rcSysLastSaveToNVRam
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.1.18
Object
scalar
SNMPv2-SMITimeTicks
SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of a configuration file.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.1.18- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rcSystem
- Siblings
- 118
Syntax
SNMPv2-SMITimeTicks
- Source
- SNMPv2-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Enumerated Values
1 | autoCommit |
2 | manualCommit |
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcSysIpAddr This entity's IP address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.1.1 |
| rcSysLastChange Last management initiated configuration
change since sysUpTime. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.10 |
| rcSysLicenseTrialDaysLeft This indicates days left before License Trial
Period will expire. | scalar | Unsigned32 | .1.3.6.1.4.1.2272.1.1.100 |
| rcSysLicenseFileName File name used in conjunction with rcSysAction.
This file name will be used to specify a PLDS License file | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.101 |
| rcSysCopHighCpuUtilThreshold CopHighCpuUtilThreshold % | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.102 |
| rcSysCopHighCpuUtilLogTime rcSysCopHighCpuUtilLogTime in secs | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.103 |
| rcSysConfigChangeFlag Indicates whether the config file has been changed after loading of config | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.104 |
| rcSysBootUpgradeMode To set the mode of bootupgrade | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.105 |
| rcSysBootUpgradeTime To set time for bootupgrade | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.106 |
| rcSysBootUpgradeCsuMode To set the mode of Csu for bootupgrade | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.107 |
| rcSysUpgradeStatus To get the Upgrade status | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.108 |
| rcSysUpgradeCompleteStatus To get the Upgrade status | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.109 |
| rcSysLastVlanChange Last management initiated VLAN configuration
change since sysUpTime. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.11 |
| rcSysBootUpgradeConsistencyCheck To enable or disable the consistency check in BootUpgrade | scalar | EnableValue | .1.3.6.1.4.1.2272.1.1.110 |
| rcSysAutoSaveConfigState To enable or disable the autosaveconfig feature | scalar | EnableValue | .1.3.6.1.4.1.2272.1.1.111 |
| rcSysAutoSaveConfigFileName The auto config file name in which the configurations have to be saved automatically. | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.112 |
| rcSysAutoSaveConfigInterval To set the Interval for autosave config | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.113 |
| rcSysAutoSaveConfigChangeFlag Indicates whether there are any configuration changes after last auto save config. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.114 |
| rcSysAutoSaveConfigCounter Auto save config counter that should be prefixed to the filename. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.115 |
| rcSysTotalPower The total power for the whole chassis. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.116 |
| rcSysRedundantPower Used to indicate the redundant power on the chassis.
The redundant power is per power supply unit | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.117 |
| rcSysAuthSuccessTrapEnable Used to enable/disable the trap send for authenticaion
success trap rcnAuthenticationSuccess. It only allow
to be set when snmpEnableAuthenTraps is enabled.
I will be set to disab… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.118 |
| rcSysUdpSrcByVirtualIpEnable Used to enable/disable virtual ip as udp source. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.119 |
| rcSysLastStatisticsReset Last management initiated statistics reset
since sysUpTime. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.12 |
| rcSysSoftwareTable A list of software releases added to the switch. Maximum
of 6 added releases can be present in the switch. | table | - | .1.3.6.1.4.1.2272.1.1.120 |
| rcSysDataPathFaultShutdownEnable Used to enable/disable data path fault shutdown. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.121 |
| rcSysDnsServerIpv6Addr DNS server's IP address . Used by trap rcnDNSv6RequestResponseTrap | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.2272.1.1.122 |
| rcSysBufferUtil Buffer utilization as a percentage of the
total amount of buffer space in the system.
A high value indicates congestion. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.13 |
| rcSysBufferUtilPeak The largest buffer utilization since sysUpTime | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.14 |
| rcSysBufferUtilPeakTime Timestamp for rcSysPeakBandwidth | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.15 |
| rcSysNVRamSize Total Non-volatile RAM in Kbytes | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.16 |
| rcSysNVRamUsed Non-volatile RAM in use in Kbytes | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.17 |
| rcSysLastSaveToStandbyNVRam SysUpTime of the last time when the standby NVRAM
(on the back-up CPU board) was written to. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.19 |
| rcSysNetMask This entity's subnet mask. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.1.2 |
| rcSysCpuUtil Percentage of CPU utilization.
This object is not supported on VSP. VSP uses
rcKhiSlotCpuCurrentUtil | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.20 |
| rcSysSwitchFabricUtil Percentage of Switching Fabric utilization. Object
is not support on VSP | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.21 |
| rcSysRmonMemSize Amount of RAM in bytes to allocate for RMON
to use when rcSysRmonEnable is TRUE. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.22 |
| rcSysRmonEnable Control whether the RMON feature should be
enabled.
To enable the RMON feature, set this variable to
true. The RMON agent in the device will get
started immediately… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.23 |
| rcSysRmonSaveConfig deprecated Control whether RMON configuration information
should be saved to NVRAM so RMON settings can
be automatically reinstalled after a system
reboot.
