rcVlanHighPriority
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.3.2.1.4
Object
A flag to note whether frames in this VLAN should be assigned a high switching priority.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.3.2.1.4- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- rcVlanEntry
- Table
- rcVlanTable
- Siblings
- 77
Values & Constraints
Enumerated Values
1 | access |
2 | trunk |
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcVlanId A value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag. | column | RcVlanIdOrNone | .1.3.6.1.4.1.2272.1.3.2.1.1 |
| rcVlanType The type of VLAN, distinguished according to the
policy used to define its port membership.
VSP9000 does not support bySvlan(6) and ByIds(7). | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.10 |
| rcVlanPortMembers The set of ports that are members (static or
dynamic) of this VLAN. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.11 |
| rcVlanActiveMembers The set of ports that are currently active in
this VLAN. Active ports include all static ports
and any dynamic ports where the VLAN policy was
met. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.12 |
| rcVlanStaticMembers The set of ports that are static members of this
VLAN. A static member of a VLAN is always active
and is never aged out. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.13 |
| rcVlanNotAllowToJoin The set of ports that are not allowed to become
members of this VLAN. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.14 |
| rcVlanProtocolId The protocol identifier of this VLAN. This value
is meaningful only if rcVlanType is equal to
byProtocolId(3). For other VLAN types it should
have the value none(0). | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.15 |
| rcVlanSubnetAddr The IP subnet address of this VLAN. This value
is meaningful only if rcVlanType is equal to
byIpSubnet(2). For other VLAN types it should
have the value 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.3.2.1.16 |
| rcVlanSubnetMask The IP subnet mask of this VLAN. This value
is meaningful only if rcVlanType is equal to
byIpSubnet(2). For other VLAN types it should
have the value 0.0.0.0. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.3.2.1.17 |
| rcVlanAgingTime The timeout period (in seconds) used for aging
out dynamic members of this VLAN. This field is
only relevant for policy-based VLANs. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.18 |
| rcVlanMacAddress The MAC address assigned to the virtual router
interface of this VLAN. This field is meaningful
only if rcVlanRoutingEnable is equal to true(1). | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.3.2.1.19 |
| rcVlanName An administratively-assigned name for this VLAN. | column | OctetString | .1.3.6.1.4.1.2272.1.3.2.1.2 |
| rcVlanRowStatus Used to create/delete entries in the rcVlanTable. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.3.2.1.20 |
| rcVlanIgmpSnoopEnable obsolete A flag to note whether IGMP Snooping is enabled
on this VLAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.21 |
| rcVlanIgmpSnoopReportProxyEnable obsolete A flag to note whether IGMP Report Proxy is
enabled on this VLAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.22 |
| rcVlanIgmpSnoopRobustness obsolete This variable allows tuning for the expected
packet loss on a subnet. If a subnet is expected
to be lossy, the Robustness variable may be
increased. IGMP is robust to (Robustness … | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.23 |
| rcVlanIgmpSnoopQueryInterval obsolete The interval (in seconds) between IGMP Host-Query
packets transmitted on this interface. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.24 |
| rcVlanIgmpSnoopMRouterPorts obsolete The set of ports in this VLAN that provide
connectivity to an IP Multicast router. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.25 |
| rcVlanUserDefinedPid When rcVlanProtocolId is set to usrDefined(15)
in a protocol-based VLAN, this field represents
the 16-bit user defined protocol identifier. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.3.2.1.26 |
| rcVlanIgmpSnoopActiveMRouterPorts obsolete Active ports. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.27 |
