rcCfmTransmitLbmDataSize
RAPID-CITY ·
.1.3.6.1.4.1.2272.1.69.17.1.21
Object
column
r/w
Integer32
An arbitrary amount of data to be included in the data TLV, if the Data Size is selected to be sent.
Context
- MIB
- RAPID-CITY
- OID
.1.3.6.1.4.1.2272.1.69.17.1.21- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- rcCfmTransmitLbmEntry
- Table
- rcCfmTransmitLbmTable
- Siblings
- 21
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| rcCfmTransmitLbmDomainIndex Maintenance Domain Name | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.1 |
| rcCfmTransmitLbmVlanPriority Priority. 3 bit value to be used in the VLAN tsg, if present in
the transmitted frame. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.11 |
| rcCfmTransmitLbmVlanDropEnable Drop Enable bit value to be used in the VLAN tag, if present in
the transmitted frame. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.69.17.1.12 |
| rcCfmTransmitLbmSeqNumber The transaction identifier/sequence number of the first loopback
message (to be) sent. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2272.1.69.17.1.13 |
| rcCfmTransmitLbmResultOk Indicates the result of the operation:
-true. The Loopback Message(s) will be (or have been) sent.
-false. The Loopback Message(s) will not be sent. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.69.17.1.14 |
| rcCfmTransmitLbmStatus Status of the transmit loopback service:
-ready. The service is available.
-transmit. The service is transmitting, or about to transmit,
the Loopback messages.
-abor… | column | Enumeration | .1.3.6.1.4.1.2272.1.69.17.1.15 |
| rcCfmTransmitLbmResult Display the LBM result. | column | OctetString | .1.3.6.1.4.1.2272.1.69.17.1.16 |
| rcCfmTransmitLbmMode Modes of the transmit loopback service:
throughput: The throughput mode of operation.
LBM Frame will be sent out at the configured transmit
interval rate for the… | column | Enumeration | .1.3.6.1.4.1.2272.1.69.17.1.17 |
| rcCfmTransmitLbmTimeoutInt The interval to wait for an LBM time-out with a
range of (1..10) seconds with a default value of 3
seconds. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.18 |
| rcCfmTransmitLbmInterFrameInt The interval between LBM frames with a range of
(0..1000) msecs with a default value of 500 msecs.
The value of 0 msecs indicates to send the frames as
fast as possible. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.19 |
| rcCfmTransmitLbmAssociationIndex Maintenance Association Name | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.2 |
| rcCfmTransmitLbmTestPattern The test pattern to use in the LBM PDU with range of
values namely allZero, allZeroCrc,
pseudoRandomBitSequence and pseudoRandomBitSequenceCrc
and with a default value of allZe… | column | Enumeration | .1.3.6.1.4.1.2272.1.69.17.1.20 |
| rcCfmTransmitLbmFrameSize If the frame size is specified then the data size shall
be internally calculated and the calculated data size
shall be included in the data TLV. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.22 |
| rcCfmTransmitLbmSourceMode Source modes of the transmit loopback service. | column | Enumeration | .1.3.6.1.4.1.2272.1.69.17.1.23 |
| rcCfmTransmitLbmIndex Maintenance EndPoint Index | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.3 |
| rcCfmTransmitLbmDomainName Maintenance Domain Name | column | OctetString | .1.3.6.1.4.1.2272.1.69.17.1.4 |
| rcCfmTransmitLbmAssociationName Maintenance Association Name | column | OctetString | .1.3.6.1.4.1.2272.1.69.17.1.5 |
| rcCfmTransmitLbmDestMacAddress An indication of the target MAC Address Field to
be transmitted, either:
A unicast destination MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2272.1.69.17.1.6 |
| rcCfmTransmitLbmDestMepId An indication of the target MAC Address Field to
be transmitted, either:
The Maintenance Assiciation End Point identifier of
another MEP in the same Maintenance Association | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.7 |
| rcCfmTransmitLbmDestIsMepId True indicates that MepId of the target MEP is used
for Loopback transmission.
False indicates that unicast destination MAC address
of the target MEP is used for Loopback transmi… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2272.1.69.17.1.8 |
| rcCfmTransmitLbmMessages The number of loopback messages to be transmitted. | column | Integer32 | .1.3.6.1.4.1.2272.1.69.17.1.9 |