rcIpv6NetToPhysicalInterface
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.62.1.1.7.1.4
Object
The field represents either a physical port id or the MLT port id. This entry is associated either with a port or with a MLT in a VLAN/Brouter port. If the value is 0 then the interface is CP port.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.62.1.1.7.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpv6NetToPhysicalEntry
- Table
- rcIpv6NetToPhysicalTable
- Siblings
- 9
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6NetToPhysicalIfIndex The index value which uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
i… | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.62.1.1.7.1.1 |
| rcIpv6NetToPhysicalBMac If the rcIpv6NetToPhysicalEntry is learned from a
SPBM network, instead of using port to track where the
rcIpv6NetToPhysicalNetAddress come from, the backbone
MAC address is us… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.62.1.1.7.1.10 |
| rcIpv6NetToPhysicalCvid Used to identify customer vid of the switched uni port
of this entry is associated with. 4095 is not used. 4096
is reserved for untagged case. | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.7.1.11 |
| rcIpv6NetToPhysicalNetAddress The IP Address corresponding to the media-dependent
`physical' address. The address type of this object is
specified in rcIpv6NetToPhysicalAddressType.
… | column | IPV6-TCIpv6Address | .1.3.6.1.4.1.2272.1.62.1.1.7.1.2 |
| rcIpv6NetToPhysicalPhysAddress The media-dependent `physical' address.
As the entries in this table are typically not persistent
when this object is written the entity SHOULD NOT save the
change … | column | OctetString | .1.3.6.1.4.1.2272.1.62.1.1.7.1.3 |
| rcIpv6NetToPhysicalLastUpdated The value of sysUpTime at the time this entry was last
updated. If this entry was updated prior to the last re-
initialization of the local network management subsystem,
then thi… | column | SNMPv2-TCTimeStamp | .1.3.6.1.4.1.2272.1.62.1.1.7.1.5 |
| rcIpv6NetToPhysicalType The type of mapping.
The 'dynamic(2)' type indicates that the IP address to
physical addresses mapping has been dynamically resolved
using e.g. IPv4 ARP or the IPv6… | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.7.1.6 |
| rcIpv6NetToPhysicalState The Neighbor Unreachability Detection [4] state for the
interface when the address mapping in this entry is used.
If Neighbor Unreachability Detection is not in use (eg. for
IPv4)… | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.7.1.8 |
| rcIpv6NetToPhysicalRowStatus The status of this conceptual row.
The RowStatus TC requires that this DESCRIPTION clause
states under which circumstances other objects in this row
can be modified… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.62.1.1.7.1.9 |