rcPrFilterAceRemarkDot1Priority
RC-POWER-RANGER-MIB ·
.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6
Object
column
r/w
Enumeration
Dot1 Priority as described by Layer 2 standards, 802.1Q, 802.1P.
Context
- MIB
- RC-POWER-RANGER-MIB
- OID
.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcPrFilterAceEntry
- Table
- rcPrFilterAceTable
- Siblings
- 35
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | zero |
1 | one |
2 | two |
3 | three |
4 | four |
5 | five |
6 | six |
7 | seven |
8 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcPrFilterAceAclId An index to the AceEntry, a unique
identifier for Acl entry in the range of Table
Size. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1 |
| rcPrFilterAceAdminState Value indicating whether the Ace is enabled.
An Ace can only be modified if it is disabled. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10 |
| rcPrFilterAceOperState The current operational state of the Ace. | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11 |
| rcPrFilterAceEgressQueue Indicates the Egress Queue for 10/100 card. If only 1
value is specified then this value is applied to
Queue1g and Queue10g as well. If 2 values are
specified then the first val… | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.12 |
| rcPrFilterAceEgressQueue1g Indicates the Egress Queue for 1gig card. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.13 |
| rcPrFilterAceEgressQueue10g Indicates the Egress Queue for 10gig card. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.14 |
| rcPrFilterAceEgressQueueNNSC Ace Egress Queue NNSC. | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.15 |
| rcPrFilterAceFlags Bitmask for the flags:
none(0): Default value for the flags.
stopOnMatch(1): set desired behavior for flag
whether to stop or continue in case an… | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.16 |
| rcPrFilterAceStopOnMatch Value indicating whether stop-on-match option on the
Ace is enabled. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.17 |
| rcPrFilterAceMltIndex If this action is specified, it will
basically override the mlt-index picked
by the mlt algorithm, when a packet is
being sent out on MLT ports. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18 |
| rcPrFilterAceRowStatus Create/delete operations for this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19 |
| rcPrFilterAceId AceId uniquely identifies one Ace entry. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2 |
| rcPrFilterAceIpfixState Value indicating whether ipfix option on the
Ace is enabled. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20 |
| rcPrFilterAceRedirectNextHopIpv6 Redirect matching IPv6 traffic to the next hop. | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21 |
| rcPrFilterAceDstPortList Destination Port List for mirroring the packets. | column | RAPID-CITYPortSet | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22 |
| rcPrFilterAceDstVlanId Destination Vlan to mirror the packets. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23 |
| rcPrFilterAceDstMltId Destination Mlt to mirror the packets. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24 |
| rcPrFilterAceInternalQos Internal QOS Level assigned to the packet flow | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25 |
| rcPrFilterAceCount Value indicating whether Count option on the
Ace is enabled. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26 |
| rcPrFilterAceLog Value indicating whether log option on the
Ace is enabled. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27 |
| rcPrFilterAceCopytoPcap Value indicating whether copy to pcap option
on the Ace is enabled. | column | RAPID-CITYEnableValue | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28 |
| rcPrFilterAceDstIp Destination IP address to mirror the packets. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29 |
| rcPrFilterAceName A descriptive name chosen by the administrator.
System automatically assigns a name if the user
has not assigned one. | column | OctetString | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3 |
| rcPrFilterAceDstIpTtl Ttl value for the mirrored packet when mirror
destination is IP. If other than default,
the encapsulated packet will have the given ttl. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30 |
| rcPrFilterAceDstIpDscp Dscp value for the mirrored packet when mirror
destination is IP. The 6-bit DSCP field from the
ToS byte in Ipv4 header encodes the PHB information
per DiffServ standards (Refer … | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31 |
| rcPrFilterAceMonitoringIsidOffset Used to configure the monitoring ISID offset value.
The offset id value is mapped to actual monitor I-SID value
in which packets are mirrored to. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.32 |
| rcPrFilterAceMonitoringIsid Actual monitor I-SID value in which packets are mirrored to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.33 |
| rcPrFilterAceMirroringQos Used to define the Quality of Service (QoS) profiles for the mirrored
packet into monitoring ISID. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.34 |
| rcPrFilterAceRemoveTag Used to remove inner vlan tag of the
mirrored packet into the SPB network.
By default, it is set to false and
vlan tag will not be removed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.35 |
| rcPrFilterAceRedirectNextHopVrfName VRF Name associated with IP/IPv6 redirect next hop. | column | OctetString | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.36 |
| rcPrFilterAceMode Operating Mode associated with the Ace is effective
on the packets matching this Ace. | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4 |
| rcPrFilterAceRemarkDscp The 6-bit DSCP field from the ToS byte in Ipv4 header
encodes the PHB information per DiffServ standards
(Refer to DiffServ RFCs 2474). Set the Dscp to PHB
(like EF) or PHB-class(… | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5 |
| rcPrFilterAceRedirectNextHop Redirect matching IP traffic to the next hop. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7 |
| rcPrFilterAceRedirectUnreach Set the desired behavior for redirected traffic in
case the specified next-hop is not reachable. | column | Enumeration | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8 |
| rcPrFilterAcePolice Policing profile Identifier. Set the desired policing
profile identifier. Set the value to 0 when policing
is not desired. | column | Integer32 | .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9 |