modemRetryInterval

Object

scalar r/w s TimeIntervalInSeconds

If an alarm report dial-out does not connect with a remote modem, then another attempt will be made after this time interval.

Sibling Objects

Object	Type	Syntax	OID
enableModem Determines whether or not the RS232 port is configured to work with a modem.	scalar	EnableState	`.1.3.6.1.4.1.1918.2.14.10.30.53.10`
alarmReport This indicates that the dial-out process will start when an alarm occurs.	scalar	AlarmReport	`.1.3.6.1.4.1.1918.2.14.10.30.53.20`
modemSetUpString The string sent to the modem on reset. The modem AT command should not be included as it is automatically sent. The Auto-Answer Rings parameter is also sent, so it does not need t…	scalar	OctetString	`.1.3.6.1.4.1.1918.2.14.10.30.53.30`
modemAutoAnswerRings Number of rings before an incoming call is answered. Setting this parameter to zero disables incoming calls (the modem can still be used for alarm reporting).	scalar	Unsigned8	`.1.3.6.1.4.1.1918.2.14.10.30.53.40`
portSettings	node	-	`.1.3.6.1.4.1.1918.2.14.10.30.53.5`
modemMaximumRetries If an alarm report dial-out does not connect with a remote modem, then this number of subsequent alarm report attempts will be made on the current dial-out number before trying th…	scalar	Unsigned8	`.1.3.6.1.4.1.1918.2.14.10.30.53.50`
modemPowerReset If this is enabled, then an attempt will be made to reset a non-operating modem by turning its power supply off and on using digital output 2.	scalar	EnableState	`.1.3.6.1.4.1.1918.2.14.10.30.53.70`
dialOutNumberTable Table for dialOutNumber	table	-	`.1.3.6.1.4.1.1918.2.14.10.30.53.80`
smsNotificationTable Table for smsNotification	table	-	`.1.3.6.1.4.1.1918.2.14.10.30.53.90`