unit4MsgStatus

RITTAL-CMC-TC-MIB · .1.3.6.1.4.1.2606.4.2.6.7.2.1.3

Object

column mandatory Enumeration

Actual message status
1: not available
2: configuration has changed (sensor new, changed, lost)
3: error
4: OK
5: alarm, e.g. smoke, vibration...
6: warning of analog value, value reached warning threshold
7: analog value too low, value reached low threshold
8: analog value too high, value reached high threshold
9: output is set to OFF
10: output is set to ON
11: door is open
12: door is closed
13: door is locked
14: door is unlocked by remote input, e.g. external cardreader
15: door is unlocked by reader or keypad connected to I2C
16: door is unlocked by SNMP set command (unit1OutputSet)
17: door is unlocked by WEB
18: door is unlocked by timer
19: no access, wrong keycode or cardnumber
20: orientation of PSM-Unit is circuit 1
21: orientation of PSM-Unit is circuit 2
22: battery low, wireless sensor

Context

MIB: RITTAL-CMC-TC-MIB
OID: .1.3.6.1.4.1.2606.4.2.6.7.2.1.3
Type: column
Access: readonly
Status: mandatory
Parent: cmcTcUnit4MsgEntry
Table: cmcTcUnit4MsgTable
Siblings: 10

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	notAvail
`2`	configChanged
`3`	error
`4`	ok
`5`	alarm
`6`	warning
`7`	tooLow
`8`	tooHigh
`9`	setOff
`10`	setOn
`11`	open
`12`	closed
`13`	locked
`14`	unlRemote
`15`	unlReaderKeypad
`16`	unlSNMP
`17`	unlWEB
`18`	unlTimer
`19`	noAccess
`20`	circuit1
`21`	circuit2
`22`	lowBatt

Related Objects

Sibling Objects

Object	Type	Syntax	OID
unit4MsgIndex mandatory Index for the list of alarm entries. Its value ranges between 1 and the value of cmcTcUnit4NumberOfMsgs.	column	Integer32	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.1`
unit4MsgQuit mandatory Reset of this alarm 1: auto 2: manual, alarm needs confirmation, e. g. with 'C' key	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.10`
unit4MsgDelay mandatory Delay of alarm condition	column	Integer32	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.11`
unit4MsgText mandatory Descriptional text for each message (entry in the table)	column	OctetString	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.2`
unit4MsgRelay mandatory Setup of Alarm relay for this alarm 1: no switching of alarm relay 2: switching of alarm relay	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.4`
unit4MsgBeeper mandatory Setup of Alarm beeper for this alarm 1: no audible alarm 2: audible alarm	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.5`
unit4MsgTrap1 mandatory Trap receiver 1 activated	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.6`
unit4MsgTrap2 mandatory Trap receiver 2 activated	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.7`
unit4MsgTrap3 mandatory Trap receiver 3 activated	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.8`
unit4MsgTrap4 mandatory Trap receiver 4 and Event Logging activated	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.6.7.2.1.9`