snmpFddiMACIndex

RFC1285-MIB · .1.3.6.1.2.1.10.15.2.2.1.2
MIB view Table view

Object

column mandatory Integer32 
A unique value for each MAC on the managed
entity.  The MAC identified by a particular value
of this index is that identified by the same value
of an ifIndex object instance.  That is, if a MAC
is associated with the interface whose value of
ifIndex in the Internet-Standard MIB is equal to
5, then the value of snmpFddiMACIndex shall also
equal 5.  The value for each MAC must remain
constant at least from one re-initialization of
the entity's network management system to the next
re-initialization.

Context

MIB
RFC1285-MIB
OID
.1.3.6.1.2.1.10.15.2.2.1.2
Type
column
Access
readonly
Status
mandatory
Parent
snmpFddiMACEntry
Table
snmpFddiMACTable
Siblings
29

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-65535

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
snmpFddiMACSMTIndex mandatory
The value of the SMT index associated with this MAC.
columnInteger32.1.3.6.1.2.1.10.15.2.2.1.1
snmpFddiMACDupAddrTest mandatory
The Duplicate Address Test flag, Dup_Addr_Test (refer to ANSI 8.3.1).
columnEnumeration.1.3.6.1.2.1.10.15.2.2.1.10
snmpFddiMACPathsRequested mandatory
A value that indicates PATH(s) desired for this MAC. The value is a sum which represents the individual PATHs that are desired. This value initially …
columnInteger32.1.3.6.1.2.1.10.15.2.2.1.11
snmpFddiMACDownstreamPORTType mandatory
Indicates the PC-Type of the first port that is downstream of this MAC (the exit port).
columnEnumeration.1.3.6.1.2.1.10.15.2.2.1.12
snmpFddiMACSMTAddress mandatory
The 48 bit individual address of the MAC used for SMT frames.
columnFddiMACLongAddressType.1.3.6.1.2.1.10.15.2.2.1.13
snmpFddiMACTReq mandatory
The value of T-Req (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
columnFddiTime.1.3.6.1.2.1.10.15.2.2.1.14
snmpFddiMACTNeg mandatory
The value of T-Neg (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
columnFddiTime.1.3.6.1.2.1.10.15.2.2.1.15
snmpFddiMACTMax mandatory
The value of T-Max (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
columnFddiTime.1.3.6.1.2.1.10.15.2.2.1.16
snmpFddiMACTvxValue mandatory
The value of TvxValue (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
columnFddiTime.1.3.6.1.2.1.10.15.2.2.1.17
snmpFddiMACTMin mandatory
The value of T-Min (refer to ANSI MAC 2.2.1 and ANSI MAC 7.3.5.2).
columnFddiTime.1.3.6.1.2.1.10.15.2.2.1.18
snmpFddiMACCurrentFrameStatus mandatory
A value that indicates the MAC's operational frame status setting functionality. The value is a sum. This value initially takes the value zero, then for each funct…
columnInteger32.1.3.6.1.2.1.10.15.2.2.1.19
snmpFddiMACFrameCts mandatory
Frame_Ct (refer to ANSI MAC 2.2.1).
columnRFC1155-SMICounter.1.3.6.1.2.1.10.15.2.2.1.20
snmpFddiMACErrorCts mandatory
Error_Ct (refer to ANSI MAC 2.2.1).
columnRFC1155-SMICounter.1.3.6.1.2.1.10.15.2.2.1.21
snmpFddiMACLostCts mandatory
Lost_Ct (refer to ANSI MAC 2.2.1).
columnRFC1155-SMICounter.1.3.6.1.2.1.10.15.2.2.1.22
snmpFddiMACFrameErrorThreshold mandatory
A threshold for determining when a MAC Condition report should be generated. The condition is true when the ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta …
columnInteger32.1.3.6.1.2.1.10.15.2.2.1.23
snmpFddiMACFrameErrorRatio mandatory
This attribute is the actual ratio, ((delta snmpFddiMACLostCt + delta snmpFddiMACErrorCt) / (delta snmpFddiMACFrameCt + delta snmpFddiMACLostCt)) x 2**16.
columnInteger32.1.3.6.1.2.1.10.15.2.2.1.24
snmpFddiMACRMTState mandatory
Indicates the current state of the Ring Management state machine (refer to ANSI Section 10).
columnEnumeration.1.3.6.1.2.1.10.15.2.2.1.25
snmpFddiMACDaFlag mandatory
The RMT flag Duplicate Address Flag, DA_Flag (refer to ANSI 10.3.1.2).
columnEnumeration.1.3.6.1.2.1.10.15.2.2.1.26
snmpFddiMACUnaDaFlag mandatory
A flag set when the upstream neighbor reports a duplicate address condition. Reset when the condition clears.
columnEnumeration.1.3.6.1.2.1.10.15.2.2.1.27
snmpFddiMACFrameCondition mandatory
Indicates the MAC Condition is active when set. Cleared when the condition clears and on power up.
columnEnumeration.1.3.6.1.2.1.10.15.2.2.1.28
snmpFddiMACChipSet mandatory
This object identifies the hardware chip(s) which is (are) principally responsible for the implementation of the MAC function. A few OBJECT IDENTIFIERS are identified elsewhere i…
columnObjectIdentifier.1.3.6.1.2.1.10.15.2.2.1.29
snmpFddiMACFrameStatusCapabilities mandatory
A value that indicates the MAC's bridge and end- station capabilities for operating in a bridged FDDI network. …
columnInteger32.1.3.6.1.2.1.10.15.2.2.1.3
snmpFddiMACAction mandatory
This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: …
columnEnumeration.1.3.6.1.2.1.10.15.2.2.1.30
snmpFddiMACTMaxGreatestLowerBound mandatory
The greatest lower bound of T_Max supported for this MAC.
columnFddiTime.1.3.6.1.2.1.10.15.2.2.1.4
snmpFddiMACTVXGreatestLowerBound mandatory
The greatest lower bound of TVX supported for this MAC.
columnFddiTime.1.3.6.1.2.1.10.15.2.2.1.5
snmpFddiMACPathsAvailable mandatory
A value that indicates the PATH types available for this MAC. The value is a sum. This value initially takes the value zero, then for each type of PATH that this M…
columnInteger32.1.3.6.1.2.1.10.15.2.2.1.6
snmpFddiMACCurrentPath mandatory
Indicates the association of the MAC with a station PATH.
columnEnumeration.1.3.6.1.2.1.10.15.2.2.1.7
snmpFddiMACUpstreamNbr mandatory
The MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The value shall be reported…
columnFddiMACLongAddressType.1.3.6.1.2.1.10.15.2.2.1.8
snmpFddiMACOldUpstreamNbr mandatory
The previous value of the MAC's upstream neighbor's long individual MAC address. It may be determined by the Neighbor Information Frame protocol (refer to ANSI SMT 7.2.1). The v…
columnFddiMACLongAddressType.1.3.6.1.2.1.10.15.2.2.1.9