snmpFddiMACSMTIndex
RFC1285-MIB ·
.1.3.6.1.2.1.10.15.2.2.1.1
Object
column
mandatory
Integer32
The value of the SMT index associated with this MAC.
Context
- MIB
- RFC1285-MIB
- OID
.1.3.6.1.2.1.10.15.2.2.1.1- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- snmpFddiMACEntry
- Table
- snmpFddiMACTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| snmpFddiMACDupAddrTest mandatory The Duplicate Address Test flag, Dup_Addr_Test
(refer to ANSI 8.3.1). | column | Enumeration | .1.3.6.1.2.1.10.15.2.2.1.10 |
| snmpFddiMACPathsRequested mandatory A value that indicates PATH(s) desired for this
MAC.
The value is a sum which represents the individual
PATHs that are desired. This value initially
… | column | Integer32 | .1.3.6.1.2.1.10.15.2.2.1.11 |
| snmpFddiMACDownstreamPORTType mandatory Indicates the PC-Type of the first port that is
downstream of this MAC (the exit port). | column | Enumeration | .1.3.6.1.2.1.10.15.2.2.1.12 |
| snmpFddiMACSMTAddress mandatory The 48 bit individual address of the MAC used for
SMT frames. | column | FddiMACLongAddressType | .1.3.6.1.2.1.10.15.2.2.1.13 |
| snmpFddiMACTReq mandatory The value of T-Req (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2). | column | FddiTime | .1.3.6.1.2.1.10.15.2.2.1.14 |
| snmpFddiMACTNeg mandatory The value of T-Neg (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2). | column | FddiTime | .1.3.6.1.2.1.10.15.2.2.1.15 |
| snmpFddiMACTMax mandatory The value of T-Max (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2). | column | FddiTime | .1.3.6.1.2.1.10.15.2.2.1.16 |
| snmpFddiMACTvxValue mandatory The value of TvxValue (refer to ANSI MAC 2.2.1
and ANSI MAC 7.3.5.2). | column | FddiTime | .1.3.6.1.2.1.10.15.2.2.1.17 |
| snmpFddiMACTMin mandatory The value of T-Min (refer to ANSI MAC 2.2.1 and
ANSI MAC 7.3.5.2). | column | FddiTime | .1.3.6.1.2.1.10.15.2.2.1.18 |
| snmpFddiMACCurrentFrameStatus mandatory A value that indicates the MAC's operational
frame status setting functionality.
The value is a sum. This value initially takes
the value zero, then for each funct… | column | Integer32 | .1.3.6.1.2.1.10.15.2.2.1.19 |
| snmpFddiMACIndex mandatory A unique value for each MAC on the managed
entity. The MAC identified by a particular value
of this index is that identified by the same value
of an ifIndex object instance. Tha… | column | Integer32 | .1.3.6.1.2.1.10.15.2.2.1.2 |
| snmpFddiMACFrameCts mandatory Frame_Ct (refer to ANSI MAC 2.2.1). | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.2.2.1.20 |
| snmpFddiMACErrorCts mandatory Error_Ct (refer to ANSI MAC 2.2.1). | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.2.2.1.21 |
| snmpFddiMACLostCts mandatory Lost_Ct (refer to ANSI MAC 2.2.1). | column | RFC1155-SMICounter | .1.3.6.1.2.1.10.15.2.2.1.22 |
| snmpFddiMACFrameErrorThreshold mandatory A threshold for determining when a MAC Condition
report should be generated. The condition is true
when the ratio, ((delta snmpFddiMACLostCt + delta
snmpFddiMACErrorCt) / (delta … | column | Integer32 | .1.3.6.1.2.1.10.15.2.2.1.23 |
| snmpFddiMACFrameErrorRatio mandatory This attribute is the actual ratio, ((delta
snmpFddiMACLostCt + delta snmpFddiMACErrorCt) /
(delta snmpFddiMACFrameCt + delta
snmpFddiMACLostCt)) x 2**16. | column | Integer32 | .1.3.6.1.2.1.10.15.2.2.1.24 |
| snmpFddiMACRMTState mandatory Indicates the current state of the Ring
Management state machine (refer to ANSI Section
10). | column | Enumeration | .1.3.6.1.2.1.10.15.2.2.1.25 |
| snmpFddiMACDaFlag mandatory The RMT flag Duplicate Address Flag, DA_Flag
(refer to ANSI 10.3.1.2). | column | Enumeration | .1.3.6.1.2.1.10.15.2.2.1.26 |
| snmpFddiMACUnaDaFlag mandatory A flag set when the upstream neighbor reports a
duplicate address condition. Reset when the
condition clears. | column | Enumeration | .1.3.6.1.2.1.10.15.2.2.1.27 |
| snmpFddiMACFrameCondition mandatory Indicates the MAC Condition is active when set.
Cleared when the condition clears and on power
up. | column | Enumeration | .1.3.6.1.2.1.10.15.2.2.1.28 |
| snmpFddiMACChipSet mandatory This object identifies the hardware chip(s) which
is (are) principally responsible for the
implementation of the MAC function. A few OBJECT
IDENTIFIERS are identified elsewhere i… | column | ObjectIdentifier | .1.3.6.1.2.1.10.15.2.2.1.29 |
| snmpFddiMACFrameStatusCapabilities mandatory A value that indicates the MAC's bridge and end-
station capabilities for operating in a bridged
FDDI network.
… | column | Integer32 | .1.3.6.1.2.1.10.15.2.2.1.3 |
| snmpFddiMACAction mandatory This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: … | column | Enumeration | .1.3.6.1.2.1.10.15.2.2.1.30 |
| snmpFddiMACTMaxGreatestLowerBound mandatory The greatest lower bound of T_Max supported for
this MAC. | column | FddiTime | .1.3.6.1.2.1.10.15.2.2.1.4 |
| snmpFddiMACTVXGreatestLowerBound mandatory The greatest lower bound of TVX supported for
this MAC. | column | FddiTime | .1.3.6.1.2.1.10.15.2.2.1.5 |
| snmpFddiMACPathsAvailable mandatory A value that indicates the PATH types available
for this MAC.
The value is a sum. This value initially takes
the value zero, then for each type of PATH that
this M… | column | Integer32 | .1.3.6.1.2.1.10.15.2.2.1.6 |
| snmpFddiMACCurrentPath mandatory Indicates the association of the MAC with a
station PATH. | column | Enumeration | .1.3.6.1.2.1.10.15.2.2.1.7 |
| snmpFddiMACUpstreamNbr mandatory The MAC's upstream neighbor's long individual MAC
address. It may be determined by the Neighbor
Information Frame protocol (refer to ANSI SMT
7.2.1). The value shall be reported… | column | FddiMACLongAddressType | .1.3.6.1.2.1.10.15.2.2.1.8 |
| snmpFddiMACOldUpstreamNbr mandatory The previous value of the MAC's upstream
neighbor's long individual MAC address. It may be
determined by the Neighbor Information Frame
protocol (refer to ANSI SMT 7.2.1). The v… | column | FddiMACLongAddressType | .1.3.6.1.2.1.10.15.2.2.1.9 |