alarmConfiguration

RPS-SC300-MIB · .1.3.6.1.4.1.1918.2.14.10.110.15
MIB view Table view

Object

node

No description available.

Context

MIB
RPS-SC300-MIB
OID
.1.3.6.1.4.1.1918.2.14.10.110.15
Type
node
Status
current
Parent
alarms
Siblings
9
Children
22

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
alarmTable
Table for alarm
table-.1.3.6.1.4.1.1918.2.14.10.110.10
smartAlarmTable
Table for smartAlarm
table-.1.3.6.1.4.1.1918.2.14.10.110.20
smartAlarmCountReset
This command clears source counts.
scalarNoData.1.3.6.1.4.1.1918.2.14.10.110.25
sourceAlarmTable
Table for sourceAlarm
table-.1.3.6.1.4.1.1918.2.14.10.110.30
sourceScheduleTable
Table for sourceSchedule
table-.1.3.6.1.4.1.1918.2.14.10.110.40
alarmStatesnode-.1.3.6.1.4.1.1918.2.14.10.110.5
systemValueSourceTable
Table for systemValueSource
table-.1.3.6.1.4.1.1918.2.14.10.110.50
sourceManualTable
Table for sourceManual
table-.1.3.6.1.4.1.1918.2.14.10.110.60
smartAlarmNamedItemsTable
Table for smartAlarmNamedItems
table-.1.3.6.1.4.1.1918.2.14.10.110.70
Child Objects
ObjectTypeSyntaxOID
enableAudibleAlarmIndication
Enable/disable audible alarm indication.
scalarEnableState.1.3.6.1.4.1.1918.2.14.10.110.15.10
batteryTemperatureHighThreshold
Battery Temperature High alarm is activated if the battery temperature is above this value.
scalar°C Signed8.1.3.6.1.4.1.1918.2.14.10.110.15.130
batteryTemperatureLowThreshold
Battery Temperature Low alarm is activated if the battery temperature is below this value.
scalar°C Signed8.1.3.6.1.4.1.1918.2.14.10.110.15.140
systemOverloadType
The controller can detect a system overload either based on a simple load threshold or based on a redundancy calculation taking into account individual rectifier capacities.
scalarOverloadAlarmType.1.3.6.1.4.1.1918.2.14.10.110.15.170
systemOverloadTypeB
The controller can detect a system overload either based on a simple load threshold or based on a redundancy calculation taking into account individual rectifier capacities.
scalarOverloadAlarmType.1.3.6.1.4.1.1918.2.14.10.110.15.171
systemOverloadRecognitionPeriod
The System Overload alarm activates if the condition (see System Overload Type) has been continuously true for this time. It is normally set to several hours so that the alarm doe…
scalarmin TimeIntervalInMinutes.1.3.6.1.4.1.1918.2.14.10.110.15.180
systemOverloadThreshold
The System Overload alarm activates if the load is above this threshold continuously for the System Overload Recognition Period. Measured as a percentage of total rectifier capaci…
scalar% Unsigned8.1.3.6.1.4.1.1918.2.14.10.110.15.190
systemOverloadThresholdB
The System Overload alarm activates if the load is above this threshold continuously for the System Overload Recognition Period. Measured as a percentage of total rectifier capaci…
scalar% Unsigned8.1.3.6.1.4.1.1918.2.14.10.110.15.191
alarmRecognitionPeriod
An alarm condition must be continuously active for this period before an alarm is generated.
scalars TimeIntervalInSeconds.1.3.6.1.4.1.1918.2.14.10.110.15.20
inDischargeAlarmCondition
This specifies if AC present is required for In Discharge alarm to be active.
scalarInDischargeAlarmCondition.1.3.6.1.4.1.1918.2.14.10.110.15.200
batteryCurrentSensorFailRecognitionPeriod
If the battery current sensor continuously does not report a valid current for this time, the battery current sensor will be considered failed.
scalars TimeIntervalInSeconds.1.3.6.1.4.1.1918.2.14.10.110.15.220
lowRectifierCapacityRedundancy
Redundancy capacity is a percentage of useable rectifier capacity.
scalar% Unsigned8.1.3.6.1.4.1.1918.2.14.10.110.15.240
lowRectifierCapacityAlarmThreshold
Percentage of Low-Rectifier-Capacity to trigger the Low-Rectifier-Capacity alarm.
scalar% Unsigned8.1.3.6.1.4.1.1918.2.14.10.110.15.250
lowRectifierCapacityRecognitionPeriod
The Low-Rectifier-Capacity-Alarm activates if the condition has been continuously true for this time.
scalarmin TimeIntervalInMinutes.1.3.6.1.4.1.1918.2.14.10.110.15.252
rectifierCapacityBalance
The proportion of capacity available to the A side of an A+B system. i.e. 100% means the B side is off.
scalar% Percentile8Nan.1.3.6.1.4.1.1918.2.14.10.110.15.260
acFailRecognitionPeriod
An AC fail condition must be continuously active for this period before an AC Fail alarm is generated.
scalars TimeIntervalInSeconds.1.3.6.1.4.1.1918.2.14.10.110.15.30
enableHighFloatTracking
The alarm thresholds will be increased when the operating voltage is raised by a voltage control function.
scalarEnableState.1.3.6.1.4.1.1918.2.14.10.110.15.40
highFloatThreshold
High Float alarm is activated if the bus voltage is above this value.
scalar0.01 V Float.1.3.6.1.4.1.1918.2.14.10.110.15.50
enableLowFloatTracking
The alarm thresholds will be reduced when the operating voltage is lowered by a voltage control function.
scalarEnableState.1.3.6.1.4.1.1918.2.14.10.110.15.60
lowFloatThreshold
Low Float alarm is activated when the bus voltage is below this value.
scalar0.01 V Float.1.3.6.1.4.1.1918.2.14.10.110.15.70
highLoadThreshold
High Load alarm is activated if the bus voltage is above this value.
scalar0.01 V Float.1.3.6.1.4.1.1918.2.14.10.110.15.80
lowLoadThreshold
The Low Load alarm is activated if the bus voltage is below this value.
scalar0.01 V Float.1.3.6.1.4.1.1918.2.14.10.110.15.90