Setting rcSysRmonSa… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.24 |
| rcSysRmonTrapOption Used to indicate whether RMON traps should be
sent to only the owner of the RMON alarm (i.e.,
the manager that created the alarm entry) or
all trap recipients in the system trap … | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.25 |
| rcSysSupportRouting Used to indicate whether routing is supported
in this product. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.26 |
| rcSysSupportWebServer Used to indicate whether WebServer is supported
in this product. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.27 |
| rcSysLastIpAddrChange Last management initiated IP address change
since sysUpTime. Any addition or deletion of
an IP address to a single routable port or
a VLAN is time-stamped by this variable. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.28 |
| rcSysCommReadWriteLayer3 When an SNMP message is received by this entity, the
community string in the message is compared with this
string third. If it matches, read-write access is
granted to all Laye… | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.29 |
| rcSysBroadcast This entity's broadcast address. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.1.3 |
| rcSysCommReadWriteLayer2 When an SNMP message is received by this entity, the
community string in the message is compared with this
string fourth. If it matches, read-write access is
granted to all La… | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.30 |
| rcSysAccessPolicyEnable Used to configure the system access policy feature.
if 'true', the rcSysAccessPolicyTable is examined to
determine which packets should be allowed or denied
access to this device. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.31 |
| rcSysDefaultRuntimeConfigFileName default config. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.1.32 |
| rcSysDefaultBootConfigFileName default boot config. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.1.33 |
| rcSysConfigFileName File name used in conjunction with rcSysAction.
If rcSysAction is set to 'saveRuntimeConfig' or
'saveRuntimeConfigToSlave' then this file name
will be used instead of t… | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.34 |
| rcSysLastRunTimeConfigSave SysUpTime of the last time when the run time
configuration was written to. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.35 |
| rcSysLastRunTimeConfigSaveToSlave SysUpTime of the last time when the run time
configuration was written to slave NVRAM. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.36 |
| rcSysLastBootConfigSave SysUpTime of the last time when the boot
configuration was written to. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.37 |
| rcSysLastBootConfigSaveOnSlave SysUpTime of the last time when the boot
configuration was written on the slave NVRAM. | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.38 |
| rcSysRmonUtilizationMethod Used to control whether RMON should use a half-duplex
or full-duplex formula to calculate port utilization.
When set to 'halfDuplex', RMON will use InOctets and
the port's speed t… | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.39 |
| rcSysCommReadWriteAll When an SNMP message is received by this entity, the
community string in the message is compared with this
string first. If it matches, read-write access is
granted to all items … | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.4 |
| rcSysCommReadWriteLayer1 read-write L1 access | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.40 |
| rcSysOtherBufferUtil bw currently consumed | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.41 |
| rcSysOtherBufferUtilPeak peak bw since reset | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.42 |
| rcSysOtherBufferUtilPeakTime timestamp for rcSysPeakBw | scalar | SNMPv2-SMITimeTicks | .1.3.6.1.4.1.2272.1.1.43 |
| rcSysOtherCpuUtil % cpu utilization | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.44 |
| rcSysOtherSwitchFabricUtil % switch fabric util | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.45 |
| rcSysDramSize Dram size in mega-bytes. It is not supported
on VSP | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.46 |
| rcSysDramUsed Dram used in percentage. It is not supported
on VSP | scalar | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.2272.1.1.47 |
| rcSysDramFree Dram free size in kilo-bytes. It is not supported
on VSP | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.48 |
| rcSysDramMaxBlockFree Dram max block free size in kilo-bytes. it is not
supported on VSP | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.49 |
| rcSysCommReadWrite When an SNMP message is received by this entity, the
community string in the message is compared with this
string second. If it matches, read-write access is
granted to all items… | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.5 |
| rcSysVirtualIpAddr Virtual IP is an IP address that owned and
advertised only by the master CPU. So whichever
CPU is master registers this IP address. Unlike the
management IP address, this address… | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.1.51 |
| rcSysVirtualNetMask Net mask of the management virtual Ip address | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.1.52 |
| rcSysReadWriteLevel The status of the read/write level | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.53 |
| rcSysMTUSize This is the maximum transmission size of frames that all
the ports on the chassis support.
Note: MicroVSP (VSP1xxx) supports frame size 1950,1522,9022.
