rcWlanConfigSystemSmltDataIPAddressType
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.207.1.6
Object
This object indicates the type of internet address in the
corresponding instance of rcWlanConfigSystemSmltDataIPAddress.
Currently,only the values ipv4(1) and ipv6(2) are allowed.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.207.1.6- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- rcWlanScalars
- Siblings
- 12
Syntax
INET-ADDRESS-MIBInetAddressType
- Source
- INET-ADDRESS-MIBInetAddressType
- Base type
Enumeration
Values & Constraints
Object Constraints
range: 0-32767
Type Values
0 | unknown |
1 | ipv4 |
2 | ipv6 |
3 | ipv4z |
4 | ipv6z |
16 | dns |
25 | l2vpn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcWlanVlanReserveVlanList The object is used as bitfield to indicate all the VLANs that are reserved.
Each VLAN is stored as a bit. The most-significant (left-most) bit
represents Vlan Id 1. | scalar | OctetString | .1.3.6.1.4.1.2272.1.207.1.1 |
| rcWlanConfigSmltTcpUdpBasePort TCP/UDP port to be used in SMLT. | scalar | Unsigned32 | .1.3.6.1.4.1.2272.1.207.1.10 |
| rcWlanConfigRemoteVlanStg The stg id for the remote vlan in the STP/MSTP mode.
In STP mode, the stg range is 1 to 64.
IN MSTP mode, the msti range is 0 to 63.
Setting to 255 is used to remove the valid stg… | scalar | Integer32 | .1.3.6.1.4.1.2272.1.207.1.11 |
| rcWlanConfigManagementAddressType This object indicates the type of address contained in the object
rcWlanConfigManagementAddress. | scalar | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.2272.1.207.1.12 |
| rcWlanConfigManagementAddress This address is used as the management interface of the wireless switch. | scalar | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.2272.1.207.1.13 |
| rcWlanVlanReserveNumberVlans The object contains the number of reserved VLANs. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.207.1.2 |
| rcWlanVlanReserveVlanInUse The object indicates if a Vlan Id from the reserved pool is in use. | scalar | OctetString | .1.3.6.1.4.1.2272.1.207.1.3 |
| rcWlanVlanReserveVlanInUseBySmlt The object indicates if a Vlan Id from the reserved pool is in use by
SMLT. | scalar | OctetString | .1.3.6.1.4.1.2272.1.207.1.4 |
| rcWlanVlanReserveSmltConfigMatch The object indicates if a Vlan Id from the reserved pool is the same for
SMLT peers. | scalar | OctetString | .1.3.6.1.4.1.2272.1.207.1.5 |
| rcWlanConfigSystemSmltDataIPAddress This object contains the IP address that will be used for
Wireless LAN switch SMLT data tunnel. | scalar | OctetString | .1.3.6.1.4.1.2272.1.207.1.7 |
| rcWlanConfigSmltHoldDownTimer Timer value, the range of value is from 0 to 3600. Do not start
forwarding data until local syncronization is done. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.207.1.8 |
| rcWlanConfigSmltEnabled This is used to enable SMLT wireless feature.
A value of true(1) means enabled. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.207.1.9 |