midPointMonitoring
RPS-SC300-MIB ·
.1.3.6.1.4.1.1918.2.14.10.100.50
Object
node
No description available.
Context
- MIB
- RPS-SC300-MIB
- OID
.1.3.6.1.4.1.1918.2.14.10.100.50- Type
- node
- Status
- current
- Parent
- battery
- Siblings
- 14
- Children
- 11
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| batteryCapacity The rated 10-hour (C10) capacity of the battery. 0 = no battery is installed. | scalar | Ah SNMPv2-SMIInteger32 | .1.3.6.1.4.1.1918.2.14.10.100.10 |
| cellsPerString The number of 2V battery cells per string. Zero means no battery is installed. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.100.20 |
| batteryTemperature The average of all analog inputs configured as battery temperature inputs. | scalar | °C Float | .1.3.6.1.4.1.1918.2.14.10.100.30 |
| batteryCurrent The total current flowing to/from the batteries. If positive, the battery is being charged. This value may be measured by the battery current shunt(s) if present or calculated fro… | scalar | A Float | .1.3.6.1.4.1.1918.2.14.10.100.40 |
| batteryType The name or type of the battery. | scalar | OctetString | .1.3.6.1.4.1.1918.2.14.10.100.42 |
| btrTimeRemaining An estimate of the time remaining until the average cell discharge voltage reaches the configured end voltage. This value is only available during a discharge if the battery has b… | scalar | min TimeIntervalInMinutes | .1.3.6.1.4.1.1918.2.14.10.100.43 |
| btrStateOfHealth The health of the battery measured as the estimated C10 capacity at the end of the last discharge as a percentage of the configured capacity. The accuracy of this value depends on… | scalar | % Percentile8Nan | .1.3.6.1.4.1.1918.2.14.10.100.44 |
| batteryChargeState Indicates the current state of the battery. | scalar | BatteryChargeState | .1.3.6.1.4.1.1918.2.14.10.100.45 |
| batteryStateThreshold The threshold used to determine the battery state. If the battery current is greater than the value, the battery state is Charge. If the battery current is less than the negative … | scalar | 0.1 A Float | .1.3.6.1.4.1.1918.2.14.10.100.47 |
| endOfChargeAction To ensure that there is no residual AhD error at the end of the charge, AhD can be set to zero after each charge. For new installations, Set Ah Discharged to zero after Equalize a… | scalar | EndOfChargeAction | .1.3.6.1.4.1.1918.2.14.10.100.48 |
| batteryDesign | node | - | .1.3.6.1.4.1.1918.2.14.10.100.49 |
| batteryTimeRemaining | node | - | .1.3.6.1.4.1.1918.2.14.10.100.60 |
| batteryCharacterizationDataTable Table for batteryCharacterizationData | table | - | .1.3.6.1.4.1.1918.2.14.10.100.62 |
| siteBackupTimeSettings | node | - | .1.3.6.1.4.1.1918.2.14.10.100.65 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| currentBsmThreshold Indicates the current calculated BSM threshold. | scalar | 0.1 % Float | .1.3.6.1.4.1.1918.2.14.10.100.50.100 |
| referenceVoltage Midpoint reference voltage. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.100.50.105 |
| clearStringFail This command attempts to reset string state. | scalar | NoData | .1.3.6.1.4.1.1918.2.14.10.100.50.110 |
| bsmLockoutPeriod Time period from when battery ceases discharging or the completion of Fast Charge, Equalize or Battery Test during which Battery Symmetry Monitoring shall not operate. | scalar | min TimeIntervalInMinutes | .1.3.6.1.4.1.1918.2.14.10.100.50.20 |
| bsmConvergencePeriod Time period from start of the Battery Symmetry Monitoring process. During this period the BSM threshold is calculated via linear interpolation using BSM Start Threshold, Stable Th… | scalar | min TimeIntervalInMinutes | .1.3.6.1.4.1.1918.2.14.10.100.50.30 |
| stringFailRecognitionPeriod If the cell point voltage divergence of a battery string is continuously over threshold for this time, the string is deemed faulty. | scalar | min TimeIntervalInMinutes | .1.3.6.1.4.1.1918.2.14.10.100.50.40 |
| bsmStartThreshold Battery Symmetry Monitoring start threshold, defined as percentage of bus voltage. | scalar | 0.1 % Float | .1.3.6.1.4.1.1918.2.14.10.100.50.50 |
| bsmStableThreshold Battery Symmetry Monitoring stable threshold, defined as percentage of bus voltage. | scalar | 0.1 % Float | .1.3.6.1.4.1.1918.2.14.10.100.50.60 |
| midpointMonitoringStringTable Table for midpointMonitoringString | table | - | .1.3.6.1.4.1.1918.2.14.10.100.50.70 |
| bsmState Indicates the current state of the BSM process. | scalar | BsmState | .1.3.6.1.4.1.1918.2.14.10.100.50.80 |
| timeInThisState Indicates the time period that the current BSM state has been running for. | scalar | min TimeIntervalInMinutes | .1.3.6.1.4.1.1918.2.14.10.100.50.90 |