2.14.10.60.60
rectifierShutdownSmartAlarm
The smart alarm that will attempt to shutdown all rectifiers. Shutdown must be set to Manual. The recognition period does not apply. Setting Redundancy to N+1/N+2 will shutdown al…
scalarUnsigned8.1.3.6.1.4.1.1918.2.14.10.60.65
loadBasedRectifierShutdownConfignode-.1.3.6.1.4.1.1918.2.14.10.60.70
rampUpSlope
The ramp-up slope of the rectifier, as a percentage of the rectifier rated current.
scalar%/s Unsigned8.1.3.6.1.4.1.1918.2.14.10.60.80
ovsdSetPoint
Rectifier Over-Voltage Shutdown set point.
scalar0.01 V Float.1.3.6.1.4.1.1918.2.14.10.60.90