x25StatInCallRefusals

RFC1382-MIB · .1.3.6.1.2.1.10.5.3.1.3
MIB view Table view

Object

column mandatory RFC1155-SMICounter 
The number of incoming calls refused.  This
includes calls refused by the PLE and by
higher layers.  This also includes calls
cleared because of restricted fast select.

Context

MIB
RFC1382-MIB
OID
.1.3.6.1.2.1.10.5.3.1.3
Type
column
Access
readonly
Status
mandatory
Parent
x25StatEntry
Table
x25StatTable
Siblings
24

Syntax

RFC1155-SMICounter
Source
RFC1155-SMICounter
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
x25StatIndex mandatory
The ifIndex value for the X.25 interface.
columnRFC1381-MIBIfIndexType.1.3.6.1.2.1.10.5.3.1.1
x25StatInInterrupts mandatory
The number of interrupt packets received by the PLE or over the PVC/VC.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.10
x25StatOutCallAttempts mandatory
The number of calls attempted.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.11
x25StatOutCallFailures mandatory
The number of call attempts which failed. This includes calls that were cleared because of restrictive fast select.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.12
x25StatOutInterrupts mandatory
The number of interrupt packets send by the PLE or over the PVC/VC.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.13
x25StatOutDataPackets mandatory
The number of data packets sent by this PLE.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.14
x25StatOutgoingCircuits mandatory
The number of active outgoing circuits. This includes call requests sent but not yet confirmed. This does not count PVCs.
columnRFC1155-SMIGauge.1.3.6.1.2.1.10.5.3.1.15
x25StatIncomingCircuits mandatory
The number of active Incoming Circuits. This includes call indications received but not yet acknowledged. This does not count PVCs.
columnRFC1155-SMIGauge.1.3.6.1.2.1.10.5.3.1.16
x25StatTwowayCircuits mandatory
The number of active two-way Circuits. This includes call requests sent but not yet confirmed. This does not count PVCs.
columnRFC1155-SMIGauge.1.3.6.1.2.1.10.5.3.1.17
x25StatRestartTimeouts mandatory
The number of times the T20 restart timer expired.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.18
x25StatCallTimeouts mandatory
The number of times the T21 call timer expired.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.19
x25StatInCalls mandatory
The number of incoming calls received.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.2
x25StatResetTimeouts mandatory
The number of times the T22 reset timer expired.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.20
x25StatClearTimeouts mandatory
The number of times the T23 clear timer expired.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.21
x25StatDataRxmtTimeouts mandatory
The number of times the T25 data timer expired.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.22
x25StatInterruptTimeouts mandatory
The number of times the T26 interrupt timer expired.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.23
x25StatRetryCountExceededs mandatory
The number of times a retry counter was exhausted.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.24
x25StatClearCountExceededs mandatory
The number of times the R23 clear count was exceeded.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.25
x25StatInProviderInitiatedClears mandatory
The number of clear requests with a cause code other than DTE initiated.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.4
x25StatInRemotelyInitiatedResets mandatory
The number of reset requests received with cause code DTE initiated.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.5
x25StatInProviderInitiatedResets mandatory
The number of reset requests received with cause code other than DTE initiated.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.6
x25StatInRestarts mandatory
The number of remotely initiated (including provider initiated) restarts experienced by the PLE excluding the restart associated with bringing up the PLE interface. This only cou…
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.7
x25StatInDataPackets mandatory
The number of data packets received.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.8
x25StatInAccusedOfProtocolErrors mandatory
The number of packets received containing a procedure error cause code. These include clear, reset, restart, or diagnostic packets.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.3.1.9