rbnL2tpPCfgVendor
RBN-L2TP-MIB ·
.1.3.6.1.4.1.2352.2.28.1.1.1.3
Object
column
OctetString
This object identifies the vendor of L2TP stack running on the remote peer. The length of the string will be zero if no vendor name can be obtained from the peer.
Context
- MIB
- RBN-L2TP-MIB
- OID
.1.3.6.1.4.1.2352.2.28.1.1.1.3- Type
- column
- Access
- readonly
- Status
- current
- Parent
- rbnL2tpPeerCfgEntry
- Table
- rbnL2tpPeerCfgTable
- Siblings
- 34
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-60
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rbnL2tpMibPeerName This object identifies the name of the Peer on the local
system. This peer is the name of an identifier for a
tunnel configuration and each tunnel that is assigned to
this peer… | column | OctetString | .1.3.6.1.4.1.2352.2.28.1.1.1.1 |
| rbnL2tpPCfgLocalIPAddType This object identifies the address type contained in
rbnL2tpPCfgLocalIPAdd. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2352.2.28.1.1.1.10 |
| rbnL2tpPCfgLocalIPAdd This object indicates the local IP address
for this tunnel (utilized only with UDP). | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2352.2.28.1.1.1.11 |
| rbnL2tpPCfgMode This object indicates whether the peer
is operating as an LNS, a LAC, or both. | column | LacLnsType | .1.3.6.1.4.1.2352.2.28.1.1.1.12 |
| rbnL2tpPCfgMaxTunnels This object indicates the maximum number
of tunnels that may be configured on this peer. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2352.2.28.1.1.1.14 |
| rbnL2tpPCfgMaxSesPerTun This object indicates the maximum number of
sessions that may be allocated to one tunnel. | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2352.2.28.1.1.1.15 |
| rbnL2tpPCfgCtlRetranCnt This object indicates a count of the number of
times that a control packet was retransmitted. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2352.2.28.1.1.1.16 |
| rbnL2tpPCfgCtlRetranTO This object indicates the control retransmit
timeout in seconds. | column | seconds Unsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.17 |
| rbnL2tpPCfgSessAuth This object indicates the session authentication
type. | column | AuthType | .1.3.6.1.4.1.2352.2.28.1.1.1.18 |
| rbnL2tpPCfgCtlWin This object indicates the control window size. | column | Unsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.19 |
| rbnL2tpPCfgMedia This object identifies the transport media utilized
between communicating peers. A media length of 0 means that
no transport media type was set. | column | OctetString | .1.3.6.1.4.1.2352.2.28.1.1.1.2 |
| rbnL2tpPCfgDNIS This object indicates whether the critera used
for a tunnel switch is Dialed Number Identification
String first (a value of (1)), DNIS only (a value of (2)) or
the no preference… | column | DNISType | .1.3.6.1.4.1.2352.2.28.1.1.1.20 |
| rbnL2tpPCfgPoliceRate This object indicates the received aggregate
stream limit, in kilobits per second. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.21 |
| rbnL2tpPCfgPoliceBurst This object indicates the packet burst tolerance
for tunnels received by this peer group. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.22 |
| rbnL2tpPCfgLimitRate This object indicates the limit of the aggregate packet
stream transmitted through a tunnel in kilobits per
second (kpbs). | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.23 |
| rbnL2tpPCfgLimitBurst This object indicates the the packet burst tolerance limit
transmitted on a tunnel. | column | kbps SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.24 |
| rbnL2tpPCfgGroup This object indicates the l2tp group which is assigned
to this peer. Each peer configuration may be assigned only one
tunnel group. A length of 0 means that the group name was no… | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.2352.2.28.1.1.1.25 |
| rbnL2tpPCfgPref This object indicates the RADIUS based preference
number (used by tunnel groups only). A lower number indicates a
more favorible preference. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.26 |
| rbnL2tpPCfgPasswd This object indicates the password for this account
utilized when performing the connection handshake protocol with the
remote host. A length of 0 indicates that no password has b… | column | OctetString | .1.3.6.1.4.1.2352.2.28.1.1.1.27 |
| rbnL2tpPCfgHelloTimer This object defines the interval (in seconds) in
which Hello (or keep-alive) packets are to be sent
by local tunnels belonging to this tunnel configuration. | column | seconds Unsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.28 |
| rbnL2tpPCfgRecQue This object indicates whether there is receive
queueing of out of sequence messages. A value of true (1)
indicates that the messages are queued. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.28.1.1.1.29 |
| rbnL2tpPCfgSessContext This object indicates the name of the session
context. A size of 0 indicates that the context could not
be determined. Any context name length greater than 80
will be truncated… | column | OctetString | .1.3.6.1.4.1.2352.2.28.1.1.1.30 |
| rbnL2tpPCfgSessService The service group to which this session belongs.
A length of 0 indicates that no service group was assigned. | column | OctetString | .1.3.6.1.4.1.2352.2.28.1.1.1.31 |
| rbnL2tpPCfgEthEncap This object indicates the ethernet encap type. | column | EthEncapType | .1.3.6.1.4.1.2352.2.28.1.1.1.32 |
| rbnL2tpPCfgEthSession This object indicates the ethernet session of
which this is a part. This is only set for non PPPoE sessions
otherwise it will have a zero length. | column | OctetString | .1.3.6.1.4.1.2352.2.28.1.1.1.33 |
| rbnL2tpPCfgTunnelCount This object indicates the number of tunnels
that are active for this peer configuration. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2352.2.28.1.1.1.34 |
| rbnL2tpPCfgTunCtlErrs This object is a count of the number of tunnel
control errors encountered by tunnels connected to this peer. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2352.2.28.1.1.1.35 |
| rbnL2tpPCfgSessionCount This object is a count of the number of sessions
that are part of this peer. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.2352.2.28.1.1.1.36 |
| rbnL2tpPCfgRev This object identifies the firmware revision for the L2TP
protocol stack running on the remote peer. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2352.2.28.1.1.1.4 |
| rbnL2tpPCfgHostName This object identifies the name assigned to this peer on the
remote host system. A host name length of 0 means that this
information could not be obtained from the remote host. | column | OctetString | .1.3.6.1.4.1.2352.2.28.1.1.1.5 |
| rbnL2tpPCfgRadius This object indicates whether or not a RADIUS server
has been configured for this peer group. A value of true (1) indicates
that there is a RADIUS server and it will be used for … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.28.1.1.1.6 |
| rbnL2tpPCfgRemIPAddType This object identifies the address type contained in
rbnL2tpPCfgRemIPAdd. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2352.2.28.1.1.1.7 |
| rbnL2tpPCfgRemIPAdd This object identifies the remote IP address for
this tunnel (utilized only with User Datagram Protocol). | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2352.2.28.1.1.1.8 |
| rbnL2tpPCfgStatic This objects indicates whether the tunnel is
static or dynamic. A value of true (1) means that it is static.
A value of (2) indicates that it is dynamic. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2352.2.28.1.1.1.9 |