x25StatInRestarts
RFC1382-MIB ·
.1.3.6.1.2.1.10.5.3.1.7
Object
The number of remotely initiated (including provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE interface. This only counts restarts received when the PLE already has an established connection with the remove PLE.
Context
- MIB
- RFC1382-MIB
- OID
.1.3.6.1.2.1.10.5.3.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- x25StatEntry
- Table
- x25StatTable
- Siblings
- 24
Syntax
RFC1155-SMICounter
- Source
- RFC1155-SMICounter
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x25StatIndex mandatory The ifIndex value for the X.25 interface. | column | RFC1381-MIBIfIndexType | .1.3.6.1.2.1.10.5.3.1.1 |
| x25StatInInterrupts mandatory The number of interrupt packets received by
the PLE or over the PVC/VC. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.10 |
| x25StatOutCallAttempts mandatory The number of calls attempted. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.11 |
| x25StatOutCallFailures mandatory The number of call attempts which failed.
This includes calls that were cleared
because of restrictive fast select. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.12 |
| x25StatOutInterrupts mandatory The number of interrupt packets send by the
PLE or over the PVC/VC. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.13 |
| x25StatOutDataPackets mandatory The number of data packets sent by this
PLE. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.14 |
| x25StatOutgoingCircuits mandatory The number of active outgoing circuits.
This includes call requests sent but not yet
confirmed. This does not count PVCs. | column | RFC1155-SMIGauge | .1.3.6.1.2.1.10.5.3.1.15 |
| x25StatIncomingCircuits mandatory The number of active Incoming Circuits.
This includes call indications received but
not yet acknowledged. This does not count
PVCs. | column | RFC1155-SMIGauge | .1.3.6.1.2.1.10.5.3.1.16 |
| x25StatTwowayCircuits mandatory The number of active two-way Circuits.
This includes call requests sent but not yet
confirmed. This does not count PVCs. | column | RFC1155-SMIGauge | .1.3.6.1.2.1.10.5.3.1.17 |
| x25StatRestartTimeouts mandatory The number of times the T20 restart timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.18 |
| x25StatCallTimeouts mandatory The number of times the T21 call timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.19 |
| x25StatInCalls mandatory The number of incoming calls received. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.2 |
| x25StatResetTimeouts mandatory The number of times the T22 reset timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.20 |
| x25StatClearTimeouts mandatory The number of times the T23 clear timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.21 |
| x25StatDataRxmtTimeouts mandatory The number of times the T25 data timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.22 |
| x25StatInterruptTimeouts mandatory The number of times the T26 interrupt timer
expired. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.23 |
| x25StatRetryCountExceededs mandatory The number of times a retry counter was
exhausted. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.24 |
| x25StatClearCountExceededs mandatory The number of times the R23 clear count was
exceeded. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.25 |
| x25StatInCallRefusals mandatory The number of incoming calls refused. This
includes calls refused by the PLE and by
higher layers. This also includes calls
cleared because of restricted fast select. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.3 |
| x25StatInProviderInitiatedClears mandatory The number of clear requests with a cause
code other than DTE initiated. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.4 |
| x25StatInRemotelyInitiatedResets mandatory The number of reset requests received with
cause code DTE initiated. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.5 |
| x25StatInProviderInitiatedResets mandatory The number of reset requests received with
cause code other than DTE initiated. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.6 |
| x25StatInDataPackets mandatory The number of data packets received. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.8 |
| x25StatInAccusedOfProtocolErrors mandatory The number of packets received containing a
procedure error cause code. These include
clear, reset, restart, or diagnostic
packets. | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.5.3.1.9 |