rcSysLastBootConfigSaveOnSlave

RAPID-CITY · .1.3.6.1.4.1.2272.1.1.38
MIB view Table view

Object

scalar SNMPv2-SMITimeTicks 
SysUpTime of the last time when the boot
configuration was written on the slave NVRAM.

Context

MIB
RAPID-CITY
OID
.1.3.6.1.4.1.2272.1.1.38
Type
scalar
Access
readonly
Status
current
Parent
rcSystem
Siblings
118

Syntax

SNMPv2-SMITimeTicks
Source
SNMPv2-SMITimeTicks
Base type
Unsigned32

Values & Constraints

Enumerated Values
1none
2inProgress
3noResponse
4fileAccessError
5badFlash
6flashEraseFailed
7pcmciaEraseFailed
8success
9fail
10writeToNvramFailed
11flashWriteFailed
12pcmciaWriteFailed
13configFileTooBig
14imageFileTooBig
15noPcmciaDetect
16pcmciaNotSupported
17invalidFile
18noMemory
19xferError
20crcError
21readNvramFailed
22pcmciaWriteProtect
Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcSysIpAddr
This entity's IP address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.1
rcSysLastChange
Last management initiated configuration change since sysUpTime.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.10
rcSysLicenseTrialDaysLeft
This indicates days left before License Trial Period will expire.
scalarUnsigned32.1.3.6.1.4.1.2272.1.1.100
rcSysLicenseFileName
File name used in conjunction with rcSysAction. This file name will be used to specify a PLDS License file
scalarOctetString.1.3.6.1.4.1.2272.1.1.101
rcSysCopHighCpuUtilThreshold
CopHighCpuUtilThreshold %
scalarInteger32.1.3.6.1.4.1.2272.1.1.102
rcSysCopHighCpuUtilLogTime
rcSysCopHighCpuUtilLogTime in secs
scalarInteger32.1.3.6.1.4.1.2272.1.1.103
rcSysConfigChangeFlag
Indicates whether the config file has been changed after loading of config
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.104
rcSysBootUpgradeMode
To set the mode of bootupgrade
scalarEnumeration.1.3.6.1.4.1.2272.1.1.105
rcSysBootUpgradeTime
To set time for bootupgrade
scalarInteger32.1.3.6.1.4.1.2272.1.1.106
rcSysBootUpgradeCsuMode
To set the mode of Csu for bootupgrade
scalarEnumeration.1.3.6.1.4.1.2272.1.1.107
rcSysUpgradeStatus
To get the Upgrade status
scalarEnumeration.1.3.6.1.4.1.2272.1.1.108
rcSysUpgradeCompleteStatus
To get the Upgrade status
scalarEnumeration.1.3.6.1.4.1.2272.1.1.109
rcSysLastVlanChange
Last management initiated VLAN configuration change since sysUpTime.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.11
rcSysBootUpgradeConsistencyCheck
To enable or disable the consistency check in BootUpgrade
scalarEnableValue.1.3.6.1.4.1.2272.1.1.110
rcSysAutoSaveConfigState
To enable or disable the autosaveconfig feature
scalarEnableValue.1.3.6.1.4.1.2272.1.1.111
rcSysAutoSaveConfigFileName
The auto config file name in which the configurations have to be saved automatically.
scalarOctetString.1.3.6.1.4.1.2272.1.1.112
rcSysAutoSaveConfigInterval
To set the Interval for autosave config
scalarInteger32.1.3.6.1.4.1.2272.1.1.113
rcSysAutoSaveConfigChangeFlag
Indicates whether there are any configuration changes after last auto save config.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.114
rcSysAutoSaveConfigCounter
Auto save config counter that should be prefixed to the filename.
scalarInteger32.1.3.6.1.4.1.2272.1.1.115
rcSysTotalPower
The total power for the whole chassis.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.116
rcSysRedundantPower
Used to indicate the redundant power on the chassis. The redundant power is per power supply unit
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.117
rcSysAuthSuccessTrapEnable
Used to enable/disable the trap send for authenticaion success trap rcnAuthenticationSuccess. It only allow to be set when snmpEnableAuthenTraps is enabled. I will be set to disab…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.118
rcSysUdpSrcByVirtualIpEnable
Used to enable/disable virtual ip as udp source.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.119
rcSysLastStatisticsReset
Last management initiated statistics reset since sysUpTime.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.12
rcSysSoftwareTable
A list of software releases added to the switch. Maximum of 6 added releases can be present in the switch.
table-.1.3.6.1.4.1.2272.1.1.120
rcSysDataPathFaultShutdownEnable
Used to enable/disable data path fault shutdown.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.121
rcSysDnsServerIpv6Addr
DNS server's IP address . Used by trap rcnDNSv6RequestResponseTrap
scalarIPV6-TCIpv6Address.1.3.6.1.4.1.2272.1.1.122
rcSysBufferUtil
