rc2kBootConfigLinerateDirectedBroadcast
RC-2K-MIB ·
.1.3.6.1.4.1.2272.1.100.5.1.56
Object
Flag to Enable or Disable Linerate Directed Broadcast. With this flag set, IP directed broadcast will operate at linerate. Without this flag, all IP directed broadcast is handled in legacy mode by the CP and is limited to a few hundred pps. When booted with the flag set, faceplate port 1/48 is removed from service and recommissioned as a loopback port to which all directed broadcast traffic is sent. The traffic can then reenter the pipeline and flooded over the VLAN at linrate.
Context
- MIB
- RC-2K-MIB
- OID
.1.3.6.1.4.1.2272.1.100.5.1.56- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rc2kBootConfigEntry
- Table
- rc2kBootConfigTable
- Siblings
- 60
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rc2kBootConfigSlot slot number, tattoo use 3 as cpu slot,
4 & 7-10 are not valid cpu slot number,
VSP uses slots 1 and 2 for cpu slot | column | Integer32 | .1.3.6.1.4.1.2272.1.100.5.1.1 |
| rc2kBootConfigTertiaryConfigSource config source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.10 |
| rc2kBootConfigEnableAutoBoot auto boot mode | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.11 |
| rc2kBootConfigEnableFactoryDefaults use factory default | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.12 |
| rc2kBootConfigEnableDebugMode debug mode | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.13 |
| rc2kBootConfigEnableHwWatchDogTimer hw watch dog timer | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.14 |
| rc2kBootConfigEnableRebootOnError reboot on error | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.15 |
| rc2kBootConfigEnableTelnetServer telnet server | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.16 |
| rc2kBootConfigEnableRloginServer rlogin server | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.17 |
| rc2kBootConfigEnableFtpServer ftp server | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.18 |
| rc2kBootConfigEnableTftpServer tftp server | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.19 |
| rc2kBootConfigLastBootConfigSource boot config source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.2 |
| rc2kBootConfigSwVersion current sw version | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.100.5.1.20 |
| rc2kBootConfigMulticastConfigProfile multicast config | column | Integer32 | .1.3.6.1.4.1.2272.1.100.5.1.21 |
| rc2kBootConfigEnableSshServer ssh server | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.22 |
| rc2kBootConfigEnableAltLed Boot flag for enableing Alternate LED | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.23 |
| rc2kBootConfigPrimaryBackupConfigSource primary backup config source (save config) | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.24 |
| rc2kBootConfigSecondaryBackupConfigSource secondary backup config source (save config) | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.25 |
| rc2kBootConfigTertiaryBackupConfigSource tertiary backup config source (save config) | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.26 |
| rc2kBootConfigEnable8616ReAutoneg Enable re-autoneg for 8616SX Cards (Intel GMAC fix) | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.27 |
| rc2kBootConfigMezzImageSource Mezz image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.28 |
| rc2kBootConfigEnableMezz Enable/disable Mezz Flag | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.29 |
| rc2kBootConfigLastRuntimeImageSource runtime image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.3 |
| rc2kBootConfigPrimaryLicenseSource Primary choice for the license source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.30 |
| rc2kBootConfigSecondaryLicenseSource Secondary choice for the license source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.31 |
| rc2kBootConfigTertiaryLicenseSource Tertiary choice for the license source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.32 |
| rc2kBootConfigUnknownDstMacDiscard obsolete Enable/disable to discard the unknown destination
mac address. A device reboot is required for the
change to take effect. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.33 |
| rc2kBootConfigUnknownDstMacDiscardOperStatus obsolete Indicates the device operational status of unknown
destination mac discard. | column | Enumeration | .1.3.6.1.4.1.2272.1.100.5.1.34 |
| rc2kBootConfigEnableAutoAssignIp Enable/disable auto-assign-ip feature | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.35 |
| rc2kBootConfigUpgradeBootImageSource Upgrade boot image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.36 |
| rc2kBootConfigUpgradeRuntimeImageSource Upgrade runtime image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.37 |
| rc2kBootConfigUpgradeMezzImageSource Upgrade mezz image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.38 |
| rc2kBootConfigUpgradeConfigSource Upgrade config source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.39 |
| rc2kBootConfigLastRuntimeConfigSource runtime config source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.4 |
| rc2kBootConfigUpgradeRModImageSource upgrade RMod image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.40 |
| rc2kBootConfigUpgradeRCModImageSource upgrade RCMod image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.41 |
| rc2kBootConfigUpgradeESMImageSource upgrade ESM image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.42 |
| rc2kBootConfigFallBackBootImageSource upgrade fall-back boot monitor source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.43 |
| rc2kBootConfigEnableCfPcCompat Enable/disable CF PC compatibility | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.44 |
| rc2kBootConfigLinecardCompatibilityMode This indicates the compatibility mode of the IO cards
on the Chassis. In gen1 mode, both the generation 1
cards and generation 2 (ROF) cards will be supported
and the max number… | column | Enumeration | .1.3.6.1.4.1.2272.1.100.5.1.45 |
| rc2kBootConfigEnableSpbmConfigMode Enables spbm-config-mode boot flag. When this flag
is true, SPBM configurations are allowed and PIM
configurations are disabled and not allowed.
