unit3OutputType

RITTAL-CMC-TC-MIB · .1.3.6.1.4.1.2606.4.2.5.6.2.1.2

Object

column mandatory Enumeration

Type of output which is connected to sensor unit 3 to output[unit3OutputIndex]
1:        no output connected
2:        output failure
3:        value overflow
4:        output type 1, door locking TS8,Ergoform
5:        output type 2, universal lock 1, lock with power
6:        output type 3, universal lock 2, unlock with power
7:        output type 4, fan relay
8:        output type 5, fan controlled
9:        output type 6, universal relay output
10:       output type 7, room door lock 
11:       output type 8, power output
12:       output type 9, door lock with Master key
13:       output type 10, door lock FR(i)
14:	setpoint (FCS, RTT)
15:	setpoint temperature monitoring (RTT)
16:	hysteresis of setpoint (RCT)
17:	command for remote control of RCT
18:	relay PSM, 1=On, 0=Off
19:	high setpoint current monitoring PSM
20:	low setpoint current monitoring PSM
21:	setpoint temperature RTT
22:	setpoint temperature monitoring RTT
23:	power output 20A
24:	door magnet (automatic door release)
30:	control mode LCP
31:	min fan speed (fan control) LCP
32:	min delta T (fan control) LCP
33:	max delta T (fan control) LCP
34:	PID controller, KP, LCP
35:	PID controller, KI, LCP
36	PID controller, KD, LCP
37	flowrate flowmeter, LCP
38:	cw value of water (default: 4187) LCP
39:	deltaT, LCP
40:	control mode, LCP
42:	setpoint high voltage PSM
43:	setpoint low voltage PSM
44:	setpoint high current PSM
45:	setpoint low current PSM
46:	command PSM

Context

MIB: RITTAL-CMC-TC-MIB
OID: .1.3.6.1.4.1.2606.4.2.5.6.2.1.2
Type: column
Access: readonly
Status: mandatory
Parent: cmcTcUnit3OutputEntry
Table: cmcTcUnit3OutputTable
Siblings: 8

Syntax

Enumeration

Values & Constraints

Enumerated Values

`1`	notAvail
`2`	failure
`3`	overflow
`4`	doorLock
`5`	univLock1
`6`	univLock2
`7`	fan
`8`	fanSpeedContr
`9`	universalOut
`10`	roomLock
`11`	powerOut
`12`	doorLockMaster
`13`	doorLockFRi
`14`	setpoint
`15`	setpointTimax
`16`	hysteresisRCT
`17`	commandRCT
`18`	relayPSM
`19`	setHighPSM
`20`	setLowPSM
`21`	setpointRTT
`22`	setTimaxRTT
`23`	powerOut1
`24`	doorMagnet
`30`	controlModeLCP
`31`	minFanSpeedLCP
`32`	minDeltaTLCP
`33`	maxDeltaTLCP
`34`	kPLCP
`35`	kILCP
`36`	kDLCP
`37`	flowRateLCP
`38`	cwValueLCP
`39`	deltaTLCP
`40`	ctrModLCP
`42`	voltHighPSM
`43`	voltLowPSM
`44`	ampHighPSM
`45`	ampLowPSM
`46`	commandPSM

Related Objects

Sibling Objects

Object	Type	Syntax	OID
unit3OutputIndex mandatory Index for the list of output entries. Its value ranges between 1 and the value of cmcTcUnit3NumberOfOutputs.	column	Integer32	`.1.3.6.1.4.1.2606.4.2.5.6.2.1.1`
unit3OutputText mandatory Descriptional text for each output (entry in the table)	column	OctetString	`.1.3.6.1.4.1.2606.4.2.5.6.2.1.3`
unit3OutputStatus mandatory Actual status of the output	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.5.6.2.1.4`
unit3OutputValue mandatory Value for output	column	Integer32	`.1.3.6.1.4.1.2606.4.2.5.6.2.1.5`
unit3OutputSet mandatory Command for output	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.5.6.2.1.6`
unit3OutputConfig mandatory Configuration for output 1: disable remote control (e.g. keypad) 2: enable remote control	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.5.6.2.1.7`
unit3OutputDelay mandatory Unsigned Value for delay, after this time the output will fall into the previous state	column	Integer32	`.1.3.6.1.4.1.2606.4.2.5.6.2.1.8`
unit3OutputTimeoutAction mandatory State for output if timeout (RS422) occurs	column	Enumeration	`.1.3.6.1.4.1.2606.4.2.5.6.2.1.9`