rcCfmTransmitLbmStatus
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.69.17.1.15
Object
column
r/w
Enumeration
Status of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to transmit,
the Loopback messages.
-abort The service is aborted or about to abort the Loopback messages.
This column will also be used to avoid concurrency or
race condition problems that could occur if two or
more management entities try to
use the service at the same time.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.69.17.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcCfmTransmitLbmEntry
- Table
- rcCfmTransmitLbmTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcCfmTransmitLbmDomainIndex Maintenance Domain Name | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.1 |
| rcCfmTransmitLbmVlanPriority Priority. 3 bit value to be used in the VLAN tsg, if present in
the transmitted frame. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.11 |
| rcCfmTransmitLbmVlanDropEnable Drop Enable bit value to be used in the VLAN tag, if present in
the transmitted frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.69.17.1.12 |
| rcCfmTransmitLbmSeqNumber The transaction identifier/sequence number of the first loopback
message (to be) sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.69.17.1.13 |
| rcCfmTransmitLbmResultOk Indicates the result of the operation:
-true. The Loopback Message(s) will be (or have been) sent.
-false. The Loopback Message(s) will not be sent. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.69.17.1.14 |
| rcCfmTransmitLbmResult Display the LBM result. | column | OctetString | .1.3.6.1.4.1.2272.1.69.17.1.16 |
| rcCfmTransmitLbmMode Modes of the transmit loopback service:
throughput: The throughput mode of operation.
LBM Frame will be sent out at the configured transmit
interval rate for the… | column | Enumeration | .1.3.6.1.4.1.2272.1.69.17.1.17 |
| rcCfmTransmitLbmTimeoutInt The interval to wait for an LBM time-out with a
range of (1..10) seconds with a default value of 3
seconds. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.18 |
| rcCfmTransmitLbmInterFrameInt The interval between LBM frames with a range of
(0..1000) msecs with a default value of 500 msecs.
The value of 0 msecs indicates to send the frames as
fast as possible. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.19 |
| rcCfmTransmitLbmAssociationIndex Maintenance Association Name | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.2 |
| rcCfmTransmitLbmTestPattern The test pattern to use in the LBM PDU with range of
values namely allZero, allZeroCrc,
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
and with a default value of allZe… | column | Enumeration | .1.3.6.1.4.1.2272.1.69.17.1.20 |
| rcCfmTransmitLbmDataSize An arbitrary amount of data to be included in the data TLV, if the
Data Size is selected to be sent. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.21 |
| rcCfmTransmitLbmFrameSize If the frame size is specified then the data size shall
be internally calculated and the calculated data size
shall be included in the data TLV. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.22 |
| rcCfmTransmitLbmSourceMode Source modes of the transmit loopback service. | column | Enumeration | .1.3.6.1.4.1.2272.1.69.17.1.23 |
| rcCfmTransmitLbmIndex Maintenance EndPoint Index | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.3 |
| rcCfmTransmitLbmDomainName Maintenance Domain Name | column | OctetString | .1.3.6.1.4.1.2272.1.69.17.1.4 |
| rcCfmTransmitLbmAssociationName Maintenance Association Name | column | OctetString | .1.3.6.1.4.1.2272.1.69.17.1.5 |
| rcCfmTransmitLbmDestMacAddress An indication of the target MAC Address Field to
be transmitted, either:
A unicast destination MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.69.17.1.6 |
| rcCfmTransmitLbmDestMepId An indication of the target MAC Address Field to
be transmitted, either:
The Maintenance Assiciation End Point identifier of
another MEP in the same Maintenance Association | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.7 |
| rcCfmTransmitLbmDestIsMepId True indicates that MepId of the target MEP is used
for Loopback transmission.
False indicates that unicast destination MAC address
of the target MEP is used for Loopback transmi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.69.17.1.8 |
| rcCfmTransmitLbmMessages The number of loopback messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.9 |