rcPrFilterAceDstVlanId

RC-POWER-RANGER-MIB · .1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23
MIB view Table view

Object

column r/w Integer32 
Destination Vlan to mirror the packets.

Context

MIB
RC-POWER-RANGER-MIB
OID
.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.23
Type
column
Access
readwrite
Status
current
Parent
rcPrFilterAceEntry
Table
rcPrFilterAceTable
Siblings
35

Syntax

Integer32

Values & Constraints

Object Constraints
range: 0-4094

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcPrFilterAceAclId
An index to the AceEntry, a unique identifier for Acl entry in the range of Table Size.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.1
rcPrFilterAceAdminState
Value indicating whether the Ace is enabled. An Ace can only be modified if it is disabled.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.10
rcPrFilterAceOperState
The current operational state of the Ace.
columnEnumeration.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.11
rcPrFilterAceEgressQueue
Indicates the Egress Queue for 10/100 card. If only 1 value is specified then this value is applied to Queue1g and Queue10g as well. If 2 values are specified then the first val…
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.12
rcPrFilterAceEgressQueue1g
Indicates the Egress Queue for 1gig card.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.13
rcPrFilterAceEgressQueue10g
Indicates the Egress Queue for 10gig card.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.14
rcPrFilterAceEgressQueueNNSC
Ace Egress Queue NNSC.
columnEnumeration.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.15
rcPrFilterAceFlags
Bitmask for the flags: none(0): Default value for the flags. stopOnMatch(1): set desired behavior for flag whether to stop or continue in case an…
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.16
rcPrFilterAceStopOnMatch
Value indicating whether stop-on-match option on the Ace is enabled.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.17
rcPrFilterAceMltIndex
If this action is specified, it will basically override the mlt-index picked by the mlt algorithm, when a packet is being sent out on MLT ports.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.18
rcPrFilterAceRowStatus
Create/delete operations for this entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.19
rcPrFilterAceId
AceId uniquely identifies one Ace entry.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.2
rcPrFilterAceIpfixState
Value indicating whether ipfix option on the Ace is enabled.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.20
rcPrFilterAceRedirectNextHopIpv6
Redirect matching IPv6 traffic to the next hop.
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.21
rcPrFilterAceDstPortList
Destination Port List for mirroring the packets.
columnRAPID-CITYPortSet.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.22
rcPrFilterAceDstMltId
Destination Mlt to mirror the packets.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.24
rcPrFilterAceInternalQos
Internal QOS Level assigned to the packet flow
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.25
rcPrFilterAceCount
Value indicating whether Count option on the Ace is enabled.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.26
rcPrFilterAceLog
Value indicating whether log option on the Ace is enabled.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.27
rcPrFilterAceCopytoPcap
Value indicating whether copy to pcap option on the Ace is enabled.
columnRAPID-CITYEnableValue.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.28
rcPrFilterAceDstIp
Destination IP address to mirror the packets.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.29
rcPrFilterAceName
A descriptive name chosen by the administrator. System automatically assigns a name if the user has not assigned one.
columnOctetString.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.3
rcPrFilterAceDstIpTtl
Ttl value for the mirrored packet when mirror destination is IP. If other than default, the encapsulated packet will have the given ttl.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.30
rcPrFilterAceDstIpDscp
Dscp value for the mirrored packet when mirror destination is IP. The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer …
columnEnumeration.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.31
rcPrFilterAceMonitoringIsidOffset
Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.32
rcPrFilterAceMonitoringIsid
Actual monitor I-SID value in which packets are mirrored to.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.33
rcPrFilterAceMirroringQos
Used to define the Quality of Service (QoS) profiles for the mirrored packet into monitoring ISID.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.34
rcPrFilterAceRemoveTag
Used to remove inner vlan tag of the mirrored packet into the SPB network. By default, it is set to false and vlan tag will not be removed.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.35
rcPrFilterAceRedirectNextHopVrfName
VRF Name associated with IP/IPv6 redirect next hop.
columnOctetString.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.36
rcPrFilterAceMode
Operating Mode associated with the Ace is effective on the packets matching this Ace.
columnEnumeration.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.4
rcPrFilterAceRemarkDscp
The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(…
columnEnumeration.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.5
rcPrFilterAceRemarkDot1Priority
Dot1 Priority as described by Layer 2 standards, 802.1Q, 802.1P.
columnEnumeration.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.6
rcPrFilterAceRedirectNextHop
Redirect matching IP traffic to the next hop.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.7
rcPrFilterAceRedirectUnreach
Set the desired behavior for redirected traffic in case the specified next-hop is not reachable.
columnEnumeration.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.8
rcPrFilterAcePolice
Policing profile Identifier. Set the desired policing profile identifier. Set the value to 0 when policing is not desired.
columnInteger32.1.3.6.1.4.1.2272.1.202.1.1.2.4.1.1.9