equalizeStartAllowed
RPS-SC300-MIB ·
.1.3.6.1.4.1.1918.2.14.10.70.30.9
Object
scalar
CanStart
Indicates if an Equalize cycle is allowed to start or the reason why not. An Equalize cycle cannot start if there are no rectifiers with AC power.
Context
- MIB
- RPS-SC300-MIB
- OID
.1.3.6.1.4.1.1918.2.14.10.70.30.9- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- equalize
- Siblings
- 12
Syntax
CanStart
- Source
- CanStart
- Base type
Enumeration
Values & Constraints
Type Values
190 | started |
191 | canStart |
192 | busy |
193 | disabled |
194 | alarmsActive |
195 | sensorFailed |
196 | batteryNotCharged |
197 | noRectifiersNorSolarAvailable |
198 | rectifierOvsd |
199 | noBatteryConfigured |
200 | loadCurrentTooLow |
201 | acFailed |
202 | manualStop |
203 | batteryNotDischarged |
204 | acStateUnavailable |
205 | systemOverloaded |
206 | noPeakLoadReduction |
207 | inLockout |
208 | rectifiersFailed |
209 | rectifiersCommsLost |
210 | systemInOverload |
211 | batteryFuseFail |
212 | batteryTestFail |
213 | bAcFailed |
214 | bAcStateUnavailable |
215 | bNoBatteryConfigured |
216 | bSensorFailed |
217 | bNoRectifiersNorSolarAvailable |
218 | bRectifiersFailed |
219 | bRectifiersCommsLost |
220 | bSystemInOverload |
221 | bBatteryFuseFail |
222 | bBusy |
223 | bBatteryTestFail |
224 | bSystemOverloaded |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| equalizeState Indicates the state of the Equalize process: Disabled, Inactive or Active. | scalar | ControlProcessState | .1.3.6.1.4.1.1918.2.14.10.70.30.10 |
| startEqualize This command attempts to start the Equalize process. | scalar | NoData | .1.3.6.1.4.1.1918.2.14.10.70.30.100 |
| stopEqualize This command stops the Equalize process if it is currently active. | scalar | NoData | .1.3.6.1.4.1.1918.2.14.10.70.30.110 |
| equalizeVoltage The bus voltage maintained during an Equalize cycle. The bus voltage is further adjusted by Temperature Compensation. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.30.12 |
| equalizeSmartAlarm The smart alarm that will attempt to start and stop Equalize. To disable set to 0. The recognition period does not apply to start equalize. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.70.30.120 |
| equalizeOffsetVoltage The adjustment to the bus voltage being applied due to the Equalize process. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.30.13 |
| periodicEqualizeFirstDateTime The date and time that the first scheduled Equalize will occur. Subsequent Equalize cycles will occur at every Equalize Interval thereafter. | scalar | JulianDateUtc25 | .1.3.6.1.4.1.1918.2.14.10.70.30.15 |
| equalizeInterval The time between scheduled Equalize cycles. The interval period begins at the start of an Equalize. Zero disables scheduled Equalizes. | scalar | d TimeIntervalInDays | .1.3.6.1.4.1.1918.2.14.10.70.30.17 |
| nextEqualizeStartTime The start time of the next scheduled Equalize cycle. The value is NaN if Equalize is active or Periodic Equalize function is disabled. | scalar | JulianDateUtc25 | .1.3.6.1.4.1.1918.2.14.10.70.30.20 |
| equalizeDuration The duration of a scheduled Equalize. | scalar | min TimeIntervalInMinutes | .1.3.6.1.4.1.1918.2.14.10.70.30.30 |
| equalizeRemainingTime The time until the current Equalize cycle will stop. The value is NaN if the Equalize is inactive. | scalar | s TimeIntervalInSeconds | .1.3.6.1.4.1.1918.2.14.10.70.30.40 |
| enableEqualize Applies a controlled overcharge to the battery by raising the charge voltage for a set time. This may be required to ensure all cells are fully charged, remove sulphation, or redi… | scalar | EnableState | .1.3.6.1.4.1.1918.2.14.10.70.30.5 |