rcIpv6InterfaceReachableTime

RAPID-CITY · .1.3.6.1.4.1.2272.1.62.1.1.2.1.11
MIB view Table view

Object

column r/w Integer32 
The time (in milliseconds) a neighbor is considered
reachable after receiving a reachability confirmation.
REFERENCE  RFC2461, Section 6.3.2

Context

MIB
RAPID-CITY
OID
.1.3.6.1.4.1.2272.1.62.1.1.2.1.11
Type
column
Access
readwrite
Status
current
Parent
rcIpv6InterfaceEntry
Table
rcIpv6InterfaceTable
Siblings
28

Syntax

Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcIpv6InterfaceIfIndex
An unique value to identify a physical interface or a logical interface (VLAN). For the brouter port it is the ifindex of the port and in the case of the vlan it is the ifindex of…
columnInterfaceIndex.1.3.6.1.4.1.2272.1.62.1.1.2.1.1
rcIpv6InterfaceOperStatus
Operating status of the interface.
columnEnumeration.1.3.6.1.4.1.2272.1.62.1.1.2.1.10
rcIpv6InterfaceRetransmitTime deprecated
Deprecated. Use rcIpv6InterfaceRetransmitTimer instead.
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.2.1.12
rcIpv6InterfaceMulticastAdminStatus
This indicates the admin status for multicast for this interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.13
rcIpv6InterfaceRowStatus
Row status for create/delete.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2272.1.62.1.1.2.1.14
rcIpv6InterfaceDhcpEnabled
Enable or disable DHCP on the specified interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.15
rcIpv6InterfaceMacOffset
Used to request a particular MAC for an IPv6 VLAN. The system has 1536 mac addresses, last 4 are reserved for MG. One can either mention a mac offset while configuring IPv6 on …
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.2.1.16
rcIpv6InterfaceRetransmitTimer
The time (in milliseconds) between retransmissions of Neighbor Solicitation messages to a neighbor when resolving the address or when probing the reachability of a neighbor. REFER…
columnUnsigned32.1.3.6.1.4.1.2272.1.62.1.1.2.1.17
rcIpv6InterfaceCurHopLimit
The default value to be placed in the current hop limit field in router advertisements sent from this interface. The value should be set to the current diameter of the Internet. …
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.2.1.18
rcIpv6InterfaceIdentifier
IPv6 address interface identifiers. This is a binary string of up to 8 octets in network byte-order.
columnIPV6-TCIpv6AddressIfIdentifier.1.3.6.1.4.1.2272.1.62.1.1.2.1.2
rcIpv6InterfaceClearIcmpStats
Clear ICMP statistics for an interface
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.20
rcIpv6InterfaceClearGeneralStats
Clear general statistics for an interface
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.21
rcIpv6InterfaceClearNeighborCache
Clear Neighbor Cache for an interface
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.22
rcIpv6InterfaceClearDestinationCache
Clear Destination Cache for an interface
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.23
rcIpv6InterfaceReversePathCheckEnable
Used to indicate whether this interface should perform Reverse Path Check
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.24
rcIpv6InterfaceReversePathCheckMode
Reverse Path Checking mode.
columnEnumeration.1.3.6.1.4.1.2272.1.62.1.1.2.1.25
rcIpv6InterfaceForwardingEnabled
Used to indicate whether this interface should perform forwarding
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.26
rcIpv6InterfaceRsmltEnable
Used to indicate whether this interface has rsmlt enabled or not
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.27
rcIpv6InterfaceBfdEnable
Used to indicate whether this interface has BFD enabled or not
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.28
rcIpv6InterfaceProcessRedirect
Used to indicate whether this interface has ProcessRedirect enabled or not
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.29
rcIpv6InterfaceIdentifierLength
The length of the Interface Identifier in bits.
columnbits Integer32.1.3.6.1.4.1.2272.1.62.1.1.2.1.3
rcIpv6InterfaceIpsecEnable
Used to indicate whether this interface has Ipsec enabled or not
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.30
rcIpv6InterfaceDescr
A textual string containing information about the interface. This string may be set by network management system.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.62.1.1.2.1.4
rcIpv6InterfaceVlanId
A value that uniquely identifies the Virtual LAN associated with this entry. This value corresponds to the lower 12 bits in the IEEE 802.1Q VLAN Tag.
columnRcVlanIdOrNone.1.3.6.1.4.1.2272.1.62.1.1.2.1.5
rcIpv6InterfaceType
The interface type.
columnEnumeration.1.3.6.1.4.1.2272.1.62.1.1.2.1.6
rcIpv6InterfaceReasmMaxSize
MTU for this IPv6 interface, this value should be same for all the ip addresses defined on this interface. In VSP9000, Supported range for IO interface, supported range is(1280.…
columnInteger32.1.3.6.1.4.1.2272.1.62.1.1.2.1.7
rcIpv6InterfacePhysAddress
The media-dependent `physical' address, for the ethernet media it is the MAC address
columnSNMPv2-TCPhysAddress.1.3.6.1.4.1.2272.1.62.1.1.2.1.8
rcIpv6InterfaceAdminStatus
The indication of whether IPv6 is enabled (up) or disabled (down) on this interface. This object does not affect the state of the interface itself, only its connection to an IPv6 …
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.62.1.1.2.1.9
Indexes
ObjectTypeSyntaxOID
rcIpv6NetToPhysicalIfIndex
The index value which uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as i…
columnInterfaceIndex.1.3.6.1.4.1.2272.1.62.1.1.7.1.1
rcIpv6NetToPhysicalNetAddress
The IP Address corresponding to the media-dependent `physical' address. The address type of this object is specified in rcIpv6NetToPhysicalAddressType. …
columnIPV6-TCIpv6Address.1.3.6.1.4.1.2272.1.62.1.1.7.1.2