rcVlanLPortStaticMembers

RAPID-CITY · .1.3.6.1.4.1.2272.1.3.2.1.67
MIB view Table view

Object

column LPortSet 
The set of logical ports (for example, WLAN tunnels)
that are static members of this VLAN. A static member 
of a VLAN is always active and is never aged out.

Context

MIB
RAPID-CITY
OID
.1.3.6.1.4.1.2272.1.3.2.1.67
Type
column
Access
readonly
Status
current
Parent
rcVlanEntry
Table
rcVlanTable
Siblings
77

Syntax

LPortSet
Source
LPortSet
Base type
OctetString

Values & Constraints

Object Constraints
range: 0-2147483647
Type Constraints
range: 0..256

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcVlanId
A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
columnRcVlanIdOrNone.1.3.6.1.4.1.2272.1.3.2.1.1
rcVlanType
The type of VLAN, distinguished according to the policy used to define its port membership. VSP9000 does not support bySvlan(6) and ByIds(7).
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.10
rcVlanPortMembers
The set of ports that are members (static or dynamic) of this VLAN.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.11
rcVlanActiveMembers
The set of ports that are currently active in this VLAN. Active ports include all static ports and any dynamic ports where the VLAN policy was met.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.12
rcVlanStaticMembers
The set of ports that are static members of this VLAN. A static member of a VLAN is always active and is never aged out.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.13
rcVlanNotAllowToJoin
The set of ports that are not allowed to become members of this VLAN.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.14
rcVlanProtocolId
The protocol identifier of this VLAN. This value is meaningful only if rcVlanType is equal to byProtocolId(3). For other VLAN types it should have the value none(0).
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.15
rcVlanSubnetAddr
The IP subnet address of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.3.2.1.16
rcVlanSubnetMask
The IP subnet mask of this VLAN. This value is meaningful only if rcVlanType is equal to byIpSubnet(2). For other VLAN types it should have the value 0.0.0.0.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.3.2.1.17
rcVlanAgingTime
The timeout period (in seconds) used for aging out dynamic members of this VLAN. This field is only relevant for policy-based VLANs.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.18
rcVlanMacAddress
The MAC address assigned to the virtual router interface of this VLAN. This field is meaningful only if rcVlanRoutingEnable is equal to true(1).
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.2272.1.3.2.1.19
rcVlanName
An administratively-assigned name for this VLAN.
columnOctetString.1.3.6.1.4.1.2272.1.3.2.1.2
rcVlanRowStatus
Used to create/delete entries in the rcVlanTable.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.3.2.1.20
rcVlanIgmpSnoopEnable obsolete
A flag to note whether IGMP Snooping is enabled on this VLAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.21
rcVlanIgmpSnoopReportProxyEnable obsolete
A flag to note whether IGMP Report Proxy is enabled on this VLAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.22
rcVlanIgmpSnoopRobustness obsolete
This variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness variable may be increased. IGMP is robust to (Robustness …
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.23
rcVlanIgmpSnoopQueryInterval obsolete
The interval (in seconds) between IGMP Host-Query packets transmitted on this interface.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.24
rcVlanIgmpSnoopMRouterPorts obsolete
The set of ports in this VLAN that provide connectivity to an IP Multicast router.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.25
rcVlanUserDefinedPid
When rcVlanProtocolId is set to usrDefined(15) in a protocol-based VLAN, this field represents the 16-bit user defined protocol identifier.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.3.2.1.26
rcVlanIgmpSnoopActiveMRouterPorts obsolete
Active ports.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.27
rcVlanProtocolIds
Bitfield of protocol ids.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.3.2.1.28
rcVlanIgmpSnoopActiveQuerier obsolete
IP address of multicast querier router.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.3.2.1.29
