alternativeFloatStatus
RPS-SC300-MIB ·
.1.3.6.1.4.1.1918.2.14.10.70.10.13
Object
scalar
ControlProcessState
Indicates the state of Alternative-Float-Voltage: Disabled, Inactive, or Active (currently being used instead of Float-Voltage).
Context
- MIB
- RPS-SC300-MIB
- OID
.1.3.6.1.4.1.1918.2.14.10.70.10.13- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- voltageControl
- Siblings
- 11
Syntax
ControlProcessState
- Source
- ControlProcessState
- Base type
Enumeration
Values & Constraints
Type Values
0 | disabled |
1 | active |
2 | inactive |
3 | pending |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| floatVoltage The voltage required to maintain optimum battery charge (at the nominal ambient temperature). Use the value recommended by the battery manufacturer. The bus voltage may be adjuste… | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.10.10 |
| alternativeFloatVoltage When Alternative-Charge is operating it will charge float at this voltage. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.10.11 |
| alternativeFloatSmartAlarm The smart alarm that will enable float charging at Alternative-Float-Voltage instead of Float-Voltage. | scalar | Unsigned8 | .1.3.6.1.4.1.1918.2.14.10.70.10.12 |
| maximumSystemVoltage Many control functions adjust the bus voltage depending on their respective conditions. However, under no circumstances will the controller deliberately exceed this value. A faili… | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.10.15 |
| minimumSystemVoltage Many control functions adjust the bus voltage depending on their respective conditions. However, under no circumstances will the controller deliberately adjust the bus voltage to … | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.10.17 |
| busVoltage The system bus voltage from the bus voltage sensor. If the bus voltage sensor has failed, the system bus voltage is determined from the rectifier output voltages. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.10.20 |
| targetVoltage The voltage maintained by AVC. AVC will set the Base Voltage to attempt to maintain the bus voltage to this value. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.10.30 |
| enableActiveVoltageControl When AVC is enabled the rectifier output voltage is adjusted to maintain the bus voltage at the configured float voltage (plus or minus any adjustments by active control processes… | scalar | EnableState | .1.3.6.1.4.1.1918.2.14.10.70.10.35 |
| avcState The state of the Active Voltage Control (AVC) process. | scalar | AvcState | .1.3.6.1.4.1.1918.2.14.10.70.10.40 |
| avcOffset The difference between the Target Voltage and the measured bus voltage. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.10.50 |
| baseVoltage The voltage sent to the rectifiers. This is the Target Voltage plus the AVC Offset. | scalar | 0.01 V Float | .1.3.6.1.4.1.1918.2.14.10.70.10.60 |