Other platforms support fr… | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.55 |
| rcSysClockSyncTime Time interval at which RTC and system clocks are
synchronized.Not supported in VSP 3.3 | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.56 |
| rcSysForceTrapSender This is a flag that if user wants to configured
CLIP (Circuit Less IP) as trap originator. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.57 |
| rcSysMrouteStrLimit enable or disable mroute stream limit in system. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.58 |
| rcSysCommReadOnly When an SNMP message is received by this entity, the
community string in the message is compared with this
string third. If it matches, read-only access is
granted to all items i… | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.6 |
| rcSysTrapRecvTable deprecated The trap receiver table (0 to 25 entries). This
table lists the addresses of Network Management
Stations that should receive trap messages from
this entity when an exception con… | table | - | .1.3.6.1.4.1.2272.1.1.60 |
| rcSysAccessPolicyTable Management access policy table. This table is
used to permit or deny access to this device via
the specified source Id. | table | - | .1.3.6.1.4.1.2272.1.1.61 |
| rcSysTrapSenderTable The trap sender table (0 to 25 entries). This
table lists the addresses of Network Management
Stations and the Source Address that should receive
trap messages from this entity … | table | - | .1.3.6.1.4.1.2272.1.1.62 |
| rcSysDnsServerListTableSize Used to indicate the number of entries in the
table. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.63 |
| rcSysDnsServerListTable DNS serever list table used to store the
details of the DNS server configured. | table | - | .1.3.6.1.4.1.2272.1.1.64 |
| rcSysDnsHostTable DNS Host table. | table | - | .1.3.6.1.4.1.2272.1.1.65 |
| rcSysMsgLogFrequency Used to specify the maximum frequency/count
of the occurence of the Log Message. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.66 |
| rcSysMsgLogText A textual string containing the first four
characters of the Log Message. | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.67 |
| rcSysForceIpHdrSender Flag to decide if IP header source address will
be matched with SNMP header sender networks. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.68 |
| rcSysVlanMaxId The maximum vlan Id that supported | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.69 |
| rcSysVersion Software version running on device | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.7 |
| rcSysDnsDomainName Default domain used for querying the DNS Server. | scalar | OctetString | .1.3.6.1.4.1.2272.1.1.70 |
| rcSysDnsServerListIpAddr DNS server's IP address | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.1.71 |
| rcSysDnsRequestType DNS Type: Whether it was Dns Request or a Response | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.72 |
| rcSysSpanningTreeOperMode This object indicates the current spanning-tree mode of the system. .
The meaning of specific values is:
nortelStpg(1) .. The older proprietary mode which supports multiple spann… | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.73 |
| rcSysSpanningTreeAdminMode This object indicates the desired spanning-tree mode of the system.
The meaning of specific values is:
nortelStpg(1) .. The older proprietary mode which supports multiple spannin… | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.74 |
| rcSysAutoRecoverDelay Time interval in seconds after which auto-recovery
runs on ports to clear action taken by cp-limit,
link flap or loop detect | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.75 |
| rcSysMacFlapLimitTime Time limit in milliseconds for MAC flapping for
loop-detect feature | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.76 |
| rcSysMacFlapLimitCount Number of times mac flapping can happen for loop-detect
feature | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.77 |
| rcSysExtCplimitEnable enable or disable extended CP-LIMIT in system. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.78 |
| rcSysExtCplimitMinCongTime Minimum time for which System octapid should be
congested to trigger congestion algorithm for extended
CP-LIMIT in mSecs | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.79 |
| rcSysAction deprecated Initiate a system action. | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.8 |
| rcSysExtCplimitMaxPorts Maximum number of ports which need to be monitored
for congestion in Extended CP-LIMIT | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.80 |
| rcSysExtCplimitPortCongTime Minimum time for which ingress traffic utilization rate
of a monitored port should stay more than the allowed limits
in order to disable the port for extended CP-LIMIT in Secs | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.81 |
| rcSysExtCplimitTrapLevel Indicates the trap level for extended CP-LIMIT | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.82 |
| rcSysExtCplimitSysOctapidCongested Indicates whether system octapid congestion detected for
extended cp-limit | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.83 |
| rcSysExtCplimitPortsMonitored Indicates whether ports has been shutdown due to extended
cp-limit | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.84 |
| rcSysExtCplimitPortsShutDown Indicates whether ports has been shutdown due to
extended Cp-limit | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.1.85 |
| rcSysActionL1 Initiate a system action for layer1 user | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.86 |
| rcSysActionL2 Initiate a system action for layer2 user | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.87 |
| rcSysActionL3 Initiate a system action for layer3 user | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.88 |
| rcSysActionRwa Initiate a system action. | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.89 |
| rcSysResult Result from the last system action. | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.9 |
| rcSysPowerUsage The current power usage for the whole chassis. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.90 |
| rcSysPowerAvailable The current power available for the whole chassis. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.1.91 |
| rcSysBpduStartMacAddress Starting Multicast MAC address for BPDUs | scalar | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.1.92 |
| rcSysBpduMacAddressMask BPDU MAC address Mask | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.93 |
| rcSysFrcMsgControlTable Management Force-msg Control table. This table is used to
specify the pattern for Force-msg Control | table | - | .1.3.6.1.4.1.2272.1.1.94 |
| rcSysAccPolSnmpGrpTable SNMP group list for access policy | table | - | .1.3.6.1.4.1.2272.1.1.95 |
| rcSysVirtualIpv6Addr Virtual IP is an IP address that owned and
advertised only by the master CPU. So whichever
CPU is master registers this IP address. | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.2272.1.1.96 |
| rcSysVirtualIpv6PrefixLength The length of the virtual ipv6 addr prefix (in bits). | scalar | Integer32 | .1.3.6.1.4.1.2272.1.1.97 |
| rcSysConfigMode This is used in conjunction with rcSysAction inorder
to decide the mode in which the config file is going to
be saved in. | scalar | Enumeration | .1.3.6.1.4.1.2272.1.1.98 |
| rcSysExtendedPingBypass | node | - | .1.3.6.1.4.1.2272.1.1.99 |