rcDiagMirrorMonitoringIsidOffset
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.23.1.1.21
Object
column
r/w
Integer32
Used to configure the monitoring ISID offset value. The offset id value is mapped to actual monitor I-SID value in which packets are mirrored to.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.23.1.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcDiagMirrorByPortEntry
- Table
- rcDiagMirrorByPortTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-63
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcDiagMirrorByPortId Entry id. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.1 |
| rcDiagMirrorByPortSpEncap disable/enable service provide encapsulation. If this
attribute is true the mirrored packets contains the service provider
encapsulation, OEL2 and Mac-in-Mac encapsulation are sup… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.1.1.10 |
| rcDiagMirrorByPortGranularity Used to configure the 'granularity' of the mirror
operation physicalPort means all traffic ingressing or egressing out of
the mirrored port shall be copied to the mirroring port.
… | column | Enumeration | .1.3.6.1.4.1.2272.1.23.1.1.11 |
| rcDiagMirrorByPortMirroredPortList Used to configure the 'mirrored' port. The port
where packets are copied from. | column | PortSet | .1.3.6.1.4.1.2272.1.23.1.1.12 |
| rcDiagMirrorByPortMirroringPortList Used to configure the 'mirroring' port. The port
where packets are copied from. | column | PortSet | .1.3.6.1.4.1.2272.1.23.1.1.13 |
| rcDiagMirrorMirroringVlanId Destination is a VLAN. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.14 |
| rcDiagMirrorMirroringMltId Destination is an MLT. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.15 |
| rcDiagMirrorMirroringMgId Contains information about the MGID allocated. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.16 |
| rcDiagMirrorMirroringIpAddr Destination IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.23.1.1.17 |
| rcDiagMirrorMirroringIpTtl Ttl value for the mirrored packet when mirror
destination is IP. If other than default,
the encapsulated packet will have the given ttl. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.18 |
| rcDiagMirrorMirroringIpDscp Dscp value for mirrored packets when mirror
destination is IP. If other than default,
the encapsulated packet will have the given
Dscp value. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.19 |
| rcDiagMirrorByPortMirroredPort deprecated Used to configure the 'mirrored' port. The port
where packets are copied from. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.23.1.1.2 |
| rcDiagMirrorByPortScope Used to configure the port mirroring scope.
Chassis is the default option which allows
mirroring among ports from different slots.
Slice option requires both mirroring and
mirrore… | column | Enumeration | .1.3.6.1.4.1.2272.1.23.1.1.20 |
| rcDiagMirrorMonitoringIsid Actual monitor I-SID value in which packets are mirrored to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.23.1.1.22 |
| rcDiagMirrorMirroringQos Used to define the Quality of Service (QoS) profiles for
the mirrored packet into monitoring ISID. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.23 |
| rcDiagMirrorByPortMirroringPort deprecated Used to configure the 'mirroring' port. The port
where packets are copied to. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.23.1.1.3 |
| rcDiagMirrorByPortMode Used to configure the 'mode' of the mirror operation.
'tx' means packets being transmitted on the 'mirrored'
port will be copied. 'rx' means packets received on
the 'mirrored' po… | column | Enumeration | .1.3.6.1.4.1.2272.1.23.1.1.4 |
| rcDiagMirrorByPortEnable Used to enable/disable this entry. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.1.1.5 |
| rcDiagMirrorByPortRowStatus Row status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.23.1.1.6 |
| rcDiagMirrorByPortOctapidId obsolete Octapid Id for a port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.23.1.1.7 |
| rcDiagMirrorByPortPid Pid for a port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.23.1.1.8 |
| rcDiagMirrorRemoteMirrorVlanId vlan-id to which mirrored packets needs to
be send for remote mirroring. If set, this
vlan id is used in mirror tag of the remote
mirrored packet | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.9 |