rcDiagPcapAutoSaveNetworkIpAddress

RAPID-CITY · .1.3.6.1.4.1.2272.1.23.15.9
MIB view Table view

Object

scalar r/w SNMPv2-SMIIpAddress 
ip address of the remote host where the data
needs to be stored. This field is valid only
if the device is network

Context

MIB
RAPID-CITY
OID
.1.3.6.1.4.1.2272.1.23.15.9
Type
scalar
Access
readwrite
Status
current
Parent
rcDiagPcap
Siblings
21

Syntax

SNMPv2-SMIIpAddress
Source
SNMPv2-SMIIpAddress
Base type
OctetString

Values & Constraints

Object Constraints
range: 1-31
Type Constraints
range: 4

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcDiagPcapEnable
To enable pcap in secondary CPU
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.23.15.1
rcDiagPcapFilterTableSize
Used to indicate the number of entries in the Filter table
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.23.15.10
rcDiagPcapFilterTable
A table used to store pcap secondary filters
table-.1.3.6.1.4.1.2272.1.23.15.11
rcDiagPcapAdvancedFilterTableSize
Used to indicate the number of entries in the Filter table advanced parameter
scalarSNMPv2-SMIInteger32.1.3.6.1.4.1.2272.1.23.15.12
rcDiagPcapAdvancedFilterTable
A table used to store pcap secondary filters
table-.1.3.6.1.4.1.2272.1.23.15.13
rcDiagPcapCopyFileName
Used to indicate the file name. When set, the PCAP data from PCAP engine RAM is stored into this file in PCAP engine
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.23.15.14
rcDiagPcapResetStat
To Reset PCAP statistics
scalarEnumeration.1.3.6.1.4.1.2272.1.23.15.15
rcDiagPcapStatPacketCapacityCount
Packet Capacity Count
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.23.15.16
rcDiagPcapStatNumberOfPacketsReceived
Number of packets received in PCAP engine
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.23.15.17
rcDiagPcapStatNumberOfPacketsAccumulated
Number of packets captured in PCAP engine
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.23.15.18
rcDiagPcapStatNumberOfPacketsDroppedInPcapEngine
Number of packets dropped in PCAP engine by filters
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.23.15.19
rcDiagPcapBufferWrap
To enable buffer wrap-around when buffer is full. If set, pcap will continue to capture pkts, otherwise stops pkt storing
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.23.15.2
rcDiagPcapStatNumberOfPacketsDroppedInHardware
Number of packets dropped in Hardware
scalarSNMPv2-TCDisplayString.1.3.6.1.4.1.2272.1.23.15.20
rcDiagPcapDataValid
A true/false value that indicate the return data whether is valid.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.23.15.21
rcDiagPcapEtherTypeForSvlanLevel
EtherType of svlan level.
scalarInteger32.1.3.6.1.4.1.2272.1.23.15.22
rcDiagPcapPcmciaWrap
To wrap around the PCMCIA when saving data in PCMCIA. In Vsp,the name has been changed to wrap-auto-save-file. When this parameter is true it overwrites the file present on extfla…
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.23.15.3
rcDiagPcapFrameSize
Number of bytes of pkts needs to be stored
scalarInteger32.1.3.6.1.4.1.2272.1.23.15.4
rcDiagPcapBufferSize
memory to be allocated for capturing the pkt
scalarInteger32.1.3.6.1.4.1.2272.1.23.15.5
rcDiagPcapAutoSave
To save data automatically when buffer is full
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.23.15.6
rcDiagPcapAutoSaveFileName
Name of the file in which the pkt is to be stored
scalarOctetString.1.3.6.1.4.1.2272.1.23.15.7
rcDiagPcapAutoSaveDevice
Where to store the captured pkts. If the option is network, the user need to enter an IP address also
scalarEnumeration.1.3.6.1.4.1.2272.1.23.15.8