x25StatResetTimeouts
RFC1382-MIB ·
.1.3.6.1.2.1.10.5.3.1.20
Object
The number of times the T22 reset timer expired.
Context
- MIB
- RFC1382-MIB
- OID
.1.3.6.1.2.1.10.5.3.1.20- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- x25StatEntry
- Table
- x25StatTable
- Siblings
- 24
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x25StatIndex mandatory The ifIndex value for the X.25 interface. | column | RFC1381-MIBIfIndexType | .1.3.6.1.2.1.10.5.3.1.1 |
| x25StatInInterrupts mandatory The number of interrupt packets received by
the PLE or over the PVC/VC. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.10 |
| x25StatOutCallAttempts mandatory The number of calls attempted. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.11 |
| x25StatOutCallFailures mandatory The number of call attempts which failed.
This includes calls that were cleared
because of restrictive fast select. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.12 |
| x25StatOutInterrupts mandatory The number of interrupt packets send by the
PLE or over the PVC/VC. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.13 |
| x25StatOutDataPackets mandatory The number of data packets sent by this
PLE. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.14 |
| x25StatOutgoingCircuits mandatory The number of active outgoing circuits.
This includes call requests sent but not yet
confirmed. This does not count PVCs. | column | RFC1155-SMIGauge | .1.3.6.1.2.1.10.5.3.1.15 |
| x25StatIncomingCircuits mandatory The number of active Incoming Circuits.
This includes call indications received but
not yet acknowledged. This does not count
PVCs. | column | RFC1155-SMIGauge | .1.3.6.1.2.1.10.5.3.1.16 |
| x25StatTwowayCircuits mandatory The number of active two-way Circuits.
This includes call requests sent but not yet
confirmed. This does not count PVCs. | column | RFC1155-SMIGauge | .1.3.6.1.2.1.10.5.3.1.17 |
| x25StatRestartTimeouts mandatory The number of times the T20 restart timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.18 |
| x25StatCallTimeouts mandatory The number of times the T21 call timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.19 |
| x25StatInCalls mandatory The number of incoming calls received. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.2 |
| x25StatClearTimeouts mandatory The number of times the T23 clear timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.21 |
| x25StatDataRxmtTimeouts mandatory The number of times the T25 data timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.22 |
| x25StatInterruptTimeouts mandatory The number of times the T26 interrupt timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.23 |
| x25StatRetryCountExceededs mandatory The number of times a retry counter was
exhausted. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.24 |
| x25StatClearCountExceededs mandatory The number of times the R23 clear count was
exceeded. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.25 |
| x25StatInCallRefusals mandatory The number of incoming calls refused. This
includes calls refused by the PLE and by
higher layers. This also includes calls
cleared because of restricted fast select. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.3 |
| x25StatInProviderInitiatedClears mandatory The number of clear requests with a cause
code other than DTE initiated. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.4 |
| x25StatInRemotelyInitiatedResets mandatory The number of reset requests received with
cause code DTE initiated. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.5 |
| x25StatInProviderInitiatedResets mandatory The number of reset requests received with
cause code other than DTE initiated. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.6 |
| x25StatInRestarts mandatory The number of remotely initiated (including
provider initiated) restarts experienced by
the PLE excluding the restart associated
with bringing up the PLE interface. This
only cou… | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.7 |
| x25StatInDataPackets mandatory The number of data packets received. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.8 |
| x25StatInAccusedOfProtocolErrors mandatory The number of packets received containing a
procedure error cause code. These include
clear, reset, restart, or diagnostic
packets. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.9 |