batteryCharacterizationDataTable

RPS-SC300-MIB · .1.3.6.1.4.1.1918.2.14.10.100.62

MIB view Table view

Object

table

Table for batteryCharacterizationData

Context

MIB: RPS-SC300-MIB
OID: .1.3.6.1.4.1.1918.2.14.10.100.62
Type: table
Status: current
Parent: battery
Siblings: 14
Children: 1

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
batteryCapacity The rated 10-hour (C10) capacity of the battery. 0 = no battery is installed.	scalar	Ah SNMPv2-SMIInteger32	`.1.3.6.1.4.1.1918.2.14.10.100.10`
cellsPerString The number of 2V battery cells per string. Zero means no battery is installed.	scalar	Unsigned8	`.1.3.6.1.4.1.1918.2.14.10.100.20`
batteryTemperature The average of all analog inputs configured as battery temperature inputs.	scalar	°C Float	`.1.3.6.1.4.1.1918.2.14.10.100.30`
batteryCurrent The total current flowing to/from the batteries. If positive, the battery is being charged. This value may be measured by the battery current shunt(s) if present or calculated fro…	scalar	A Float	`.1.3.6.1.4.1.1918.2.14.10.100.40`
batteryType The name or type of the battery.	scalar	OctetString	`.1.3.6.1.4.1.1918.2.14.10.100.42`
btrTimeRemaining An estimate of the time remaining until the average cell discharge voltage reaches the configured end voltage. This value is only available during a discharge if the battery has b…	scalar	min TimeIntervalInMinutes	`.1.3.6.1.4.1.1918.2.14.10.100.43`
btrStateOfHealth The health of the battery measured as the estimated C10 capacity at the end of the last discharge as a percentage of the configured capacity. The accuracy of this value depends on…	scalar	% Percentile8Nan	`.1.3.6.1.4.1.1918.2.14.10.100.44`
batteryChargeState Indicates the current state of the battery.	scalar	BatteryChargeState	`.1.3.6.1.4.1.1918.2.14.10.100.45`
batteryStateThreshold The threshold used to determine the battery state. If the battery current is greater than the value, the battery state is Charge. If the battery current is less than the negative …	scalar	0.1 A Float	`.1.3.6.1.4.1.1918.2.14.10.100.47`
endOfChargeAction To ensure that there is no residual AhD error at the end of the charge, AhD can be set to zero after each charge. For new installations, Set Ah Discharged to zero after Equalize a…	scalar	EndOfChargeAction	`.1.3.6.1.4.1.1918.2.14.10.100.48`
batteryDesign	node	-	`.1.3.6.1.4.1.1918.2.14.10.100.49`
midPointMonitoring	node	-	`.1.3.6.1.4.1.1918.2.14.10.100.50`
batteryTimeRemaining	node	-	`.1.3.6.1.4.1.1918.2.14.10.100.60`
siteBackupTimeSettings	node	-	`.1.3.6.1.4.1.1918.2.14.10.100.65`

Child Objects