Buffer utilization as a percentage of the total amount of buffer space in the system. A high value indicates congestion.
scalarInteger32.1.3.6.1.4.1.2272.1.1.13
rcSysBufferUtilPeak
The largest buffer utilization since sysUpTime
scalarInteger32.1.3.6.1.4.1.2272.1.1.14
rcSysBufferUtilPeakTime
Timestamp for rcSysPeakBandwidth
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.15
rcSysNVRamSize
Total Non-volatile RAM in Kbytes
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.16
rcSysNVRamUsed
Non-volatile RAM in use in Kbytes
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.17
rcSysLastSaveToNVRam
SysUpTime of the last time when NVRAM was written to. This could be a save of the system configuration or via a file transfer of a configuration file.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.18
rcSysLastSaveToStandbyNVRam
SysUpTime of the last time when the standby NVRAM (on the back-up CPU board) was written to.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.19
rcSysNetMask
This entity's subnet mask.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.2
rcSysCpuUtil
Percentage of CPU utilization. This object is not supported on VSP. VSP uses rcKhiSlotCpuCurrentUtil
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.20
rcSysSwitchFabricUtil
Percentage of Switching Fabric utilization. Object is not support on VSP
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.21
rcSysRmonMemSize
Amount of RAM in bytes to allocate for RMON to use when rcSysRmonEnable is TRUE.
scalarInteger32.1.3.6.1.4.1.2272.1.1.22
rcSysRmonEnable
Control whether the RMON feature should be enabled. To enable the RMON feature, set this variable to true. The RMON agent in the device will get started immediately…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.23
rcSysRmonSaveConfig deprecated
Control whether RMON configuration information should be saved to NVRAM so RMON settings can be automatically reinstalled after a system reboot. Setting rcSysRmonSa…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.24
rcSysRmonTrapOption
Used to indicate whether RMON traps should be sent to only the owner of the RMON alarm (i.e., the manager that created the alarm entry) or all trap recipients in the system trap …
scalarEnumeration.1.3.6.1.4.1.2272.1.1.25
rcSysSupportRouting
Used to indicate whether routing is supported in this product.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.26
rcSysSupportWebServer
Used to indicate whether WebServer is supported in this product.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.27
rcSysLastIpAddrChange
Last management initiated IP address change since sysUpTime. Any addition or deletion of an IP address to a single routable port or a VLAN is time-stamped by this variable.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.28
rcSysCommReadWriteLayer3
When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-write access is granted to all Laye…
scalarOctetString.1.3.6.1.4.1.2272.1.1.29
rcSysBroadcast
This entity's broadcast address.
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.3
rcSysCommReadWriteLayer2
When an SNMP message is received by this entity, the community string in the message is compared with this string fourth. If it matches, read-write access is granted to all La…
scalarOctetString.1.3.6.1.4.1.2272.1.1.30
rcSysAccessPolicyEnable
Used to configure the system access policy feature. if 'true', the rcSysAccessPolicyTable is examined to determine which packets should be allowed or denied access to this device.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.31
rcSysDefaultRuntimeConfigFileName
default config.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.1.32
rcSysDefaultBootConfigFileName
default boot config.
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.1.33
rcSysConfigFileName
File name used in conjunction with rcSysAction. If rcSysAction is set to 'saveRuntimeConfig' or 'saveRuntimeConfigToSlave' then this file name will be used instead of t…
scalarOctetString.1.3.6.1.4.1.2272.1.1.34
rcSysLastRunTimeConfigSave
SysUpTime of the last time when the run time configuration was written to.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.35
rcSysLastRunTimeConfigSaveToSlave
SysUpTime of the last time when the run time configuration was written to slave NVRAM.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.36
rcSysLastBootConfigSave
SysUpTime of the last time when the boot configuration was written to.
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.37
rcSysRmonUtilizationMethod