| rcVlanProtocolIds Bitfield of protocol ids. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.3.2.1.28 |
| rcVlanIgmpSnoopActiveQuerier obsolete IP address of multicast querier router. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.3.2.1.29 |
| rcVlanColor An administratively-assigned color code for this
VLAN. The value of this object is used by the VLAN
Manager GUI tool to select a color when it draws
this VLAN on the screen. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.3 |
| rcVlanIgmpSnoopMRouterExpiration obsolete Multicast querier router aging time out. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.3.2.1.30 |
| rcVlanIgmpSnoopQuerierPort obsolete The port on which the multicast querier router
was heard. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.3.2.1.31 |
| rcVlanUserPriority User priority level. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.32 |
| rcVlanQosLevel Used to specify the Qos level packets, carried in this
VLAN, should be processed with. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.33 |
| rcVlanTosValue Tos value. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.34 |
| rcVlanEncap This is the encapsulation type for userdefined protocol
based vlans. This is not meaningful for other types of
vlan. The default value is null. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.35 |
| rcVlanFirewallVlanType This is the firewall vlan type for port based
vlans. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.36 |
| rcVlanFdbAging The timeout period (in seconds) used for aging
out fdb entries of this VLAN. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.37 |
| rcVlanUpdateDynamicMacQosLevel It is used to indicate whether to update qos
level for dynamic learned mac add resses
associated with a subnet-based or protocol-based
vlan when vlan qos level changes. If it is … | column | EnableValue | .1.3.6.1.4.1.2272.1.3.2.1.38 |
| rcVlanUserDefinedPidList A list of Protocol Id to usrDefined in a protocol-based
VLAN, this field represents the list user defined protocol identifier. | column | OctetString | .1.3.6.1.4.1.2272.1.3.2.1.39 |
| rcVlanIgmpVer1SnoopMRouterPorts The set of ports in this VLAN that provide connectivity
to an IP Multicast router using IGMP Version 1. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.40 |
| rcVlanIgmpVer2SnoopMRouterPorts The set of ports in this VLAN that provide connectivity
to an IP Multicast router using IGMP version 2. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.41 |
| rcVlanTlsIpmc Enable/disable the IP Mcast for this SP IP service Vlan for
TLS OE feature | column | EnableValue | .1.3.6.1.4.1.2272.1.3.2.1.42 |
| rcVlanFirewallClusterId Firewall cluster Id | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.43 |
| rcVlanOspfPassivePortMember The set of ports in the vlan that are designated as
ospf passive | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.44 |
| rcVlanUnkDstMacDiscard Enable/disable Unknown Destination Mac Discard on Vlan | column | EnableValue | .1.3.6.1.4.1.2272.1.3.2.1.45 |
| rcVlanNlbMode NLB mode set on a VLAN. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.46 |
| rcVlanOperNlbMode Oper NLB mode of a VLAN. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.47 |
| rcVlanVrfId Indicates the Virtual Router to which the VLAN belongs | column | VrfIdentifier | .1.3.6.1.4.1.2272.1.3.2.1.48 |
| rcVlanVrfName The Name of the Virtual Router to which the VLAN belongs | column | OctetString | .1.3.6.1.4.1.2272.1.3.2.1.49 |
| rcVlanRoutingEnable obsolete A flag to note whether IP routing is enabled in
this VLAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.5 |
| rcVlanMgmtVlan This displays the management vlan configuration | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.50 |
| rcVlanApplyBtagEthertype Used to apply user configured btag ethertype to
the Vlan | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.51 |
| rcVlanMmrp This displays the MMRP enable state for the vlan | column | EnableValue | .1.3.6.1.4.1.2272.1.3.2.1.52 |
| rcVlanSource This object indicates how this VLAN was created:
static(1) - Indicates the VLAN was manually configured by an
operator.