When this flag is false, PIM confi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.46 |
| rc2kBootConfigEnableIpv6Mode Enable/disable Ipv6-Mode Flag.This flag is
used only for VSP8200 and VSP4k because of the
limitation in Trident2 where Ipv6 route with
prefix-length >64 cannot be stored in the L3… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.47 |
| rc2kBootConfigEnableEnhancedsecureMode Enable/disable Federal Mode Flag | column | Enumeration | .1.3.6.1.4.1.2272.1.100.5.1.48 |
| rc2kBootConfigEnableUrpfMode From VOSS5.x onwards, unicast reverse path
forwarding will be supported on small system
platforms only if this flag is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.49 |
| rc2kBootConfigPrimaryImageSource image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.5 |
| rc2kBootConfigEnableFlowControlMode Enable/disable Flow Control Mode Flag. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.50 |
| rc2kBootConfigAdvancedFeatureBwReservation Allow to enable the port forwarding bandwidth working
as loopback ports to support advanced feature mode,
or disable the reservation for full port mode. Enable can be
in levels of… | column | Enumeration | .1.3.6.1.4.1.2272.1.100.5.1.51 |
| rc2kBootConfigEnableVxlanGwFullInterworkingMode Enables vxlan gateway full interworking mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.52 |
| rc2kBootConfigNniMstp Flag to decide whether configuration of mstp and other
vlans on the NNI is allowed. Default is not allowed. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.53 |
| rc2kBootConfigEnableDvrLeafMode DVR can be configured as controller or leaf. IP
related configuration and show commands are not
allowed on leaf. dvr-leaf-mode flag has to be
enabled first before user can config… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.54 |
| rc2kBootConfigEnablevrfScaling Flag to Enable or Disable vrf scaling. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.55 |
| rc2kBootConfigVcMode Flag to Enable or Disable Virtual Chassis mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.57 |
| rc2kBootConfigEnableIpv6EgressFilterMode Flag to enable or disable the IPV6 egress filter | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.58 |
| rc2kBootConfigEnableSyslogRfc5424Format Flag to enable or disable the syslog output format.
Enable will align syslog format with RFC 5424. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.100.5.1.59 |
| rc2kBootConfigPrimaryConfigSource config source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.6 |
| rc2kBootConfigEnableFactoryDefaultsMode Set Factory default boot wiht option. This object is used to
deprecate and obsolete the rc2kBootConfigEnableFactoryDefaults
disable(1): System boot up with no default configurati… | column | Enumeration | .1.3.6.1.4.1.2272.1.100.5.1.60 |
| rc2kBootConfigInsightPortConnectType This object indicates the desired insight port connect type
of the system.
The valid values are:
vtd(1)
ovs-sriov(2)
Note that changing the insight port connect ty… | column | Enumeration | .1.3.6.1.4.1.2272.1.100.5.1.61 |
| rc2kBootConfigSecondaryImageSource image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.7 |
| rc2kBootConfigSecondaryConfigSource config source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.8 |
| rc2kBootConfigTertiaryImageSource image source | column | OctetString | .1.3.6.1.4.1.2272.1.100.5.1.9 |