rcDiagMirrorByPortMode
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.23.1.1.4
Object
column
r/w
Enumeration
Used to configure the 'mode' of the mirror operation. 'tx' means packets being transmitted on the 'mirrored' port will be copied. 'rx' means packets received on the 'mirrored' port will be copied. 'both' means all traffic on the 'mirrored' port will be copied. 'rxFilter' means packets received on the 'mirrored' port is copied only if it macthes filter criteria. 'txFilter' means packets being transmitted on the 'mirrorred' port is copied only if it matches filter criteria. 'bothFilter' means both ingress and egress traffic will be copied if it matches either ingress or egress filter on the 'mirrored' port.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.23.1.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcDiagMirrorByPortEntry
- Table
- rcDiagMirrorByPortTable
- Siblings
- 22
Syntax
Enumeration
Values & Constraints
Object Constraints
range: 0-4092
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcDiagMirrorByPortId Entry id. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.1 |
| rcDiagMirrorByPortSpEncap disable/enable service provide encapsulation. If this
attribute is true the mirrored packets contains the service provider
encapsulation, OEL2 and Mac-in-Mac encapsulation are sup… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.1.1.10 |
| rcDiagMirrorByPortGranularity Used to configure the 'granularity' of the mirror
operation physicalPort means all traffic ingressing or egressing out of
the mirrored port shall be copied to the mirroring port.
… | column | Enumeration | .1.3.6.1.4.1.2272.1.23.1.1.11 |
| rcDiagMirrorByPortMirroredPortList Used to configure the 'mirrored' port. The port
where packets are copied from. | column | PortSet | .1.3.6.1.4.1.2272.1.23.1.1.12 |
| rcDiagMirrorByPortMirroringPortList Used to configure the 'mirroring' port. The port
where packets are copied from. | column | PortSet | .1.3.6.1.4.1.2272.1.23.1.1.13 |
| rcDiagMirrorMirroringVlanId Destination is a VLAN. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.14 |
| rcDiagMirrorMirroringMltId Destination is an MLT. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.15 |
| rcDiagMirrorMirroringMgId Contains information about the MGID allocated. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.16 |
| rcDiagMirrorMirroringIpAddr Destination IP address. | column | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.2272.1.23.1.1.17 |
| rcDiagMirrorMirroringIpTtl Ttl value for the mirrored packet when mirror
destination is IP. If other than default,
the encapsulated packet will have the given ttl. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.18 |
| rcDiagMirrorMirroringIpDscp Dscp value for mirrored packets when mirror
destination is IP. If other than default,
the encapsulated packet will have the given
Dscp value. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.19 |
| rcDiagMirrorByPortMirroredPort deprecated Used to configure the 'mirrored' port. The port
where packets are copied from. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.23.1.1.2 |
| rcDiagMirrorByPortScope Used to configure the port mirroring scope.
Chassis is the default option which allows
mirroring among ports from different slots.
Slice option requires both mirroring and
mirrore… | column | Enumeration | .1.3.6.1.4.1.2272.1.23.1.1.20 |
| rcDiagMirrorMonitoringIsidOffset Used to configure the monitoring ISID offset value.
The offset id value is mapped to actual monitor I-SID value
in which packets are mirrored to. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.21 |
| rcDiagMirrorMonitoringIsid Actual monitor I-SID value in which packets are mirrored to. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.23.1.1.22 |
| rcDiagMirrorMirroringQos Used to define the Quality of Service (QoS) profiles for
the mirrored packet into monitoring ISID. | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.23 |
| rcDiagMirrorByPortMirroringPort deprecated Used to configure the 'mirroring' port. The port
where packets are copied to. | column | InterfaceIndex | .1.3.6.1.4.1.2272.1.23.1.1.3 |
| rcDiagMirrorByPortEnable Used to enable/disable this entry. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.23.1.1.5 |
| rcDiagMirrorByPortRowStatus Row status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2272.1.23.1.1.6 |
| rcDiagMirrorByPortOctapidId obsolete Octapid Id for a port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.23.1.1.7 |
| rcDiagMirrorByPortPid Pid for a port. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.23.1.1.8 |
| rcDiagMirrorRemoteMirrorVlanId vlan-id to which mirrored packets needs to
be send for remote mirroring. If set, this
vlan id is used in mirror tag of the remote
mirrored packet | column | Integer32 | .1.3.6.1.4.1.2272.1.23.1.1.9 |