rcTlsTdiEndptUniAddr
RC-TLS-MIB ·
.1.3.6.1.4.1.2272.1.40.3.1.2
Object
column
SNMPv2-SMIIpAddress
Uni Address of the end-point.
Context
- MIB
- RC-TLS-MIB
- OID
.1.3.6.1.4.1.2272.1.40.3.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rcTlsTdiEndptEntry
- Table
- rcTlsTdiEndptTable
- Siblings
- 42
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcTlsTdiEndptTdId Tdi that the end-point is a member of. | column | Integer32 | .1.3.6.1.4.1.2272.1.40.3.1.1 |
| rcTlsTdiEndptName Name of Endpoint, By default, it would be EP-<tdi>.<uni>.
Example: tdi = 1, uni = 0.0.0.1, rcTlsTdiEndptName would
be EP-1.0.0.0.1 | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.10 |
| rcTlsTdiEndptMacTblSize The maximum size of the MAC table. No limit if
it's set to 0. | column | Integer32 | .1.3.6.1.4.1.2272.1.40.3.1.11 |
| rcTlsTdiEndptMacTblWaterMk The Low Water Mark for MAC table size. Set to 90%
of the table size, can be over-written. | column | Integer32 | .1.3.6.1.4.1.2272.1.40.3.1.12 |
| rcTlsTdiEndptRemoteMacAgeTimer Remote MAC address ageout timer in seconds. | column | Integer32 | .1.3.6.1.4.1.2272.1.40.3.1.13 |
| rcTlsTdiEndptLocalMacAgeTimer Local MAC address ageout timer in seconds. | column | Integer32 | .1.3.6.1.4.1.2272.1.40.3.1.14 |
| rcTlsTdiEndptOperState The current operational state of this ENDPOINT. | column | Enumeration | .1.3.6.1.4.1.2272.1.40.3.1.15 |
| rcTlsTdiEndptPriOverride Enable or disable to override the Priority Mapping. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.40.3.1.16 |
| rcTlsTdiEndptBpduTraffic Bpdu traffic control. | column | Enumeration | .1.3.6.1.4.1.2272.1.40.3.1.17 |
| rcTlsTdiEndptAction EndPt related action- Flush Learned MAC addresses. | column | Enumeration | .1.3.6.1.4.1.2272.1.40.3.1.18 |
| rcTlsTdiEndptRowStatus Uses for controlling the creation and
deletion of this row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.40.3.1.19 |
| rcTlsTdiEndptOuterQtag Outer qtag for QingQ | column | Integer32 | .1.3.6.1.4.1.2272.1.40.3.1.20 |
| rcTlsTdiEndptNumQtagIds Used to indicate the number of Qtag IDs that
are stored in the rcTlsTdiEndptQtags variable. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.40.3.1.21 |
| rcTlsTdiEndptEgressCosProfileName Egress COS Profile Table Name. | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.22 |
| rcTlsTdiEndptIngressPolicer Enable/disable to use Ingress Cos Profile table
(rcTlsTdiEndptCosProfileName) | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.23 |
| rcTlsTdiEndptEgressPolicer Enable/disable to use Egress Cos Profile table
(rcTlsTdiEndptEgressCosProfileName) | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.24 |
| rcTlsTdiEndptMepId Maintenance Endpoint ID, range 1-8191 is valid MepId
to be assigned to the Tdi Endpoint. '0' means
unassigned Med ID from Tdi Endpoint | column | Integer32 | .1.3.6.1.4.1.2272.1.40.3.1.25 |
| rcTlsTdiEndptServiceGroup service group name | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.26 |
| rcTlsTdiEndptCcmOperStatus The current CCM operational status of this endpoint. | column | Enumeration | .1.3.6.1.4.1.2272.1.40.3.1.27 |
| rcTlsTdiEndptIngressMirrorState disable/enable ingress mirroring on this end-point. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.28 |
| rcTlsTdiEndptEgressMirrorState disable/enable egress mirroring on this end-point. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.29 |
| rcTlsTdiEndptQtags A bitfield used to identify which QTAG is
includes in this end point.
The Most significant Bit field (bit 0) set represents
the Qtag 1; The Less significant Bit field (bit 4095… | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.3 |
| rcTlsTdiEndptTrunkGroup obsolete trunk group name | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.30 |
| rcTlsTdiEndptPolicingOption Specify whether the policing is
pre-encapsulation or post-encapsulation
for TDI Endpoints. | column | Enumeration | .1.3.6.1.4.1.2272.1.40.3.1.31 |
| rcTlsTdiEndptPriOverrideType This field indicated whether ToS or DSCP should be
used to override P bit when override is enabled. | column | Enumeration | .1.3.6.1.4.1.2272.1.40.3.1.32 |
| rcTlsTdiEndptColorBasedRemarking disable/enable color-based egress mapping for this
end-point. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.33 |
| rcTlsTdiEndptDropRedColorPackets disable/enable dropping of red-colored packets for
this end-point if color-based mapping is used. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.40.3.1.34 |
| rcTlsTdiEndptDefaultTdi disable/enable default Tdi. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.35 |
| rcTlsTdiEndptUserLabel1 User provided field. Used to give extra management information/data | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.36 |
| rcTlsTdiEndptUserLabel2 User provided additional field. Used to give extra management information/data | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.37 |
| rcTlsTdiEndptL2ptMacSwapCdp disable/enable mac swapping on tdi end-point for CDP protocol | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.38 |
| rcTlsTdiEndptL2ptMacSwapVtp disable/enable mac swapping on tdi end-point for VTP protocol | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.39 |
| rcTlsTdiEndptAdminState Admin control of the end-point state. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.4 |
| rcTlsTdiEndptL2ptMacSwapStp disable/enable mac swapping on tdi end-point for STP protocol | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.40.3.1.40 |
| rcTlsTdiEndptDEDecodeScheme This indicates the DE decode
scheme that should be used | column | Enumeration | .1.3.6.1.4.1.2272.1.40.3.1.41 |
| rcTlsTdiEndptPcpDecodeMap This indicates the Drop Eligibility
bit for each priority. The first byte
represents the drop eligibility for
priority 0. Subsequent bytes represent
the drop eligibility of t… | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.42 |
| rcTlsTdiEndptL2cpProfile l2cp profile associated with this end-point.
By default NULL L2CP profile will be associated. | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.43 |
| rcTlsTdiEndptConMode Type of end-point | column | Enumeration | .1.3.6.1.4.1.2272.1.40.3.1.5 |
| rcTlsTdiEndptHubUniAddr Hub Uni address if connection mode (ConnMode) is
spoke. If the connection mode is pt2pt then this
is the Uni address of the other end-point. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.40.3.1.6 |
| rcTlsTdiEndptMacAddr Hub OPM Mac address if connectio mode is spoke.
if the connection mode is pt2pt theb this is
the OPM Mac address of the other end-point. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.40.3.1.7 |
| rcTlsTdiEndptCosProfileName COS Profile Table Name. | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.8 |
| rcTlsTdiEndptPriMapping Maps 802.1p priorities (0-7) to Optical Ethernet
Class of Service (COS) values (0-7) for packets
across a Uni. The first bytes represent the COS
for 802.1p priority 0. Subsequent … | column | OctetString | .1.3.6.1.4.1.2272.1.40.3.1.9 |