rcIpv6NetToPhysicalRowStatus
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.62.1.1.7.1.9
Object
The status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified. The value of this object has no effect on
whether other objects in this conceptual row can be
modified.
A conceptual row can not be made active until the
rcIpv6NetToPhysicalPhysAddress object has been set.
Note that if the rcIpv6NetToPhysicalType is set to
'invalid' the
managed node may delete the entry independent of the state
of this object. Only createandGo and Delete operations are
supported
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.62.1.1.7.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpv6NetToPhysicalEntry
- Table
- rcIpv6NetToPhysicalTable
- Siblings
- 9
Values & Constraints
Object Constraints
range: 100-65535
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6NetToPhysicalIfIndex The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
i… | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.62.1.1.7.1.1 |
| rcIpv6NetToPhysicalBMac If the rcIpv6NetToPhysicalEntry is learned from a
SPBM network, instead of using port to track where the
rcIpv6NetToPhysicalNetAddress come from, the backbone
MAC address is us… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.62.1.1.7.1.10 |
| rcIpv6NetToPhysicalCvid Used to identify customer vid of the switched uni port
of this entry is associated with. 4095 is not used. 4096
is reserved for untagged case. | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.7.1.11 |
| rcIpv6NetToPhysicalNetAddress The IP Address corresponding to the media-dependent
`physical' address. The address type of this object is
specified in rcIpv6NetToPhysicalAddressType.
… | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2272.1.62.1.1.7.1.2 |
| rcIpv6NetToPhysicalPhysAddress The media-dependent `physical' address.
As the entries in this table are typically not persistent
when this object is written the entity SHOULD NOT save the
change … | column | OctetString | .1.3.6.1.4.1.2272.1.62.1.1.7.1.3 |
| rcIpv6NetToPhysicalInterface The field represents either a physical port id or the MLT
port id. This entry is associated either with
a port or with a MLT in a VLAN/Brouter port. If the value is
0 then the in… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.62.1.1.7.1.4 |
| rcIpv6NetToPhysicalLastUpdated The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then thi… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2272.1.62.1.1.7.1.5 |
| rcIpv6NetToPhysicalType The type of mapping.
The 'dynamic(2)' type indicates that the IP address to
physical addresses mapping has been dynamically resolved
using e.g. IPv4 ARP or the IPv6… | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.7.1.6 |
| rcIpv6NetToPhysicalState The Neighbor Unreachability Detection [4] state for the
interface when the address mapping in this entry is used.
If Neighbor Unreachability Detection is not in use (eg. for
IPv4)… | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.7.1.8 |