dcdc
RPS-SC300-MIB ·
.1.3.6.1.4.1.1918.2.14.10.106
Object
node
No description available.
Context
- MIB
- RPS-SC300-MIB
- OID
.1.3.6.1.4.1.1918.2.14.10.106- Type
- node
- Status
- current
- Parent
- rpsObjects
- Siblings
- 17
- Children
- 16
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| systemIdentity | node | - | .1.3.6.1.4.1.1918.2.14.10.10 |
| battery | node | - | .1.3.6.1.4.1.1918.2.14.10.100 |
| solar | node | - | .1.3.6.1.4.1.1918.2.14.10.105 |
| log | node | - | .1.3.6.1.4.1.1918.2.14.10.107 |
| internal | node | - | .1.3.6.1.4.1.1918.2.14.10.108 |
| alarms | node | - | .1.3.6.1.4.1.1918.2.14.10.110 |
| trap700Bindings | node | - | .1.3.6.1.4.1.1918.2.14.10.111 |
| controller | node | - | .1.3.6.1.4.1.1918.2.14.10.20 |
| communications | node | - | .1.3.6.1.4.1.1918.2.14.10.30 |
| accessControl | node | - | .1.3.6.1.4.1.1918.2.14.10.33 |
| acInput | node | - | .1.3.6.1.4.1.1918.2.14.10.40 |
| dcOutput | node | - | .1.3.6.1.4.1.1918.2.14.10.50 |
| rxp | node | - | .1.3.6.1.4.1.1918.2.14.10.55 |
| rectifiers | node | - | .1.3.6.1.4.1.1918.2.14.10.60 |
| controlFunctions | node | - | .1.3.6.1.4.1.1918.2.14.10.70 |
| realTimeClock | node | - | .1.3.6.1.4.1.1918.2.14.10.80 |
| inputOutput | node | - | .1.3.6.1.4.1.1918.2.14.10.90 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dcdcType The output voltage type. | scalar | DcdcHardwareType | .1.3.6.1.4.1.1918.2.14.10.106.10 |
| dcdc48vOutputVoltageSetpoint The 48V DCDC output voltage. Batteries are normally set to 54.4V. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.106.100 |
| dcdcCurrentLimit Current limit | scalar | 0.01 A Float | .1.3.6.1.4.1.1918.2.14.10.106.110 |
| dcdc12vCurrentLimit Current limit setting must never be set above maximum value stated in the MCU module product data sheet – otherwise damage may occur | scalar | 0.01 A Float | .1.3.6.1.4.1.1918.2.14.10.106.120 |
| dcdc24vCurrentLimit Current limit setting must never be set above maximum value stated in the MCU module product data sheet – otherwise damage may occur | scalar | 0.01 A Float | .1.3.6.1.4.1.1918.2.14.10.106.130 |
| dcdc48vCurrentLimit Current limit setting must never be set above maximum value stated in the MCU module product data sheet – otherwise damage may occur | scalar | 0.01 A Float | .1.3.6.1.4.1.1918.2.14.10.106.140 |
| dcdcInputVoltageItem The item name of DCDC input voltage. Normally this will be Bus-Voltage. Optionally append ':' then the index. | scalar | OctetString | .1.3.6.1.4.1.1918.2.14.10.106.150 |
| dcdcInputVoltage The DCDC Input Voltage. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.106.160 |
| dcdcVoltage The maximum output voltage. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.106.20 |
| dcdcCurrent The total current. | scalar | A Float | .1.3.6.1.4.1.1918.2.14.10.106.30 |
| dcdcPower The total power. | scalar | W DcPower | .1.3.6.1.4.1.1918.2.14.10.106.40 |
| dcdcHeatsinkTemperature The highest heatsink temperature. | scalar | °C Float | .1.3.6.1.4.1.1918.2.14.10.106.50 |
| numberOfRegisteredDcdcConverters The number of registered DC-DC converters. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.106.60 |
| dcdcOutputVoltageSetpoint Output voltage setpoint | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.106.70 |
| dcdc12vOutputVoltageSetpoint The 12V DCDC output voltage. Batteries are normally set to 13.75V. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.106.80 |
| dcdc24vOutputVoltageSetpoint The 24V DCDC output voltage. Batteries are normally set to 27.33V. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.106.90 |