Used to control whether RMON should use a half-duplex or full-duplex formula to calculate port utilization. When set to 'halfDuplex', RMON will use InOctets and the port's speed t…
scalarEnumeration.1.3.6.1.4.1.2272.1.1.39
rcSysCommReadWriteAll
When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it matches, read-write access is granted to all items …
scalarOctetString.1.3.6.1.4.1.2272.1.1.4
rcSysCommReadWriteLayer1
read-write L1 access
scalarOctetString.1.3.6.1.4.1.2272.1.1.40
rcSysOtherBufferUtil
bw currently consumed
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.41
rcSysOtherBufferUtilPeak
peak bw since reset
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.42
rcSysOtherBufferUtilPeakTime
timestamp for rcSysPeakBw
scalarSNMPv2-SMITimeTicks.1.3.6.1.4.1.2272.1.1.43
rcSysOtherCpuUtil
% cpu utilization
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.44
rcSysOtherSwitchFabricUtil
% switch fabric util
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.45
rcSysDramSize
Dram size in mega-bytes. It is not supported on VSP
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.46
rcSysDramUsed
Dram used in percentage. It is not supported on VSP
scalarSNMPv2-SMIGauge32.1.3.6.1.4.1.2272.1.1.47
rcSysDramFree
Dram free size in kilo-bytes. It is not supported on VSP
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.48
rcSysDramMaxBlockFree
Dram max block free size in kilo-bytes. it is not supported on VSP
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.49
rcSysCommReadWrite
When an SNMP message is received by this entity, the community string in the message is compared with this string second. If it matches, read-write access is granted to all items…
scalarOctetString.1.3.6.1.4.1.2272.1.1.5
rcSysVirtualIpAddr
Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address. Unlike the management IP address, this address…
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.51
rcSysVirtualNetMask
Net mask of the management virtual Ip address
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.52
rcSysReadWriteLevel
The status of the read/write level
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.53
rcSysMTUSize
This is the maximum transmission size of frames that all the ports on the chassis support. Note: MicroVSP (VSP1xxx) supports frame size 1950,1522,9022. Other platforms support fr…
scalarEnumeration.1.3.6.1.4.1.2272.1.1.55
rcSysClockSyncTime
Time interval at which RTC and system clocks are synchronized.Not supported in VSP 3.3
scalarInteger32.1.3.6.1.4.1.2272.1.1.56
rcSysForceTrapSender
This is a flag that if user wants to configured CLIP (Circuit Less IP) as trap originator.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.57
rcSysMrouteStrLimit
enable or disable mroute stream limit in system.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.58
rcSysCommReadOnly
When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-only access is granted to all items i…
scalarOctetString.1.3.6.1.4.1.2272.1.1.6
rcSysTrapRecvTable deprecated
The trap receiver table (0 to 25 entries). This table lists the addresses of Network Management Stations that should receive trap messages from this entity when an exception con…
table-.1.3.6.1.4.1.2272.1.1.60
rcSysAccessPolicyTable
Management access policy table. This table is used to permit or deny access to this device via the specified source Id.
table-.1.3.6.1.4.1.2272.1.1.61
rcSysTrapSenderTable
The trap sender table (0 to 25 entries). This table lists the addresses of Network Management Stations and the Source Address that should receive trap messages from this entity …
table-.1.3.6.1.4.1.2272.1.1.62
rcSysDnsServerListTableSize
Used to indicate the number of entries in the table.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.63
rcSysDnsServerListTable
DNS serever list table used to store the details of the DNS server configured.
table-.1.3.6.1.4.1.2272.1.1.64
rcSysDnsHostTable
DNS Host table.
table-.1.3.6.1.4.1.2272.1.1.65
rcSysMsgLogFrequency
Used to specify the maximum frequency/count of the occurence of the Log Message.
scalarInteger32.1.3.6.1.4.1.2272.1.1.66
rcSysMsgLogText
A textual string containing the first four characters of the Log Message.
scalarOctetString.1.3.6.1.4.1.2272.1.1.67
rcSysForceIpHdrSender
Flag to decide if IP header source address will be matched with SNMP header sender networks.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.68
rcSysVlanMaxId
The maximum vlan Id that supported