rcVlanColor
An administratively-assigned color code for this VLAN. The value of this object is used by the VLAN Manager GUI tool to select a color when it draws this VLAN on the screen.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.3
rcVlanIgmpSnoopMRouterExpiration obsolete
Multicast querier router aging time out.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.3.2.1.30
rcVlanIgmpSnoopQuerierPort obsolete
The port on which the multicast querier router was heard.
columnInterfaceIndex.1.3.6.1.4.1.2272.1.3.2.1.31
rcVlanUserPriority
User priority level.
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.32
rcVlanQosLevel
Used to specify the Qos level packets, carried in this VLAN, should be processed with.
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.33
rcVlanTosValue
Tos value.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.34
rcVlanEncap
This is the encapsulation type for userdefined protocol based vlans. This is not meaningful for other types of vlan. The default value is null.
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.35
rcVlanFirewallVlanType
This is the firewall vlan type for port based vlans.
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.36
rcVlanFdbAging
The timeout period (in seconds) used for aging out fdb entries of this VLAN.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.37
rcVlanUpdateDynamicMacQosLevel
It is used to indicate whether to update qos level for dynamic learned mac add resses associated with a subnet-based or protocol-based vlan when vlan qos level changes. If it is …
columnEnableValue.1.3.6.1.4.1.2272.1.3.2.1.38
rcVlanUserDefinedPidList
A list of Protocol Id to usrDefined in a protocol-based VLAN, this field represents the list user defined protocol identifier.
columnOctetString.1.3.6.1.4.1.2272.1.3.2.1.39
rcVlanHighPriority obsolete
A flag to note whether frames in this VLAN should be assigned a high switching priority.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.4
rcVlanIgmpVer1SnoopMRouterPorts
The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP Version 1.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.40
rcVlanIgmpVer2SnoopMRouterPorts
The set of ports in this VLAN that provide connectivity to an IP Multicast router using IGMP version 2.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.41
rcVlanTlsIpmc
Enable/disable the IP Mcast for this SP IP service Vlan for TLS OE feature
columnEnableValue.1.3.6.1.4.1.2272.1.3.2.1.42
rcVlanFirewallClusterId
Firewall cluster Id
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.43
rcVlanOspfPassivePortMember
The set of ports in the vlan that are designated as ospf passive
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.44
rcVlanUnkDstMacDiscard
Enable/disable Unknown Destination Mac Discard on Vlan
columnEnableValue.1.3.6.1.4.1.2272.1.3.2.1.45
rcVlanNlbMode
NLB mode set on a VLAN.
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.46
rcVlanOperNlbMode
Oper NLB mode of a VLAN.
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.47
rcVlanVrfId
Indicates the Virtual Router to which the VLAN belongs
columnVrfIdentifier.1.3.6.1.4.1.2272.1.3.2.1.48
rcVlanVrfName
The Name of the Virtual Router to which the VLAN belongs
columnOctetString.1.3.6.1.4.1.2272.1.3.2.1.49
rcVlanRoutingEnable obsolete
A flag to note whether IP routing is enabled in this VLAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.5
rcVlanMgmtVlan
This displays the management vlan configuration
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.50
rcVlanApplyBtagEthertype
Used to apply user configured btag ethertype to the Vlan
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.51
rcVlanMmrp
This displays the MMRP enable state for the vlan
columnEnableValue.1.3.6.1.4.1.2272.1.3.2.1.52
rcVlanSource
This object indicates how this VLAN was created: static(1) - Indicates the VLAN was manually configured by an operator. dynamicMvmp(2) - …
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.53
rcVlanNodalMepList
List of nodal Meps assigned to this vlan. A mep consists of Domain Name, Association name and Mep Id separated by '.'. Each meps is separated by ',': <md1>.<ma1>.<mepid1>,<md2>.<m…
columnOctetString.1.3.6.1.4.1.2272.1.3.2.1.54
rcVlanNumOfNodalMep
Number of nodal meps assigned to this vlan
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.55
