rcEapPortCloneSettingsDestPortList
RC-RADIUS-MIB ·
.1.3.6.1.4.1.2272.1.57.2.1.19
Object
This object represents the destination port list on which the EAP port configuration will be copied. The default value will be returned by all read opperations. The write operation must contain both rcEapPortCloneSettingsAction and rcEapPortCloneSettingsDestPortList.
Context
- MIB
- RC-RADIUS-MIB
- OID
.1.3.6.1.4.1.2272.1.57.2.1.19- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcEapPortEntry
- Table
- rcEapPortTable
- Siblings
- 27
Syntax
Q-BRIDGE-MIBPortList
- Source
- Q-BRIDGE-MIBPortList
- Base type
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcEapPortIndex An index value that uniquely identifies a port.
This value is similar to ifIndex in MIB2. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.57.2.1.1 |
| rcEapPortStatus This object allows enabling EAPoL on the port.
If status is forceUnauthorized(2), then EAPoL is
enabled on the port but it doesn't allow any traffic
on the port.
If status is auto… | column | Enumeration | .1.3.6.1.4.1.2272.1.57.2.1.10 |
| rcEapPortEapMaxClients This object specifies the maximum number of EAP-authentication
MAC addresses allowed on this port. A value of 0 indicates that
802.1X authentication is disabled on this port. | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.11 |
| rcEapPortMultiHostSingleAuthEnabled This object controls whether non-EAP clients (MAC addresses) may
be automatically authenticated on the port after one client
has been authenticated (known as MHSA). | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.12 |
| rcEapPortAllowDhcpPhones This object indicates whether IP phones will be allowed access
based on DHCP signature. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.13 |
| rcEapPortEapPacketMode This object indicates whether to use unicast or multicast packets
for Eap-ReqId packets. Normally, multicast packets are used. | column | Enumeration | .1.3.6.1.4.1.2272.1.57.2.1.14 |
| rcEapPortProcessRadiusCOAPackets This object indicates whether to process any RADIUS requests-server
packets that are received on this port. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.15 |
| rcEapPortFailOpenVlanId This object specifies the ID of the Fail-Open VLAN for this port.
Authenticated devices are moved into the configured Fail Open VLAN
when the switch declares the RADIUS servers un… | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.16 |
| rcEapPortFailOpenVlanUBP This object represents the UBP filter name of the fail-open policy | column | OctetString | .1.3.6.1.4.1.2272.1.57.2.1.17 |
| rcEapPortCloneSettingsAction This object starts the action of copying eap settings from current
ifIndex to the list of ports specified in rcEapPortCloneSettingsDestPortList.
The default value will be returned… | column | Enumeration | .1.3.6.1.4.1.2272.1.57.2.1.18 |
| rcEapPortGuestVlanEnable When this variable is set to TRUE, EAPoL Guest Vlan
feature will be enabled on the port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.2 |
| rcEapPortGuestIsid A value representing the I-SID to be used as a Guest
I-SID. Access for untagged unauthenticated hosts connected to this port
is provided through this I-SID. A value of 0 indicates… | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.20 |
| rcEapPortFailOpenIsid This object specifies the Fail Open I-SID for this port.
Untagged unauthenticated devices are assigned to this I-SID
when the RADIUS Servers are unreachable.
A value of 0 indicate… | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.21 |
| rcEapPortFlexUniStatus This object specifies if flex-uni is enabled on this port.
If enabled, EAP will operate in flex-uni mode.
If disabled, EAP will operate in legacy VLAN mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.22 |
| rcEapPortAdminTrafficControl This option controls the configured traffic blocking
directions for a port when there are no authenticated
clients for that port. Filtering only ingress packets will
permit egress… | column | Enumeration | .1.3.6.1.4.1.2272.1.57.2.1.23 |
| rcEapPortOperTrafficControl This option specifies the operational traffic blocking
directions for a port when there are no authenticated
clients for that port. Filtering only ingress packets will
permit egre… | column | Enumeration | .1.3.6.1.4.1.2272.1.57.2.1.24 |
| rcEapPortLldpAuthEnabled This object specifies if lldp-authentication of IP phones is allowed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.25 |
| rcEapPortOrigin Describes how EAPOL was configured on port: manual (CLI/SNMP) or
ZTF(Auto-Sense). | column | Enumeration | .1.3.6.1.4.1.2272.1.57.2.1.26 |
| rcEapPortDynamicMHSAEnabled This object specifies if the port was dynamically added in the MHSA mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.27 |
| rcEapPortTrafficControlOrigin Indicates how the traffic control field was enabled.
Supported values:
config - traffic control was enabled by user.
radius - traffic control enabled by EAP via Radius response. | column | Bits | .1.3.6.1.4.1.2272.1.57.2.1.28 |
| rcEapPortGuestVlanId A value representing the VLAN to be used as a Guest
VLAN. Access for unautheticated host/s connected to this port
is provided through this VLAN. A value of 0 indicates
that guest … | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.3 |
| rcEapPortMultiHostEnable When this variable is set to TRUE, the system is enabled to
have multiple 802.1X supplicants authenticated from the same
port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.4 |
| rcEapPortMultiHostMaxClients Integer value representing the maximum number of supplicants
that are allowed to get authenticated on the port. This is
applicable in MHMV mode. | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.5 |
| rcEapPortAllowNonEapHost When this variable is set to TRUE, the system is enabled to
allow hosts that do not participate in 802.1X authentication
to get network access. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.6 |
| rcEapPortNonEapMaxClients Integer value representing the maximum number of non-802.1X
hosts that are allowed to connect to the port. A value of 0
indicates that non-802.1X authentication is disabled
on thi… | column | Integer32 | .1.3.6.1.4.1.2272.1.57.2.1.7 |
| rcEapPortRadAuthNonEapClients When this variable is set to TRUE, the system is enabled to
allow Non-Eap hosts on the port to get network access through radius
based Mac authorization. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.8 |
| rcEapPortShutDownOnIntrusion When this variable is set to TRUE, the port is
shutdown on encountering [max + 1st] non-eap client
on the port | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.57.2.1.9 |