scalarEnumeration.1.3.6.1.4.1.2272.1.1.69
rcSysVersion
Software version running on device
scalarOctetString.1.3.6.1.4.1.2272.1.1.7
rcSysDnsDomainName
Default domain used for querying the DNS Server.
scalarOctetString.1.3.6.1.4.1.2272.1.1.70
rcSysDnsServerListIpAddr
DNS server's IP address
scalarSNMPv2-SMIIpAddress.1.3.6.1.4.1.2272.1.1.71
rcSysDnsRequestType
DNS Type: Whether it was Dns Request or a Response
scalarEnumeration.1.3.6.1.4.1.2272.1.1.72
rcSysSpanningTreeOperMode
This object indicates the current spanning-tree mode of the system. . The meaning of specific values is: nortelStpg(1) .. The older proprietary mode which supports multiple spann…
scalarEnumeration.1.3.6.1.4.1.2272.1.1.73
rcSysSpanningTreeAdminMode
This object indicates the desired spanning-tree mode of the system. The meaning of specific values is: nortelStpg(1) .. The older proprietary mode which supports multiple spannin…
scalarEnumeration.1.3.6.1.4.1.2272.1.1.74
rcSysAutoRecoverDelay
Time interval in seconds after which auto-recovery runs on ports to clear action taken by cp-limit, link flap or loop detect
scalarInteger32.1.3.6.1.4.1.2272.1.1.75
rcSysMacFlapLimitTime
Time limit in milliseconds for MAC flapping for loop-detect feature
scalarInteger32.1.3.6.1.4.1.2272.1.1.76
rcSysMacFlapLimitCount
Number of times mac flapping can happen for loop-detect feature
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.77
rcSysExtCplimitEnable
enable or disable extended CP-LIMIT in system.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.78
rcSysExtCplimitMinCongTime
Minimum time for which System octapid should be congested to trigger congestion algorithm for extended CP-LIMIT in mSecs
scalarInteger32.1.3.6.1.4.1.2272.1.1.79
rcSysAction deprecated
Initiate a system action.
scalarEnumeration.1.3.6.1.4.1.2272.1.1.8
rcSysExtCplimitMaxPorts
Maximum number of ports which need to be monitored for congestion in Extended CP-LIMIT
scalarInteger32.1.3.6.1.4.1.2272.1.1.80
rcSysExtCplimitPortCongTime
Minimum time for which ingress traffic utilization rate of a monitored port should stay more than the allowed limits in order to disable the port for extended CP-LIMIT in Secs
scalarInteger32.1.3.6.1.4.1.2272.1.1.81
rcSysExtCplimitTrapLevel
Indicates the trap level for extended CP-LIMIT
scalarEnumeration.1.3.6.1.4.1.2272.1.1.82
rcSysExtCplimitSysOctapidCongested
Indicates whether system octapid congestion detected for extended cp-limit
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.83
rcSysExtCplimitPortsMonitored
Indicates whether ports has been shutdown due to extended cp-limit
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.84
rcSysExtCplimitPortsShutDown
Indicates whether ports has been shutdown due to extended Cp-limit
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.1.85
rcSysActionL1
Initiate a system action for layer1 user
scalarEnumeration.1.3.6.1.4.1.2272.1.1.86
rcSysActionL2
Initiate a system action for layer2 user
scalarEnumeration.1.3.6.1.4.1.2272.1.1.87
rcSysActionL3
Initiate a system action for layer3 user
scalarEnumeration.1.3.6.1.4.1.2272.1.1.88
rcSysActionRwa
Initiate a system action.
scalarEnumeration.1.3.6.1.4.1.2272.1.1.89
rcSysResult
Result from the last system action.
scalarEnumeration.1.3.6.1.4.1.2272.1.1.9
rcSysPowerUsage
The current power usage for the whole chassis.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.90
rcSysPowerAvailable
The current power available for the whole chassis.
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.1.91
rcSysBpduStartMacAddress
Starting Multicast MAC address for BPDUs
scalarSNMPv2-TCMacAddress.1.3.6.1.4.1.2272.1.1.92
rcSysBpduMacAddressMask
BPDU MAC address Mask
scalarInteger32.1.3.6.1.4.1.2272.1.1.93
rcSysFrcMsgControlTable
Management Force-msg Control table. This table is used to specify the pattern for Force-msg Control
table-.1.3.6.1.4.1.2272.1.1.94
rcSysAccPolSnmpGrpTable
SNMP group list for access policy
table-.1.3.6.1.4.1.2272.1.1.95
rcSysVirtualIpv6Addr
Virtual IP is an IP address that owned and advertised only by the master CPU. So whichever CPU is master registers this IP address.
scalarIPV6-TCIpv6Address.1.3.6.1.4.1.2272.1.1.96
rcSysVirtualIpv6PrefixLength
The length of the virtual ipv6 addr prefix (in bits).
scalarInteger32.1.3.6.1.4.1.2272.1.1.97
rcSysConfigMode
This is used in conjunction with rcSysAction inorder to decide the mode in which the config file is going to be saved in.
scalarEnumeration.1.3.6.1.4.1.2272.1.1.98
rcSysExtendedPingBypassnode-.1.3.6.1.4.1.2272.1.1.99