rcIpv6InterfaceReasmMaxSize
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.62.1.1.2.1.7
Object
column
r/w
Integer32
MTU for this IPv6 interface, this value should be same for all the ip addresses defined on this interface. In VSP9000, Supported range for IO interface, supported range is(1280..1500 | 1850 | 9500). For Mgmt interface, Supporyed Range is (1280..1500)
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.62.1.1.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcIpv6InterfaceEntry
- Table
- rcIpv6InterfaceTable
- Siblings
- 28
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcIpv6InterfaceIfIndex An unique value to identify a physical interface
or a logical interface (VLAN).
For the brouter port it is the ifindex of the
port and in the case of the vlan it is the
ifindex of… | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.62.1.1.2.1.1 |
| rcIpv6InterfaceOperStatus Operating status of the interface. | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.2.1.10 |
| rcIpv6InterfaceReachableTime The time (in milliseconds) a neighbor is considered
reachable after receiving a reachability confirmation.
REFERENCE RFC2461, Section 6.3.2 | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.2.1.11 |
| rcIpv6InterfaceRetransmitTime deprecated Deprecated. Use rcIpv6InterfaceRetransmitTimer instead. | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.2.1.12 |
| rcIpv6InterfaceMulticastAdminStatus This indicates the admin status for multicast
for this interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.13 |
| rcIpv6InterfaceRowStatus Row status for create/delete. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.62.1.1.2.1.14 |
| rcIpv6InterfaceDhcpEnabled Enable or disable DHCP on the specified
interface. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.15 |
| rcIpv6InterfaceMacOffset Used to request a particular MAC for an IPv6 VLAN.
The system has 1536 mac addresses, last 4 are
reserved for MG.
One can either mention a mac offset while
configuring IPv6 on … | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.2.1.16 |
| rcIpv6InterfaceRetransmitTimer The time (in milliseconds) between retransmissions of
Neighbor Solicitation messages to a neighbor when
resolving the address or when probing the reachability
of a neighbor. REFER… | column | Unsigned32 | .1.3.6.1.4.1.2272.1.62.1.1.2.1.17 |
| rcIpv6InterfaceCurHopLimit The default value to be placed in the current hop limit
field in router advertisements sent from this interface.
The value should be set to the current diameter of the
Internet.
… | column | Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.2.1.18 |
| rcIpv6InterfaceIdentifier IPv6 address
interface identifiers. This is a binary string
of up to 8 octets in network byte-order. | column | IPV6-TCIpv6AddressIfIdentifier | .1.3.6.1.4.1.2272.1.62.1.1.2.1.2 |
| rcIpv6InterfaceClearIcmpStats Clear ICMP statistics for an interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.20 |
| rcIpv6InterfaceClearGeneralStats Clear general statistics for an interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.21 |
| rcIpv6InterfaceClearNeighborCache Clear Neighbor Cache for an interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.22 |
| rcIpv6InterfaceClearDestinationCache Clear Destination Cache for an interface | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.23 |
| rcIpv6InterfaceReversePathCheckEnable Used to indicate whether this interface should
perform Reverse Path Check | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.24 |
| rcIpv6InterfaceReversePathCheckMode Reverse Path Checking mode. | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.2.1.25 |
| rcIpv6InterfaceForwardingEnabled Used to indicate whether this interface should
perform forwarding | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.26 |
| rcIpv6InterfaceRsmltEnable Used to indicate whether this interface has
rsmlt enabled or not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.27 |
| rcIpv6InterfaceBfdEnable Used to indicate whether this interface has
BFD enabled or not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.28 |
| rcIpv6InterfaceProcessRedirect Used to indicate whether this interface has
ProcessRedirect enabled or not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.29 |
| rcIpv6InterfaceIdentifierLength The length of the Interface Identifier in bits. | column | bits Integer32 | .1.3.6.1.4.1.2272.1.62.1.1.2.1.3 |
| rcIpv6InterfaceIpsecEnable Used to indicate whether this interface has
Ipsec enabled or not | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.30 |
| rcIpv6InterfaceDescr A textual string containing information about the
interface. This string may be set by network management system. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.62.1.1.2.1.4 |
| rcIpv6InterfaceVlanId A value that uniquely identifies the Virtual LAN
associated with this entry. This value corresponds
to the lower 12 bits in the IEEE 802.1Q VLAN Tag. | column | RcVlanIdOrNone | .1.3.6.1.4.1.2272.1.62.1.1.2.1.5 |
| rcIpv6InterfaceType The interface type. | column | Enumeration | .1.3.6.1.4.1.2272.1.62.1.1.2.1.6 |
| rcIpv6InterfacePhysAddress The media-dependent `physical' address, for the
ethernet media it is the MAC address | column | SNMPv2-TCPhysAddress | .1.3.6.1.4.1.2272.1.62.1.1.2.1.8 |
| rcIpv6InterfaceAdminStatus The indication of whether IPv6 is enabled (up)
or disabled (down) on this interface. This object does not
affect the state of the interface itself, only its
connection to an IPv6 … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.62.1.1.2.1.9 |