x25CallParmBcug
RFC1382-MIB ·
.1.3.6.1.2.1.10.5.9.1.15
Object
column
mandatory
r/w
OctetString
The Bilateral Closed User Group to specify. This consists of two octets containing the characters 0 through 9. A string length of three containing the characters DEF for a circuit means use the PLE default (the PLE default parameter may not reference an entry of DEF). A zero length string indicates no facility requested.
Context
- MIB
- RFC1382-MIB
- OID
.1.3.6.1.2.1.10.5.9.1.15- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- x25CallParmEntry
- Table
- x25CallParmTable
- Siblings
- 29
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| x25CallParmIndex mandatory A value that distinguishes this entry from
another entry. Entries in this table are
referenced from other objects which identify
call parameters.
It is impossible … | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.5.9.1.1 |
| x25CallParmFastSelect mandatory Expresses preference for use of fast select
facility. The value of default for a
circuit is the PLE default. A value of
default for the PLE means noFastSelect. A… | column | Enumeration | .1.3.6.1.2.1.10.5.9.1.10 |
| x25CallParmInThruPutClasSize mandatory The incoming throughput class to negotiate.
A value of tcDefault for a circuit means use
the PLE default. A value of tcDefault for
the PLE default means tcNone. A value of
tcNon… | column | Enumeration | .1.3.6.1.2.1.10.5.9.1.11 |
| x25CallParmOutThruPutClasSize mandatory The outgoing throughput class to negotiate.
A value of tcDefault for a circuit means use
the PLE default. A value of tcDefault for
the PLE default means use tcNone. A value
of t… | column | Enumeration | .1.3.6.1.2.1.10.5.9.1.12 |
| x25CallParmCug mandatory The Closed User Group to specify. This
consists of two or four octets containing
the characters 0 through 9. A zero length
string indicates no facility requested. A
string leng… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.13 |
| x25CallParmCugoa mandatory The Closed User Group with Outgoing Access
to specify. This consists of two or four
octets containing the characters 0 through
9. A string length of three containing the
charact… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.14 |
| x25CallParmNui mandatory The Network User Identifier facility. This
is binary value to be included immediately
after the length field. The PLE will supply
the length octet. A zero length string
indicat… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.16 |
| x25CallParmChargingInfo mandatory The charging Information facility. A value
of default for a circuit means use the PLE
default. The value of default for the
default PLE parameters means use noFacility.
The valu… | column | Enumeration | .1.3.6.1.2.1.10.5.9.1.17 |
| x25CallParmRpoa mandatory The RPOA facility. The octet string
contains n * 4 sequences of the characters
0-9 to specify a facility with n entries.
The octet string containing the 3 characters
DEF for a ci… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.18 |
| x25CallParmTrnstDly mandatory The Transit Delay Selection and Indication
value. A value of 65536 indicates no
facility requested. A value of 65537 for a
circuit means use the PLE default (the PLE
… | column | Integer32 | .1.3.6.1.2.1.10.5.9.1.19 |
| x25CallParmStatus mandatory The status of this call parameter entry.
See RFC 1271 for details of usage. | column | RFC1271-MIBEntryStatus | .1.3.6.1.2.1.10.5.9.1.2 |
| x25CallParmCallingExt mandatory The Calling Extension facility. This
contains one of the following:
A sequence of hex digits with the value to
be put in the facility. These digits will be
convert… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.20 |
| x25CallParmCalledExt mandatory The Called Extension facility. This
contains one of the following:
A sequence of hex digits with the value to
be put in the facility. These digits will be
convert… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.21 |
| x25CallParmInMinThuPutCls mandatory The minimum input throughput Class. A
value of 16 for a circuit means use the PLE
default (the PLE parameters entry may not
use this value). A value of 17 indicates no
facility … | column | Integer32 | .1.3.6.1.2.1.10.5.9.1.22 |
| x25CallParmOutMinThuPutCls mandatory The minimum output throughput Class. A
value of 16 for a circuit means use the PLE
default (the PLE parameters entry may not
use this value). A value of 17 indicates no
facility… | column | Integer32 | .1.3.6.1.2.1.10.5.9.1.23 |
| x25CallParmEndTrnsDly mandatory The End-to-End Transit Delay to negotiate.
An octet string of length 2, 4, or 6
contains the facility encoded as specified
in ISO/IEC 8208 section 15.3.2.4. An oct… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.24 |
| x25CallParmPriority mandatory The priority facility to negotiate. The
octet string encoded as specified in ISO/IEC
8208 section 15.3.2.5. A zero length string
indicates no facility requested. The entry
for … | column | OctetString | .1.3.6.1.2.1.10.5.9.1.25 |
| x25CallParmProtection mandatory A string contains the following:
A hex string containing the value for the
protection facility. This will be converted
from hex to the octets actually in the
packet by the agent.… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.26 |
| x25CallParmExptData mandatory The Expedited Data facility to negotiate.
A value of default for a circuit means use
the PLE default value. The entry for the
PLE default parameters may not have the
value defaul… | column | Enumeration | .1.3.6.1.2.1.10.5.9.1.27 |
| x25CallParmUserData mandatory The call user data as placed in the packet.
A zero length string indicates no call user
data. If both the circuit call parameters
and the PLE default have call user data
defined,… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.28 |
| x25CallParmCallingNetworkFacilities mandatory The calling network facilities. The
facilities are encoded here exactly as
encoded in the call packet. These
facilities do not include the marker
facility code.
… | column | OctetString | .1.3.6.1.2.1.10.5.9.1.29 |
| x25CallParmRefCount mandatory The number of references know by a
management station to exist to this set of
call parameters. This is the number of
other objects that have returned a value of,
and will return … | column | RFC1381-MIBPositiveInteger | .1.3.6.1.2.1.10.5.9.1.3 |
| x25CallParmCalledNetworkFacilities mandatory The called network facilities. The
facilities are encoded here exactly as
encoded in the call packet. These
facilities do not include the marker
facility code.
A … | column | OctetString | .1.3.6.1.2.1.10.5.9.1.30 |
| x25CallParmInPacketSize mandatory The maximum receive packet size in octets
for a circuit. A size of zero for a circuit
means use the PLE default size. A size of
zero for the PLE means use a default size of
128. | column | Integer32 | .1.3.6.1.2.1.10.5.9.1.4 |
| x25CallParmOutPacketSize mandatory The maximum transmit packet size in octets
for a circuit. A size of zero for a circuit
means use the PLE default size. A size of
zero for the PLE default means use a default
siz… | column | Integer32 | .1.3.6.1.2.1.10.5.9.1.5 |
| x25CallParmInWindowSize mandatory The receive window size for a circuit. A
size of zero for a circuit means use the PLE
default size. A size of zero for the PLE
default means use 2. | column | Integer32 | .1.3.6.1.2.1.10.5.9.1.6 |
| x25CallParmOutWindowSize mandatory The transmit window size for a circuit. A
size of zero for a circuit means use the PLE
default size. A size of zero for the PLE
default means use 2. | column | Integer32 | .1.3.6.1.2.1.10.5.9.1.7 |
| x25CallParmAcceptReverseCharging mandatory An enumeration defining if the PLE will
accept or refuse charges. A value of
default for a circuit means use the PLE
default value. A value of neverAccept is
only used for the P… | column | Enumeration | .1.3.6.1.2.1.10.5.9.1.8 |
| x25CallParmProposeReverseCharging mandatory An enumeration defining if the PLE should
propose reverse or local charging. The
value of default for a circuit means use the
PLE default. The value of default for the
PLE defau… | column | Enumeration | .1.3.6.1.2.1.10.5.9.1.9 |