dynamicMvmp(2) - … | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.53 |
| rcVlanNodalMepList List of nodal Meps assigned to this vlan. A mep
consists of Domain Name, Association name and Mep
Id separated by '.'. Each meps is separated by ',':
<md1>.<ma1>.<mepid1>,<md2>.<m… | column | OctetString | .1.3.6.1.4.1.2272.1.3.2.1.54 |
| rcVlanNumOfNodalMep Number of nodal meps assigned to this vlan | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.55 |
| rcVlanNodalMipLevelList List of nodal Mip levels assigned to this vlan that
allows Mip functionality to be enabled on a per level
per vlan basis. A mip level is represented by an
integer ranging from 0 t… | column | OctetString | .1.3.6.1.4.1.2272.1.3.2.1.56 |
| rcVlanNumOfNodalMipLevel Number of nodal mip levels assigned to this vlan that
allows MIP functionality to be enabled on a per level
per vlan basis. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.57 |
| rcVlanDhcpOption82Enabled This object is used to control whether DHCP option 82
is enabled for this VLAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.58 |
| rcVlanIpMultinettingEnable Indicate if the vlan is an Ip Multinetting vlan. If enabled,
rcVlanAssociatedIpMultinettingVlan should be set to 0 | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.59 |
| rcVlanIfIndex When rcVlanRoutingEnable is set to true(1), this
value indicates the 'logical' ifIndex assigned to
this VLAN. Otherwise, this value is meaningless
and should be set to zero. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.3.2.1.6 |
| rcVlanAssociatedIpMultinettingVlan Associated Ip Multinetting vlan Id whose rcVlanIpMultinettingEnable
attribute is set | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.60 |
| rcVlanPlsbIsid Plsb i-sid number assigned to a C-vlan or the i-sid
value for primary private VLAN. Default 0 value
indicates that no i-sid has been assigned. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.61 |
| rcVlanVoiceEnabled This object is used to control whether voice option
is enabled for this VLAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.62 |
| rcVlanRmonEnable Indicate if the vlan is enabled for Remote Monitoring | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.63 |
| rcVlanIpsecEnable deprecated Indicate if the vlan is enabled for IPSEC.
at place of this value use RcIpConfEntry for IPV4
and use RcIpv6InterfaceEntry for IPV6. This field
changed to deprecated | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.64 |
| rcVlanLPortMembers The set of logical ports (for example, WLAN tunnels)
that are members (dynamic) of this VLAN. | column | LPortSet | .1.3.6.1.4.1.2272.1.3.2.1.65 |
| rcVlanLPortActiveMembers The set of logical ports (for example, WLAN tunnels)
that are currently active in this VLAN. Active ports
include all dynamic ports where the VLAN policy was met. | column | LPortSet | .1.3.6.1.4.1.2272.1.3.2.1.66 |
| rcVlanLPortStaticMembers The set of logical ports (for example, WLAN tunnels)
that are static members of this VLAN. A static member
of a VLAN is always active and is never aged out. | column | LPortSet | .1.3.6.1.4.1.2272.1.3.2.1.67 |
| rcVlanLPortNotAllowToJoin The set of logical ports (for example, WLAN tunnels)
that are not allowed to become members of this VLAN. | column | LPortSet | .1.3.6.1.4.1.2272.1.3.2.1.68 |
| rcVlanRspanEnabled This object is used to control whether rspan option
is enabled for this VLAN. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.69 |
| rcVlanAction VLAN related actions. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.7 |
| rcVlanSpbMcast Enable/disable SPB multicast on Vlan | column | EnableValue | .1.3.6.1.4.1.2272.1.3.2.1.70 |
| rcVlanSecondaryVlanId A value that uniquely identifies the secondary
Virtual LAN associated with the primary private VLAN.
This value corresponds to the lower 12 bits in
the IEEE 802.1Q VLAN Tag. | column | RcVlanIdOrNone | .1.3.6.1.4.1.2272.1.3.2.1.71 |
| rcVlanSecondaryIsid The i-sid number assigned to a secondary VLAN if it
exists. Default 0 value. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.72 |
| rcVlanPimGatewayEnable Enable/disable PIM Gateway on Vlan | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.73 |
| rcVlanIpv6FhsSnoopDhcpEnable Indicate if IPv6 DHCP snooping is enabled on the vlan | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.74 |
| rcVlanIpv6FhsNDInspectionEnable Indicate if ND inspection is enabled on the vlan | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.75 |
| rcVlanDvrEnable Enable/disable DVR on Vlan | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.3.2.1.76 |
| rcVlanDvrGwIpv4Addr Gateway IPv4 address for this DVR enabled node on Vlan. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.3.2.1.77 |
| rcVlanUntaggedPortMembers The set of untagged ports that are members of this VLAN. | column | PortSet | .1.3.6.1.4.1.2272.1.3.2.1.78 |
| rcVlanResult The result from the last VLAN action. | column | Enumeration | .1.3.6.1.4.1.2272.1.3.2.1.8 |
| rcVlanStgId Indicates the Spanning Tree Group (STG) used by
this VLAN to determine the state of its ports.
If this VLAN is not associated with any STG, this
value should be set to zero. | column | Integer32 | .1.3.6.1.4.1.2272.1.3.2.1.9 |