modemPowerReset

RPS-SC300-MIB · .1.3.6.1.4.1.1918.2.14.10.30.53.70
MIB view Table view

Object

scalar r/w EnableState 
If this is enabled, then an attempt will be made to reset a non-operating modem by turning its power supply off and on using digital output 2.

Context

MIB
RPS-SC300-MIB
OID
.1.3.6.1.4.1.1918.2.14.10.30.53.70
Type
scalar
Access
readwrite
Status
current
Parent
serial
Siblings
9

Syntax

EnableState
Source
EnableState
Base type
Enumeration

Values & Constraints

Type Values
0disabled
1enabled

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
enableModem
Determines whether or not the RS232 port is configured to work with a modem.
scalarEnableState.1.3.6.1.4.1.1918.2.14.10.30.53.10
alarmReport
This indicates that the dial-out process will start when an alarm occurs.
scalarAlarmReport.1.3.6.1.4.1.1918.2.14.10.30.53.20
modemSetUpString
The string sent to the modem on reset. The modem AT command should not be included as it is automatically sent. The Auto-Answer Rings parameter is also sent, so it does not need t…
scalarOctetString.1.3.6.1.4.1.1918.2.14.10.30.53.30
modemAutoAnswerRings
Number of rings before an incoming call is answered. Setting this parameter to zero disables incoming calls (the modem can still be used for alarm reporting).
scalarUnsigned8.1.3.6.1.4.1.1918.2.14.10.30.53.40
portSettingsnode-.1.3.6.1.4.1.1918.2.14.10.30.53.5
modemMaximumRetries
If an alarm report dial-out does not connect with a remote modem, then this number of subsequent alarm report attempts will be made on the current dial-out number before trying th…
scalarUnsigned8.1.3.6.1.4.1.1918.2.14.10.30.53.50
modemRetryInterval
If an alarm report dial-out does not connect with a remote modem, then another attempt will be made after this time interval.
scalars TimeIntervalInSeconds.1.3.6.1.4.1.1918.2.14.10.30.53.60
dialOutNumberTable
Table for dialOutNumber
table-.1.3.6.1.4.1.1918.2.14.10.30.53.80
smsNotificationTable
Table for smsNotification
table-.1.3.6.1.4.1.1918.2.14.10.30.53.90