rcIpConfGlobalEcmp7PathList

RAPID-CITY-VSP · .1.3.6.1.4.1.2272.1.8.1.6.23
MIB view Table view

Object

scalar r/w RFC1213-MIBDisplayString 
Routes to networks specified in this prefix-list
can have upto 7 ECMP path, irrespective of
ecmp-max-path configuration.

Context

MIB
RAPID-CITY-VSP
OID
.1.3.6.1.4.1.2272.1.8.1.6.23
Type
scalar
Access
readwrite
Status
current
Parent
rcIpConfGlobal
Siblings
22

Syntax

RFC1213-MIBDisplayString
Source
RFC1213-MIBDisplayString
Base type
OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
rcIpConfGlobalRipHoldDownTime
Used to set the system-wide RIP hold down time in seconds.
scalarInteger32.1.3.6.1.4.1.2272.1.8.1.6.1
rcIpConfGlobalEcmp1PathList
Routes to networks specified in this prefix-list can have upto 1 ECMP path, irrespective of ecmp-max-path configuration
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.8.1.6.10
rcIpConfGlobalEcmp2PathList
Routes to networks specified in this prefix-list can have upto 2 ECMP path, irrespective of ecmp-max-path configuration.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.8.1.6.11
rcIpConfGlobalEcmp3PathList
Routes to networks specified in this prefix-list can have upto 3 ECMP path, irrespective of ecmp-max-path configuration.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.8.1.6.12
rcIpConfGlobalEcmp4PathList
Routes to networks specified in this prefix-list can have upto 4 ECMP path, irrespective of ecmp-max-path configuration.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.8.1.6.13
rcIpConfGlobalEcmpPathListApply
This is to apply any changes in ECMP path list configuration or in the prefix-lists configured to be used as path list
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.14
rcIpConfGlobalIcmpRedirectMsgscalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.15
rcIpConfGlobalArpThreshold
Defines the maximum number of outstanding arp request a switch can generate.
scalarInteger32.1.3.6.1.4.1.2272.1.8.1.6.17
rcIpConfGlobalAllowMoreSpecificNonLocalRouteEnable
Used to determine whether more specific non local routes will go into the routing table.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.18
rcIpConfGlobalUdpCheckSumEnable
Enable/disable UDP checksum calculation
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.19
rcIpConfGlobalIcmpNetUnreach
Used to set the icmp net unreach feature enable/disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.2
rcIpConfGlobalSuperNetEnable
Used to globally enable Supernetting/ CIDR routing for IP
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.20
rcIpConfGlobalEcmp5PathList
Routes to networks specified in this prefix-list can have upto 5 ECMP path, irrespective of ecmp-max-path configuration.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.8.1.6.21
rcIpConfGlobalEcmp6PathList
Routes to networks specified in this prefix-list can have upto 6 ECMP path, irrespective of ecmp-max-path configuration.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.8.1.6.22
rcIpConfGlobalEcmp8PathList
Routes to networks specified in this prefix-list can have upto 8 ECMP path, irrespective of ecmp-max-path configuration.
scalarRFC1213-MIBDisplayString.1.3.6.1.4.1.2272.1.8.1.6.24
rcIpConfGlobalArpMcastMacFlooding
Enable/disable Ip Arp Multicast Mac Flooding feature.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.26
rcIpConfGlobalEcmpEnable
Used to set the ecmp enable/disable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.3
rcIpConfGlobalEcmpMaxPath
Used to globally configure maximum ECMP paths number.
scalarInteger32.1.3.6.1.4.1.2272.1.8.1.6.4
rcIpConfGlobalAlternativeEnable
Used to globally configure alternative enable.
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.5
rcIpConfGlobalRouteDiscoveryEnable
Enable/disable ICMP Route Discovery feature
scalarSNMPv2-TCTruthValue.1.3.6.1.4.1.2272.1.8.1.6.6
rcIpConfGlobalRipTimeOutInterval
Rip TimeOut Interval in seconds
scalarInteger32.1.3.6.1.4.1.2272.1.8.1.6.8
rcIpConfGlobalRipDefImportMetric
Rip def import metric
scalarInteger32.1.3.6.1.4.1.2272.1.8.1.6.9