rcDiagPcapStatNumberOfPacketsReceived
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.23.15.17
Object
scalar
SNMPv2-TCDisplayString
Number of packets received in PCAP engine
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.23.15.17- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- rcDiagPcap
- Siblings
- 21
Values & Constraints
Enumerated Values
0 | restart |
1 | systemRegistrationDone |
2 | tableSynchronizationDone |
3 | versionIncompatible |
4 | noEvent |
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcDiagPcapEnable To enable pcap in secondary CPU | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.1 |
| rcDiagPcapFilterTableSize Used to indicate the number of entries in the
Filter table | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.23.15.10 |
| rcDiagPcapFilterTable A table used to store pcap secondary filters | table | - | .1.3.6.1.4.1.2272.1.23.15.11 |
| rcDiagPcapAdvancedFilterTableSize Used to indicate the number of entries in the
Filter table advanced parameter | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.23.15.12 |
| rcDiagPcapAdvancedFilterTable A table used to store pcap secondary filters | table | - | .1.3.6.1.4.1.2272.1.23.15.13 |
| rcDiagPcapCopyFileName Used to indicate the file name. When set, the PCAP
data from PCAP engine RAM is stored into this file
in PCAP engine | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.23.15.14 |
| rcDiagPcapResetStat To Reset PCAP statistics | scalar | Enumeration | .1.3.6.1.4.1.2272.1.23.15.15 |
| rcDiagPcapStatPacketCapacityCount Packet Capacity Count | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.23.15.16 |
| rcDiagPcapStatNumberOfPacketsAccumulated Number of packets captured in PCAP engine | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.23.15.18 |
| rcDiagPcapStatNumberOfPacketsDroppedInPcapEngine Number of packets dropped in PCAP engine by filters | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.23.15.19 |
| rcDiagPcapBufferWrap To enable buffer wrap-around when buffer is full.
If set, pcap will continue to capture pkts, otherwise
stops pkt storing | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.2 |
| rcDiagPcapStatNumberOfPacketsDroppedInHardware Number of packets dropped in Hardware | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2272.1.23.15.20 |
| rcDiagPcapDataValid A true/false value that indicate the return
data whether is valid. | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.21 |
| rcDiagPcapEtherTypeForSvlanLevel EtherType of svlan level. | scalar | Integer32 | .1.3.6.1.4.1.2272.1.23.15.22 |
| rcDiagPcapPcmciaWrap To wrap around the PCMCIA when saving data in PCMCIA.
In Vsp,the name has been changed to wrap-auto-save-file.
When this parameter is true it overwrites the file present on extfla… | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.3 |
| rcDiagPcapFrameSize Number of bytes of pkts needs to be stored | scalar | Integer32 | .1.3.6.1.4.1.2272.1.23.15.4 |
| rcDiagPcapBufferSize memory to be allocated for capturing the pkt | scalar | Integer32 | .1.3.6.1.4.1.2272.1.23.15.5 |
| rcDiagPcapAutoSave To save data automatically when buffer is full | scalar | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.15.6 |
| rcDiagPcapAutoSaveFileName Name of the file in which the pkt is to be stored | scalar | OctetString | .1.3.6.1.4.1.2272.1.23.15.7 |
| rcDiagPcapAutoSaveDevice Where to store the captured pkts. If the option is
network, the user need to enter an IP address also | scalar | Enumeration | .1.3.6.1.4.1.2272.1.23.15.8 |
| rcDiagPcapAutoSaveNetworkIpAddress ip address of the remote host where the data
needs to be stored. This field is valid only
if the device is network | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.23.15.9 |