rcVlanNodalMipLevelList
List of nodal Mip levels assigned to this vlan that allows Mip functionality to be enabled on a per level per vlan basis. A mip level is represented by an integer ranging from 0 t…
columnOctetString.1.3.6.1.4.1.2272.1.3.2.1.56
rcVlanNumOfNodalMipLevel
Number of nodal mip levels assigned to this vlan that allows MIP functionality to be enabled on a per level per vlan basis.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.57
rcVlanDhcpOption82Enabled
This object is used to control whether DHCP option 82 is enabled for this VLAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.58
rcVlanIpMultinettingEnable
Indicate if the vlan is an Ip Multinetting vlan. If enabled, rcVlanAssociatedIpMultinettingVlan should be set to 0
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.59
rcVlanIfIndex
When rcVlanRoutingEnable is set to true(1), this value indicates the 'logical' ifIndex assigned to this VLAN. Otherwise, this value is meaningless and should be set to zero.
columnInterfaceIndex.1.3.6.1.4.1.2272.1.3.2.1.6
rcVlanAssociatedIpMultinettingVlan
Associated Ip Multinetting vlan Id whose rcVlanIpMultinettingEnable attribute is set
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.60
rcVlanPlsbIsid
Plsb i-sid number assigned to a C-vlan or the i-sid value for primary private VLAN. Default 0 value indicates that no i-sid has been assigned.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.61
rcVlanVoiceEnabled
This object is used to control whether voice option is enabled for this VLAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.62
rcVlanRmonEnable
Indicate if the vlan is enabled for Remote Monitoring
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.63
rcVlanIpsecEnable deprecated
Indicate if the vlan is enabled for IPSEC. at place of this value use RcIpConfEntry for IPV4 and use RcIpv6InterfaceEntry for IPV6. This field changed to deprecated
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.64
rcVlanLPortMembers
The set of logical ports (for example, WLAN tunnels) that are members (dynamic) of this VLAN.
columnLPortSet.1.3.6.1.4.1.2272.1.3.2.1.65
rcVlanLPortActiveMembers
The set of logical ports (for example, WLAN tunnels) that are currently active in this VLAN. Active ports include all dynamic ports where the VLAN policy was met.
columnLPortSet.1.3.6.1.4.1.2272.1.3.2.1.66
rcVlanLPortNotAllowToJoin
The set of logical ports (for example, WLAN tunnels) that are not allowed to become members of this VLAN.
columnLPortSet.1.3.6.1.4.1.2272.1.3.2.1.68
rcVlanRspanEnabled
This object is used to control whether rspan option is enabled for this VLAN.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.69
rcVlanAction
VLAN related actions.
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.7
rcVlanSpbMcast
Enable/disable SPB multicast on Vlan
columnEnableValue.1.3.6.1.4.1.2272.1.3.2.1.70
rcVlanSecondaryVlanId
A value that uniquely identifies the secondary Virtual LAN associated with the primary private VLAN. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
columnRcVlanIdOrNone.1.3.6.1.4.1.2272.1.3.2.1.71
rcVlanSecondaryIsid
The i-sid number assigned to a secondary VLAN if it exists. Default 0 value.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.72
rcVlanPimGatewayEnable
Enable/disable PIM Gateway on Vlan
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.73
rcVlanIpv6FhsSnoopDhcpEnable
Indicate if IPv6 DHCP snooping is enabled on the vlan
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.74
rcVlanIpv6FhsNDInspectionEnable
Indicate if ND inspection is enabled on the vlan
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.75
rcVlanDvrEnable
Enable/disable DVR on Vlan
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.3.2.1.76
rcVlanDvrGwIpv4Addr
Gateway IPv4 address for this DVR enabled node on Vlan.
columnSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.3.2.1.77
rcVlanUntaggedPortMembers
The set of untagged ports that are members of this VLAN.
columnPortSet.1.3.6.1.4.1.2272.1.3.2.1.78
rcVlanResult
The result from the last VLAN action.
columnEnumeration.1.3.6.1.4.1.2272.1.3.2.1.8
rcVlanStgId
Indicates the Spanning Tree Group (STG) used by this VLAN to determine the state of its ports. If this VLAN is not associated with any STG, this value should be set to zero.
columnInteger32.1.3.6.1.4.1.2272.1.3.2.1.9