snmpFddiSMTConfigPolicy
RFC1285-MIB ·
.1.3.6.1.2.1.10.15.1.2.1.11
Object
column
mandatory
r/w
Integer32
A value that indicates the configuration policies
currently enforced in the node (refer to ANSI SMT
9.4.3.2). The 'configurationHold' policy refers
to the Hold flag, and should not be present only
if the Hold function is supported. The 'CF-Wrap-
AB' policy refers to the CF_Wrap_AB flag.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
configurationHold 0
CF-Wrap-AB 1
Context
- MIB
- RFC1285-MIB
- OID
.1.3.6.1.2.1.10.15.1.2.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- snmpFddiSMTEntry
- Table
- snmpFddiSMTTable
- Siblings
- 18
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-3
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snmpFddiSMTIndex mandatory A unique value for each SMT. Its value ranges
between 1 and the value of snmpFddiSMTNumber. The
value for each SMT must remain constant at least
from one re-initialization of th… | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.1 |
| snmpFddiSMTConfigCapabilities mandatory A value that indicates capabilities that are
present in the node. If 'holdAvailable' is
present, this indicates support of the optional
Hold Function (refer to ANSI SMT 9.4.3.2).… | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.10 |
| snmpFddiSMTConnectionPolicy mandatory A value that indicates the connection policies
enforced at the station. A station sets the
corresponding policy for each of the connection
types that it rejects. The letter desi… | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.12 |
| snmpFddiSMTTNotify mandatory The timer used in the Neighbor Notification
protocol, reported in seconds and ranging from 2
to 30 seconds (refer to ANSI SMT 8.3.1). | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.13 |
| snmpFddiSMTStatusReporting mandatory Indicates whether the node implements the Status
Reporting Protocol. This object is included for
compatibility with products that were designed
prior to the adoption of this stan… | column | Enumeration | .1.3.6.1.2.1.10.15.1.2.1.14 |
| snmpFddiSMTECMState mandatory Indicates the current state of the ECM state
machine (refer to ANSI SMT 9.5.2). | column | Enumeration | .1.3.6.1.2.1.10.15.1.2.1.15 |
| snmpFddiSMTCFState mandatory The attachment configuration for the station or
concentrator (refer to ANSI SMT 9.7.4.3). | column | Enumeration | .1.3.6.1.2.1.10.15.1.2.1.16 |
| snmpFddiSMTHoldState mandatory This value indicates the current state of the
Hold function. The values are determined as
follows: 'holding-prm' is set if the primary ring
is operational and the Recovery Enabl… | column | Enumeration | .1.3.6.1.2.1.10.15.1.2.1.17 |
| snmpFddiSMTRemoteDisconnectFlag mandatory A flag indicating that the station was remotely
disconnected from the network. A station requires
a Connect Action (SM_CM_CONNECT.request (Connect))
to rejoin and clear the flag … | column | Enumeration | .1.3.6.1.2.1.10.15.1.2.1.18 |
| snmpFddiSMTStationAction mandatory This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: R… | column | Enumeration | .1.3.6.1.2.1.10.15.1.2.1.19 |
| snmpFddiSMTStationId mandatory Uniquely identifies an FDDI station. | column | FddiSMTStationIdType | .1.3.6.1.2.1.10.15.1.2.1.2 |
| snmpFddiSMTOpVersionId mandatory The version that this station is using for its
operation (refer to ANSI 7.1.2.2). | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.3 |
| snmpFddiSMTHiVersionId mandatory The highest version of SMT that this station
supports (refer to ANSI 7.1.2.2). | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.4 |
| snmpFddiSMTLoVersionId mandatory The lowest version of SMT that this station
supports (refer to ANSI 7.1.2.2). | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.5 |
| snmpFddiSMTMACCt mandatory The number of MACs in the station or
concentrator. | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.6 |
| snmpFddiSMTNonMasterCt mandatory The number of Non Master PORTs (A, B, or S PORTs)
in the station or concentrator. | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.7 |
| snmpFddiSMTMasterCt mandatory The number of Master PORTs in a node. If the
node is not a concentrator, the value is zero. | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.8 |
| snmpFddiSMTPathsAvailable mandatory A value that indicates the PATH types available
in the station.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this… | column | Integer32 | .1.3.6.1.2.1.10.15.1.2.1.9 |