rcTlsTdiEndptUserLabel2

RC-TLS-MIB · .1.3.6.1.4.1.2272.1.40.3.1.37
MIB view Table view

Object

column r/w OctetString 
User provided additional field. Used to give extra management information/data

Context

MIB
RC-TLS-MIB
OID
.1.3.6.1.4.1.2272.1.40.3.1.37
Type
column
Access
readwrite
Status
current
Parent
rcTlsTdiEndptEntry
Table
rcTlsTdiEndptTable
Siblings
42

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-89

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcTlsTdiEndptTdId
Tdi that the end-point is a member of.
columnInteger32.1.3.6.1.4.1.2272.1.40.3.1.1
rcTlsTdiEndptName
Name of Endpoint, By default, it would be EP-<tdi>.<uni>. Example: tdi = 1, uni = 0.0.0.1, rcTlsTdiEndptName would be EP-1.0.0.0.1
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.10
rcTlsTdiEndptMacTblSize
The maximum size of the MAC table. No limit if it's set to 0.
columnInteger32.1.3.6.1.4.1.2272.1.40.3.1.11
rcTlsTdiEndptMacTblWaterMk
The Low Water Mark for MAC table size. Set to 90% of the table size, can be over-written.
columnInteger32.1.3.6.1.4.1.2272.1.40.3.1.12
rcTlsTdiEndptRemoteMacAgeTimer
Remote MAC address ageout timer in seconds.
columnInteger32.1.3.6.1.4.1.2272.1.40.3.1.13
rcTlsTdiEndptLocalMacAgeTimer
Local MAC address ageout timer in seconds.
columnInteger32.1.3.6.1.4.1.2272.1.40.3.1.14
rcTlsTdiEndptOperState
The current operational state of this ENDPOINT.
columnEnumeration.1.3.6.1.4.1.2272.1.40.3.1.15
rcTlsTdiEndptPriOverride
Enable or disable to override the Priority Mapping.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.40.3.1.16
rcTlsTdiEndptBpduTraffic
Bpdu traffic control.
columnEnumeration.1.3.6.1.4.1.2272.1.40.3.1.17
rcTlsTdiEndptAction
EndPt related action- Flush Learned MAC addresses.
columnEnumeration.1.3.6.1.4.1.2272.1.40.3.1.18
rcTlsTdiEndptRowStatus
Uses for controlling the creation and deletion of this row.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.40.3.1.19
rcTlsTdiEndptUniAddr
Uni Address of the end-point.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.40.3.1.2
rcTlsTdiEndptOuterQtag
Outer qtag for QingQ
columnInteger32.1.3.6.1.4.1.2272.1.40.3.1.20
rcTlsTdiEndptNumQtagIds
Used to indicate the number of Qtag IDs that are stored in the rcTlsTdiEndptQtags variable.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.40.3.1.21
rcTlsTdiEndptEgressCosProfileName
Egress COS Profile Table Name.
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.22
rcTlsTdiEndptIngressPolicer
Enable/disable to use Ingress Cos Profile table (rcTlsTdiEndptCosProfileName)
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.23
rcTlsTdiEndptEgressPolicer
Enable/disable to use Egress Cos Profile table (rcTlsTdiEndptEgressCosProfileName)
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.24
rcTlsTdiEndptMepId
Maintenance Endpoint ID, range 1-8191 is valid MepId to be assigned to the Tdi Endpoint. '0' means unassigned Med ID from Tdi Endpoint
columnInteger32.1.3.6.1.4.1.2272.1.40.3.1.25
rcTlsTdiEndptServiceGroup
service group name
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.26
rcTlsTdiEndptCcmOperStatus
The current CCM operational status of this endpoint.
columnEnumeration.1.3.6.1.4.1.2272.1.40.3.1.27
rcTlsTdiEndptIngressMirrorState
disable/enable ingress mirroring on this end-point.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.28
rcTlsTdiEndptEgressMirrorState
disable/enable egress mirroring on this end-point.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.29
rcTlsTdiEndptQtags
A bitfield used to identify which QTAG is includes in this end point. The Most significant Bit field (bit 0) set represents the Qtag 1; The Less significant Bit field (bit 4095…
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.3
rcTlsTdiEndptTrunkGroup obsolete
trunk group name
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.30
rcTlsTdiEndptPolicingOption
Specify whether the policing is pre-encapsulation or post-encapsulation for TDI Endpoints.
columnEnumeration.1.3.6.1.4.1.2272.1.40.3.1.31
rcTlsTdiEndptPriOverrideType
This field indicated whether ToS or DSCP should be used to override P bit when override is enabled.
columnEnumeration.1.3.6.1.4.1.2272.1.40.3.1.32
rcTlsTdiEndptColorBasedRemarking
disable/enable color-based egress mapping for this end-point.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.33
rcTlsTdiEndptDropRedColorPackets
disable/enable dropping of red-colored packets for this end-point if color-based mapping is used.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.40.3.1.34
rcTlsTdiEndptDefaultTdi
disable/enable default Tdi.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.35
rcTlsTdiEndptUserLabel1
User provided field. Used to give extra management information/data
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.36
rcTlsTdiEndptL2ptMacSwapCdp
disable/enable mac swapping on tdi end-point for CDP protocol
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.38
rcTlsTdiEndptL2ptMacSwapVtp
disable/enable mac swapping on tdi end-point for VTP protocol
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.39
rcTlsTdiEndptAdminState
Admin control of the end-point state.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.4
rcTlsTdiEndptL2ptMacSwapStp
disable/enable mac swapping on tdi end-point for STP protocol
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.40.3.1.40
rcTlsTdiEndptDEDecodeScheme
This indicates the DE decode scheme that should be used
columnEnumeration.1.3.6.1.4.1.2272.1.40.3.1.41
rcTlsTdiEndptPcpDecodeMap
This indicates the Drop Eligibility bit for each priority. The first byte represents the drop eligibility for priority 0. Subsequent bytes represent the drop eligibility of t…
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.42
rcTlsTdiEndptL2cpProfile
l2cp profile associated with this end-point. By default NULL L2CP profile will be associated.
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.43
rcTlsTdiEndptConMode
Type of end-point
columnEnumeration.1.3.6.1.4.1.2272.1.40.3.1.5
rcTlsTdiEndptHubUniAddr
Hub Uni address if connection mode (ConnMode) is spoke. If the connection mode is pt2pt then this is the Uni address of the other end-point.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.40.3.1.6
rcTlsTdiEndptMacAddr
Hub OPM Mac address if connectio mode is spoke. if the connection mode is pt2pt theb this is the OPM Mac address of the other end-point.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2272.1.40.3.1.7
rcTlsTdiEndptCosProfileName
COS Profile Table Name.
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.8
rcTlsTdiEndptPriMapping
Maps 802.1p priorities (0-7) to Optical Ethernet Class of Service (COS) values (0-7) for packets across a Uni. The first bytes represent the COS for 802.1p priority 0. Subsequent …
columnOctetString.1.3.6.1.4.1.2272.1.40.3.1.9