rcIpv6NetToPhysicalNetAddress
RC-IPV6-MIB ·
.1.3.6.1.4.1.2272.1.62.1.1.7.1.2
Object
column
IPV6-TCIpv6Address
The IP Address corresponding to the media-dependent
`physical' address. The address type of this object is
specified in rcIpv6NetToPhysicalAddressType.
Implementors need to be aware that if the size of
rcIpv6NetToPhysicalNetAddress exceeds 115 octets then OIDS of
instances of columns in this row will have more than 128
sub-identifiers and cannot be accessed using SNMPv1, SNMPv2c
or SNMPv3.
Context
- MIB
- RC-IPV6-MIB
- OID
.1.3.6.1.4.1.2272.1.62.1.1.7.1.2- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- rcIpv6NetToPhysicalEntry
- Table
- rcIpv6NetToPhysicalTable
- Siblings
- 9
Values & Constraints
Type Constraints
range: 16
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6NetToPhysicalIfIndex The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
i… | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.2272.1.62.1.1.7.1.1 |
| rcIpv6NetToPhysicalBMac If the rcIpv6NetToPhysicalEntry is learned from a
SPBM network, instead of using port to track where the
rcIpv6NetToPhysicalNetAddress come from, the backbone
MAC address is used … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.62.1.1.7.1.10 |
| rcIpv6NetToPhysicalCvid Used to identify customer vid of the switched uni port
of this entry is associated with. 4095 is not used. 4096
is reserved for untagged case. | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.7.1.11 |
| rcIpv6NetToPhysicalPhysAddress The media-dependent `physical' address.
As the entries in this table are typically not persistent
when this object is written the entity SHOULD NOT save the
change … | column | OctetString | .1.3.6.1.4.1.2272.1.62.1.1.7.1.3 |
| rcIpv6NetToPhysicalInterface The field represents either a physical port id or the MLT
port id. This entry is associated either with
a port or with a MLT in a VLAN/Brouter port. If the value is
0 then the in… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.7.1.4 |
| rcIpv6NetToPhysicalLastUpdated The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then thi… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2272.1.62.1.1.7.1.5 |
| rcIpv6NetToPhysicalType The type of mapping.
The 'dynamic(2)' type indicates that the IP address to
physical addresses mapping has been dynamically resolved
using e.g. IPv4 ARP or the IPv6… | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.7.1.6 |
| rcIpv6NetToPhysicalState The Neighbor Unreachability Detection [4] state for the
interface when the address mapping in this entry is used.
If Neighbor Unreachability Detection is not in use (eg. for
IPv4)… | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.7.1.8 |
| rcIpv6NetToPhysicalRowStatus The status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.62.1.1.7.1.9 |