x25CircuitStatus

RFC1382-MIB · .1.3.6.1.2.1.10.5.5.1.3
MIB view Table view

Object

column mandatory r/w Enumeration 
This object reports the current status of
the circuit.
              
An existing instance of this object can only
be set to startClear, startPvcResetting, or
invalid.  An instance with the value calling
or open can only be set to startClear and
that action will start clearing the circuit.
An instance with the value PVC can only be
set to startPvcResetting or invalid and that
action resets the PVC or deletes the circuit
respectively.  The values startClear or
startPvcResetting will never be returned by
an agent.  An attempt to set the status of
an existing instance to a value other than
one of these values will result in an error.
              
A non-existing instance can be set to PVC to
create a PVC if the implementation supports
dynamic creation of PVCs.  Some
implementations may only allow creation and
deletion of PVCs if the interface is down.
Since the instance identifier will supply
the PLE index and the channel number,
setting this object alone supplies
sufficient information to create the
instance.  All the DEFVAL clauses for the
other objects of this table are appropriate
for creating a PVC; PLEs creating entries
for placed or accepted calls will use values
appropriate for the call rather than the
value of the DEFVAL clause.  Two managers
trying to create the same PVC can determine
from the return code which manager succeeded
and which failed (the failing manager fails
because it can not set a value of PVC for an
existing object).
              
An entry in the closed or invalid state may
be deleted or reused at the agent's
convence.  If the entry is kept in the
closed state, the values of the parameters
associated with the entry must be correct.
Closed implies the values in the circuit
table are correct.
              
The value of invalid indicates the other
values in the table are invalid.  Many
agents may never return a value of invalid
because they dynamically allocate and free
unused table entries.  An agent for a
statically configured systems can return
invalid to indicate the entry has not yet
been used so the counters contain no
information.

Context

MIB
RFC1382-MIB
OID
.1.3.6.1.2.1.10.5.5.1.3
Type
column
Access
readwrite
Status
mandatory
Parent
x25CircuitEntry
Table
x25CircuitTable
Siblings
20

Syntax

Enumeration

Values & Constraints

Enumerated Values
1invalid
2closed
3calling
4open
5clearing
6pvc
7pvcResetting
8startClear
9startPvcResetting
10other

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
x25CircuitIndex mandatory
The ifIndex value for the X.25 Interface.
columnRFC1381-MIBIfIndexType.1.3.6.1.2.1.10.5.5.1.1
x25CircuitInInterrupts mandatory
The number of interrupt packets received for this circuit.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.10
x25CircuitOutOctets mandatory
The number of octets of user data sent for this circuit.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.11
x25CircuitOutPdus mandatory
The number of PDUs sent for this circuit.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.12
x25CircuitOutInterrupts mandatory
The number of interrupt packets sent on this circuit.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.13
x25CircuitDataRetransmissionTimeouts mandatory
The number of times the T25 data retransmission timer expired for this circuit.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.14
x25CircuitResetTimeouts mandatory
The number of times the T22 reset timer expired for this circuit.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.15
x25CircuitInterruptTimeouts mandatory
The number of times the T26 Interrupt timer expired for this circuit.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.16
x25CircuitCallParamId mandatory
This identifies the instance of the x25CallParmIndex for the entry in the x25CallParmTable which contains the call parameters in use with this circuit. The entry referenced must …
columnObjectIdentifier.1.3.6.1.2.1.10.5.5.1.17
x25CircuitCalledDteAddress mandatory
For incoming calls, this is the called address from the call indication packet. For outgoing calls, this is the called address from the call confirmation packet. Th…
columnX121Address.1.3.6.1.2.1.10.5.5.1.18
x25CircuitCallingDteAddress mandatory
For incoming calls, this is the calling address from the call indication packet. For outgoing calls, this is the calling address from the call confirmation packet. This will be ze…
columnX121Address.1.3.6.1.2.1.10.5.5.1.19
x25CircuitChannel mandatory
The channel number for this circuit.
columnInteger32.1.3.6.1.2.1.10.5.5.1.2
x25CircuitOriginallyCalledAddress mandatory
For incoming calls, this is the address in the call Redirection or Call Deflection Notification facility if the call was deflected or redirected, otherwise it will be called addre…
columnX121Address.1.3.6.1.2.1.10.5.5.1.20
x25CircuitDescr mandatory
A descriptive string associated with this circuit. This provides a place for the agent to supply any descriptive information it knows about the use or owner of the circuit. The …
columnOctetString.1.3.6.1.2.1.10.5.5.1.21
x25CircuitEstablishTime mandatory
The value of sysUpTime when the channel was associated with this circuit. For outgoing SVCs, this is the time the first call packet was sent. For incoming SVCs, this is the time…
columnRFC1155-SMITimeTicks.1.3.6.1.2.1.10.5.5.1.4
x25CircuitDirection mandatory
The direction of the call that established this circuit.
columnEnumeration.1.3.6.1.2.1.10.5.5.1.5
x25CircuitInOctets mandatory
The number of octets of user data delivered to upper layer.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.6
x25CircuitInPdus mandatory
The number of PDUs received for this circuit.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.7
x25CircuitInRemotelyInitiatedResets mandatory
The number of Resets received for this circuit with cause code of DTE initiated.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.8
x25CircuitInProviderInitiatedResets mandatory
The number of Resets received for this circuit with cause code other than DTE initiated.
columnRFC1155-SMICounter.1.3.6.1.2.1.10.5.5.1.9